2021年第82回応用物理学会秋季学術講演会

講演情報

一般セッション(口頭講演)

13 半導体 » 13.5 デバイス/配線/集積化技術

[12a-N304-1~11] 13.5 デバイス/配線/集積化技術

2021年9月12日(日) 09:00 〜 12:00 N304 (口頭)

松川 貴(産総研)

11:45 〜 12:00

[12a-N304-11] Realization of vertical p-i-n junctions composed of a two dimensional hole gas region at an FeOx/SrTiO3 interface, SrTiO3, and Nb:SrTiO3

〇(M2)Chenhao Xia1、Duc Anh Le1,2,3、Shingo Kaneta-Takada1、Masaaki Tanaka1,4、Shinobu Ohya1,3,4 (1.Tokyo Univ. Tanaka-Ohya Lab.、2.PRESTO, Japan Science and Technology Agency、3.Graduate School of Engineering, The Univ. of Tokyo、4.Center for Spintronics Research Network, The Univ. of Tokyo)

キーワード:two dimensional hole gas, vertical p-i-n junction

In this work, we have made vertical p-i-n junctions composed of a p-type electrode of the 2DHG formed at the FeOx/STO interface, non-doped STO, and Nb:STO.We first grew a thin STO layer (thickness t = 10 or 20 unit cells (uc)) on a 0.5 wt% Nb-doped STO (001) substrate using molecular beam epitaxy (MBE) with a background oxygen pressure of 2×10–4 Pa including 20% of ozone and at 750℃. Then, we deposited an ultrathin Fe layer (nominal thickness of 0.075 nm) on the STO layer and capped it with 1-nm-thick Al under a background pressure of 3×10–8 Pa at 50℃. When the sample was taken out of the MBE chamber, the Fe and Al layers became FeOx and AlOy, respectively. In this structure, the 2DHG formed at the FeOx/STO interface and the Nb-doped STO substrate play the roles of the p-type and n-type electrodes, respectively. For the measurements, we deposited a 50-nm-thick Al layer on top of the sample, and then patterned the sample into circular-shape mesas with 300 µm, 400 µm and 500 µm in diameter using photolithography and ion milling. The device structure and measurement configuration are shown in Fig. 1(a). The I - V curves obtained for the sample with t = 20 uc at various temperatures is showed in Fig. 1(b), in which the strong rectification effect is clearly seen in the whole range of temperature up to 300 K. The rectification is, however, opposite in the low bias range (|V| < 0.25 V), where a larger current is obtained in the reversed bias region. Meanwhile, in the high bias range (|V| > 0.25 V), a larger current flows in the forward bias region as in conventional diodes. This extraordinary and intriguing properties can be understood by considering a current flow by band-to-band tunneling and thermionic emission in our devices. Detailed discussions on the mechanism will be given in the talk.