*Stefan Volz¹, Peter Groche², Jonas Launhardt³ (1. Technical University of Darmstadt, Germany, 2. Technical University of Darmstadt, Germany, 3. Technical University of Darmstadt, Germany)

*Hiroshi Noma¹, Saiko Aoki¹, Kenji Kobayashi² (1. Tokyo Institute of Technology, Japan, 2. Idemitsu Kosan Company Ltd., Japan)

*Antonio Cammarata, Tomas Polcar (Czech Technical University in Prague, Czech Republic)

Yuki Shimizu¹, *Dominik Krengel², Hans-Georg Matuttis¹ (1. The University of Electro-Communications, Department of Mechanical and Intelligent Systems Engineering, Japan, 2. University of Tsukuba, Institute of Systems and Information Engineering, Japan)

Misotoshi Sato¹, *Dominik Krengel², Hans-Georg Matuttis³ (1. The University of Electro-Communications, Japan, 2. University of Tsukuba, Institute of Systems and Information Engineering, Japan, 3. The University of Electro-Communications, Department of Mechanical and Intelligent Systems Engineering, Japan)

*Stavros Ntioudis¹, James P. Ewen¹, Daniele Dini¹, C. Heath Turner² (1. Department of Mechanical Engineering, Imperial College London, UK, 2. Department of Chemical and Biological Engineering, University of Alabama, USA)

*Joshua Montgomery, Mark Wilson, Michael Bryant, Gregory de Boer (School of Mechanical Engineering, University of Leeds, UK)

*Sophie Loehle (TotalEnergies OneTech, France)

*Kosar Khajeh, Hitoshi Washizu (University of Hyogo, Japan)

*Amran Mohamed¹, Sarah Matthews², Janet Wong¹ (1. Imperial College London, UK, 2. Shell Global Solutions, UK)

*Hannes Holey^1,2, Mohamed Tarek Elewa¹, Peter Gumbsch¹, Lars Pastewka² (1. Karlsruhe Institute of Technology, Germany, 2. University of Freiburg, Germany)

*Shubham Gupta, Arnab Chanda (Indian Institute of Technology (IIT) Delhi, India)

*Suhaib Ardah¹, Francisco J. Profito², Daniele Dini¹ (1. Imperial College London, UK, 2. Polytechnic School of the University of São Paulo, Brazil)

*Chengwei Wen, Yu Tian, Pengpeng Bai (State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, China)

*Ben Collard^1,2, Finn Giuliani², Gerwin Ingenbleek³, Guy Verbist³, Daniele Dini¹ (1. Imperial College London, dept. Mechanical Engineering, UK, 2. Imperial College London, dept. Materials Science, UK, 3. Shell Technology Centre Amsterdam, Netherlands)

*Polychronios Dellis (Assistant Professor ASPETE School of Mechanical Engineering Educators, Mechanical Engineer, PhD, NTUA, Greece)

*Sallar Ali Qazi¹, Connor Myant², Gregory de Boer³, Robert Hewson¹ (1. Department of Aeronautics, Imperial College London, UK, 2. Dyson School of Design Engineering, Imperial College London, UK, 3. School of Mechanical Engineering, University of Leeds, UK)

*Alice Marinescu^1,2, Aurelian Fatu¹, Traian Cicone² (1. University of Poitiers, France, 2. University Politehnica of Bucharest, Romania)

*Yamato Kobayashi¹, Kento Sakai¹, Shota Yoshida¹, Hideaki Kawaguchi², Hikaru Masuda², Kazuyoshi Miyagawa¹ (1. Department of Applied Mechanics and Aerospace Engineering, Waseda University, Japan, 2. Toshiba Mitsubishi-Electric Industrial Systems Corporation, Japan)

*Tasuku Masuda, Hideaki Nishida, Takaya Futae (Research & Innovation Center, Mitsubishi Heavy Industries, Ltd., Japan)

*Ke Zhang, Kazuyuki Yagi (Kyushu University, Japan)

*Nadia Nurul Nabihah Ahmad Fuad, Mohamad Ali Ahmad (Universiti Teknologi MARA Shah Alam, Malaysia)

*Michal Michalec¹, Petr Svoboda¹, Robert Jackson² (1. Brno University of Technology - Faculty of Mechanical Engineering, Czech Republic, 2. Auburn University - Department of Mechanical Engineering, USA)

*Kenta Uchida¹, Tadatsugu Imura¹, Yuichiro Tokunaga¹, Masaki Fuchiwaki² (1. Eagle Industry Co., Ltd., Japan, 2. Kyushu Institute of Technology, Japan)

Charu Mittal¹, Vivek Kumar¹, Harshrajsinh Jadeja¹, *Jianda Yao², Sravan Kumar Nallamothu¹, Pravin Nakod¹ (1. Ansys India Pvt. Ltd, India, 2. Ansys Japan K.K., Japan)

