[P2-SP-01] Self-standing, electrically-conductive, silane-crosslinked, symmetric alginate nanofiltration membranes: Tweaking the performance

*JAMALIAH Hani ABURABIE¹ (1. nyuad)

[P2-SP-02] Constructing discontinuous silicon-island structure with low surface energy based on the responsiveness of hydrophilic layers to improve the anti-fouling property of membranes

*Xiaolong Lu^1,2, Ronghua Ma¹, Chunrui Wu¹ (1. Tiangong University, 2. Tianjin Motimo Membrane Technology Co., Ltd.,)

[P2-SP-03] Novel Positively Charged Metal-Coordinated Nanofiltration Membrane for Lithium/Magnesium Separation

*Li Wang¹, Zhongying Wang², Chuyang Tang¹ (1. The University of Hong Kong, 2. Southern University of Science and Technology)

[P2-SP-04] In-situ grafting of hydrophilic molecules on hollow fiber membranes using electron beam modification

*Konrad H. Leopold¹, Daniel Breite¹, Andrea Prager¹, Nadja Schönherr¹, Lutz Drößler¹, Steffen Weiß¹, Martin Schmidt¹, Marco Went¹, Dirk Enke², Agnes Schulze¹ (1. Leibniz Institute of Surface Engineering, 2. Leipzig University)

[P2-SP-05] Molecular layer by layer synthesis of polyacrylonitrile-supported oligoamide membrane for efficient removal of PFAS pollutants

*Sumanta Sahu¹, Paramita Manna¹, Roni Kasher¹ (1. Ben Gurion University of the Negev, Israel)

[P2-SP-06] Preparation of COF nanoparticles-hydrogel modified membranes for removal of PFAS pollutants: Effect of COF density and hydrogel chemistry

*Xiaoke Tan¹ (1. Ben-Gurion University of the Negev)

[P2-SP-07] Nano hydrophilic layer developed by atmospheric-pressure plasma to improve dehydration performance of organosilia membranes

*Shun Aoyama¹, Hiroki Nagasawa¹, Masakoto Kanezashi¹, Toshinori Tsuru¹ (1. Hiroshima University)

[P2-SP-08] Near dissolved organic matter microfiltration membrane prepared using multifunctional porogen synthesized via metal-free atom transfer radical polymerization for highly efficient removal of particulate pollutants in water.

*Hoan Minh Tran¹, Donggyu Kwak¹, Uje Lee ¹, Seungwon Chang¹, Jaewoo Lee¹ (1. Jeonbuk National University)

[P2-SP-09] Electrified liquid separations membranes made of functionalized poly-ether ether ketone blended with polysulfone

*Abelline Fionah¹, Laura Brady², Kate McLarney¹, Lizzy Weems¹, Aviana Judd¹, Escobar Isabel¹ (1. Univ. of Kentucky, 2. Univ. of Tennessee)

[P2-SP-10] Harnessing the power of surface modification for developing nanoplastic-resistant membranes for water/wastewater treatment

*Mohadeseh Najafi Arani¹, Javad Farahbakhsh¹, Mehdi Khiadani¹, Amir Razmjou^1,2, Masoumeh Zargar^1,2 (1. School of Engineering, Edith Cowan University, 2. Mineral Recovery Research Center, School of Engineering, Edith Cowan University)

[P2-SP-11] Silk sericin-coated polyamide thin-film composite membranes with anti-scaling properties

*Younghee Jung¹, Somin Lee¹, Uje Lee¹, Hoan Minh Tran¹, Kyeongyeon Park¹, Jaewoo Lee¹ (1. Jeonbuk National University)

[P2-SP-12] Structural optimization of Pebax-based composite membrane for high-efficiency CO₂ capture

*Meigui He¹, Jing Zhao¹, Wanqin Jin¹ (1. Nanjing Tech University)

[P2-SP-13] Hybridization of advanced membrane processes for a blue economy at the water-energy nexus

*Sergio Santoro¹, Marco Aquino¹, Efrem Curcio¹ (1. University of Calabria)

[P2-SP-14] Fabrication of anti-leakage Hyflon/Poly(4-methyl-1-pentene) hollow fiber composite membrane for Extra-corporeal Membrane Oxygenation (ECMO) system

*Ting He¹ (1. Nanjing Tech University,State Key Laboratory of Materials-Oriented Chemical Engineering)

[P2-SP-15] Proton-blocking anion-exchange membranes modified by various structures of amine compounds

*JIHYEON LEE¹, MOON-SUNG KANG¹ (1. Sangmyung University)

[P2-SP-16] Development of highly crosslinked biodegradable polyethylene glycol membranes and its surface modification using inkjet printing

*Kai Ishii¹, Kento Mitsuhashi¹, Natsuko Inagaki¹, Taichi Ito¹ (1. The Univ. of Tokyo)

[P2-SP-17] Investigation of Novel Low-Fouling Polymerisable Bicontinuous Microemulsion Layer Spray Coated on UF PES Membranes for MBR Application

*Sneha De^1,2,3, Francesco Galiano², Rafaella Mancuso³, Bartolo Gabriele³, Alberto Figoli², Jan Hoinkis¹ (1. Center of Applied Research (CAR), Karlsruhe University of Applied Sciences, Karlsruhe, Germany, 2. Institute on Membrane Technology, ITM-CNR, Rende, Italy, 3. Department of Chemistry and Chemical Technology, University of Calabria, Rende, Italy)

[P2-SP-18] Advancing Water Filtration Technologies with 3D Printing: Fabrication of Surface-Patterned Membranes with Lower Organic Fouling and Higher Permeability

*Yazan Ibrahim^1,2, N. Hilal¹ (1. New York University Abu Dhabi, 2. New York University)

[P2-SP-19] Surface-confined swelling approach using in a selectivity-reinforced PVDF membrane for vanadium flow batteries

*Yihan Zhen¹, Lei Wan¹, Ziang Xu¹, Baoguo Wang¹ (1. Tsinghua University)

セッション情報

Surface Modification and Patterning