International Session

[IS] International Session(1)　Cutting-Edge Science and Technology in Additive Manufacturing（1）

Thu. Sep 21, 2023 1:00 PM - 5:30 PM Rm. A (1st Flr. Education and Research Building, School of Engineering)

Chair:Naoki TAKATA (Nagoya University, Japan), Byoungsoo LEE (KITECH, Korea), Kee-Ahn LEE (Inha Univ., Korea)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

※IS11は都合により、9月15日に演題と講演概要に変更がありました。
※IS11 has changed its abstract and presentation title to September 15.

+Add all to schedule

1:00 PM - 1:30 PM

[IS4] Controlled Directionality in 3D Printing of Reinforced Polymer Composites - A DEM Analysis

*Amit ARORA¹, Rajat MISHRA¹ (1. Advanced Materials Processing Research Group, Indian Institute of Technology, India)

1:30 PM - 2:00 PM

[IS5] An Overview of Scalable Melt-less Cold Spray Additive Manufacturing in Australia

*Saden　H. ZAHIRI¹, MuhammadFAIZAN-UR-RAB¹, Stefan GULIZIA, Peter KING¹, Daniel EAST¹ (1. Commonwealth Scientific and Industrial Research Organization, Australia)

break (2:00 PM - 2:15 PM)

2:15 PM - 2:45 PM

[IS6] Additive Manufacturing-Based Combinatorial Approach for Al-Si-Zn Interfacial Coating Layer to Improve Bonding Strength and Heat Transfer Performance in Wrought-cast Al Compound Casting

*Seungjin NAM^1,2, Minsang KIM³, Sehoon KIM³, Seok Su SOHN², *Hyunjoo CHOI¹ (1. Kookmin Univ., Korea, 2. Korea Univ., Korea, 3. Korea Automotive Technology Institute, Korea)

2:45 PM - 3:15 PM

[IS7] Fabrication of Composite Powders for Laser Additive Manufacturing

*Naoyuki NOMURA¹, Weiwei Zhou¹, Mingqi Dong¹, Zhenxing Zhou¹ (1. Department of Materials Processing, Graduate School of Engineering, Tohoku Univ., Japan)

3:15 PM - 3:45 PM

[IS8] Enhanced Mechanical Performance of Duplex Stainless Steels via Dense Core-Shell Nano-Inclusions in-situ Formed upon Selective Laser Melting

*Haokai Dong¹, Jiantao Zhang¹, Zhiyu Xiao¹ (1. South China Univ. of Technology, China)

break (3:45 PM - 4:00 PM)

4:00 PM - 4:30 PM

[IS9] L-PBF 3D Printing and Microstructural Control of Fe-Mn-Si based Shape Memory Alloy

*Wookjin LEE¹ (1. Pusan National Univ., Korea)

4:30 PM - 5:00 PM

[IS10] Materials Integration for Laser Powder Bed Fusion Process

*Makoto WATANABE¹, Tomonori KITASHIMA¹, Masahiro KUSANO¹, Houichi KITANO¹, Kaita ITO¹, Sukeharu NOMOTO¹, Dmitry BULGAREVICH¹, Jun KATAGIRI¹ (1. National Institute for Materials Science, Japan)

5:00 PM - 5:30 PM

[IS11] On the Role of Cellular Microstructure in Austenite Reversion in Selective Laser Melted Maraging Steel

Yingjie YAO¹, *Hao CHEN¹ (1. Tsinghua Univ., China)

Session information

[IS] International Session(1)　Cutting-Edge Science and Technology in Additive Manufacturing（1）

[IS4] Controlled Directionality in 3D Printing of Reinforced Polymer Composites - A DEM Analysis

[IS5] An Overview of Scalable Melt-less Cold Spray Additive Manufacturing in Australia

[IS6] Additive Manufacturing-Based Combinatorial Approach for Al-Si-Zn Interfacial Coating Layer to Improve Bonding Strength and Heat Transfer Performance in Wrought-cast Al Compound Casting

[IS7] Fabrication of Composite Powders for Laser Additive Manufacturing

[IS8] Enhanced Mechanical Performance of Duplex Stainless Steels via Dense Core-Shell Nano-Inclusions in-situ Formed upon Selective Laser Melting

[IS9] L-PBF 3D Printing and Microstructural Control of Fe-Mn-Si based Shape Memory Alloy

[IS10] Materials Integration for Laser Powder Bed Fusion Process

[IS11] On the Role of Cellular Microstructure in Austenite Reversion in Selective Laser Melted Maraging Steel

Authentication

Session information

[IS] International Session(1) Cutting-Edge Science and Technology in Additive Manufacturing（1）

Authentication

[IS] International Session(1)　Cutting-Edge Science and Technology in Additive Manufacturing（1）