*Maxence Decote¹, Nicolas Fillot¹, David Philippon¹, Alexandre Mondelin², Guillermo E. Morales-Espejel^1,3 (1. Univ Lyon, INSA Lyon, CNRS, LaMCoS, UMR5259, 69621 Villeurbanne, France, 2. SKF Aerospace France, Châteauneuf-Sur-Isère, France, 3. SKF Research & Technology Development, SKF B.V., Houten, Netherlands)

*Clelia Righi (University of Bologna, Italy)

*Ryuichi Okamoto, Hirotoshi Akiyama, Rio Nakae, Yosuke Hamano, Hitoshi Washizu (University of Hyogo, Japan)

*Yuta Asano¹, Ryutaro Kudo¹, Arisa Chiba¹, Mizuho Yokoi¹, Masayuki Kawaura¹, Yusuke Ootani¹, Nobuki Ozawa^2,1, Momoji Kubo^1,2 (1. Institute for Materials Research, Tohoku University, Japan, 2. New Industry Creation Hatchery Center, Tohoku University, Japan)

*Mizuho Yokoi¹, Masayuki Kawaura¹, Yuta Asano¹, Yusuke Ootani¹, Nobuki Ozawa^2,1, Momoji Kubo^1,2 (1. Institute for Materials Research, Tohoku University, Japan, 2. New Industry Creation Hatchery Center, Tohoku University, Japan)

*Stefan Peeters¹, Takuya Kuwahara², Fabian Härtwig³, Stefan Makowski³, Michael Moseler^1,4, Gianpietro Moras¹ (1. Fraunhofer IWM, MicroTribology Center µTC, Wöhlerstraße 11, 79108 Freiburg, Germany, 2. Osaka Metropolitan University, 3-3-138 Sugimoto, Sumiyoshi-ku, 558-8585 Osaka, Japan, 3. Fraunhofer IWS, Winterbergstraße 28, 01277 Dresden, Germany, 4. Institute of Physics, University of Freiburg, Herrmann-Herder-Straße 3, 79104 Freiburg, Germany)

*Thomas Reichenbach¹, Gianpietro Moras¹, Lars Pastewka², Michael Moseler¹ (1. Fraunhofer IWM, MicroTribology Center μTC, Freiburg, Germany, 2. Department of Microsystems Engineering, University of Freiburg, Freiburg, Germany)

*Arnaud Duval, Efoe Wallace, Thibaut Chaise, Daniel Nélias (Univ Lyon, CNRS, INSA Lyon, LaMCoS, UMR5259, 69621 Villeurbanne, France)

*Michele Santeramo¹, Carmine Putignano¹, Georg Vorlaufer², Stefan Krenn², Giuseppe Carbone¹ (1. Department of Mechanics, Mathematics and Management, Politecnico di Bari, Bari, Italy, 2. AC2T research GmbH, Wiener Neustadt, Austria)

*Qiang Li (Technische Universität Berlin, Germany)

*Thibaut Chaise, Efoé Rodrigue Wallace, Arnaud Duval, Daniel Nélias (Univ Lyon, INSA Lyon, CNRS, LaMCoS, UMR5259, 69621 Villeurbanne, France)

*Natsuko Sugimura^1,2,3, Mizuki Era², Ryo Tsuda¹, Keito Nitta², Yuji Mihara³, Hitoshi Washizu² (1. National Institute of Technology Kagoshima College, Japan, 2. University of Hyogo, Japan, 3. Tokyo City University, Japan)

*Jun Shimizu¹, Wangpiao Lin², Naohiko Yano², Kengo Saegusa², Kazuki Kaneko¹, Libo Zhou¹, Teppei Onuki¹, Hirotaka Ojima¹, Takeyuki Yamamoto¹ (1. Ibaraki University, Japan, 2. Graduate School, Ibaraki University, Japan)

*Cheng Zheng¹, Kun Liu¹, Jimin Xu^1,2 (1. Hefei University of Technology, China, 2. Kyoto University, Japan)

*Gianpietro Moras¹, Thomas Reichenbach¹, Kerstin Falk¹, Leonhard Mayrhofer¹, Takuya Kuwahara², Konstantinos Gkagkas³, Michael Moseler^1,4 (1. Fraunhofer IWM, MicroTribology Center, Freiburg, Germany, 2. Department of Mechanical Engineering, Osaka Metropolitan University, Japan, 3. Material Engineering Division, Toyota Motor Europe NV/SA, Belgium, 4. Institute of Physics, University of Freiburg, Germany)

Ikki Yasuda, Noriyoshi Arai, *Kenji Yasuoka (Keio University, Japan)

*Guillermo E Morales-Espejel¹, Armando Félix¹, Hugo Boffy² (1. SKF, Research and Technology Development, Netherlands, 2. SKF KaM Performance Prediction, Germany)

*Tian Yuan, Kian Kun Yap, Daniele Dini (Tribology Group, Department of Mechanical Engineering, Imperial College London, UK)

*Yang Wang (Southwest Jiaotong University, China)

*Erik Weiand¹, James P. Ewen¹, Peter H. König², Steven H. Page², Francisco Rodriguez-Ropero², Yuri Roiter², Stefano Angioletti-Uberti¹, Daniele Dini¹ (1. Imperial College London, UK, 2. Procter & Gamble, USA)

*Arisa Chiba¹, Ryutaro Kudo¹, Mizuho Yokoi¹, Masayuki Kawaura¹, Yuta Asano¹, Yusuke Ootani¹, Nobuki Ozawa^2,1, Momoji Kubo^1,2 (1. IMR, Tohoku Univ., Japan, 2. NICHe, Tohoku Univ., Japan)

*Tomohiro Kinjo^1,2, Aguru Yamamoto¹, Shunsuke Mieda¹, Takeshi Aoyagi¹, Hitoshi Washizu² (1. Asahi Kasei Corporation, Japan, 2. University of Hyogo, Japan)

*Ajay Kumar, Manoj Kumar Maurya, Manjesh Kumar Singh (Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Uttar Pradesh-208016, India)

*Fionn Carman, James Ewan, Fernando Bresme, Billy Wu, Carlos Ayestaran Latorre, Daniele Dini (Imperial College London, UK)

*Ryutaro Kudo¹, Arisa Chiba¹, Mizuho Yokoi¹, Masayuki Kawaura¹, Yuta Asano¹, Yusuke Ootani¹, Nobuki Ozawa^2,1, Momoji Kubo^1,2 (1. Institute for Materials Research, Tohoku University, Japan, 2. New Industry Creation Hatchery Center, Tohoku University, Japan)

*Michael Chandross¹, N. Scott Bobbitt¹, John F Curry¹, Taisuke Ohta¹, Frank W DelRio¹, Tomas F Babuska¹, Morgan Jones², Michael T Dugger¹ (1. Sandia National Laboratories, USA, 2. University of Santa Barbara, USA)

*Yasuhiro Senda (Yamaguchi University, Japan)

*Lars Benedikt Kruse¹, Kerstin Falk¹, Michael Moseler^1,2 (1. Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany, 2. University of Freiburg, Institute of Physics, Freiburg, Germany)

*Franziska Stief^1,2, Thomas Reichenbach¹, Kerstin Falk¹, Michael Moseler^1,2 (1. Fraunhofer Institute for Mechanics of Materials IWM, Germany, 2. University of Freiburg, Germany)

*Shuhei Yamamoto¹, Kazunori Kamio¹, Sota Endo¹, Hiraku Oshima², Kosar Khajeh², Eiji Tomiyama², Hitoshi Washizu² (1. Mitsui Chemicals, Inc., Japan, 2. Univ. of Hyogo, Japan)

*Takehiro Kobayashi, Ryuichi Okamoto, Hitoshi Washizu (University of Hyogo, Japan)

*Yuta Tanaka, Tasuku Onodera (ENEOS Corporation, Japan)

*Shizhe Deng, Atsushi Kubo, Yoshitaka Umeno (The University of Tokyo, Japan)

Egheosa Ogbomo, *James Ewen, Daniele Dini (Imperial College London, UK)

*Zhaoran Zhu, James P. Ewen, Daniele Dini (Department of Mechanical Engineering, Imperial College London, UK)

*Ai Hamano¹, Hiroshi Ohashi¹, Yuki Iike¹, Yusuke Nakanishi¹, Yoriyuki Takashima¹, Hiroaki Koshima¹, Hitoshi Washizu² (1. Idemitsu Kosan Co.,Ltd., Japan, 2. Graduate School of Information Science, University of Hyogo, Japan)

*Tomohito Horio¹, Akihiro Nagoya², Tasuku Onodera², Hitoshi Washizu¹ (1. University of Hyogo, Japan, 2. ENEOS Corporation, Japan)

*Johannes Laurin Hörmann^1,2, Chengxu Liu³, Yonggang Meng³, Lars Pastewka^1,2 (1. Department of Microsystems Engineering, University of Freiburg, Georges-Köhler-Allee 103, 79110 Freiburg, Germany, 2. Cluster of Excellence livMatS, Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Georges-Köhler-Allee 105, 79110 Freiburg, Germany, 3. State Key Laboratory of Tribology in Advanced Equipment, Li Shau Kee Science and Technology Building, Tsinghua University, Haidian District, Beijing, 100084, China)