2022 International Conference on Solid State Devices and Materials

講演情報

講演取消

Oral Presentation

11: Advanced Materials: Synthesis / Crystal Growth / Characterization

[B-6] Advanced materials, Nanofabrication, and Thin Films II

2022年9月28日(水) 13:30 〜 15:15 102 (1F)

Session Chair: Yu-Lun Chueh (National Tsing-Hua Univ.), Akihiko Kikuchi (Sophia Univ.)

15:00 〜 15:15

[B-6-07] [No Show] Refractory NbMoTaW High Entropy Alloy film as Diffusion Barrier for Copper/Silicon Interconnections

Chuan Feng Shih1, 〇Cheng Hsien Yeh1, Hsuan Ta Wu2, Teng Yi Huang1 (1. National Cheng Kung Univ. (Taiwan), 2. Minghsin Univ. of Sci. and Tech. (Taiwan))

Presentation style:

The NbMoTaW high entropy alloy (HEAs) films with equal proportion and excellent single-phase solid solution were fabricated by DC magnetron sputtering. A 70 nm-thick NbMoTaW film shows excellent thermal stability and maintains good electrical properties about 75 μΩ-cm after 500°C annealing. A 15 nm-thick NbMoTaW film was prepared as a diffusion barrier. It was found that the structure is complete, and no diffusion occurs after 500℃ annealing. Moreover, Cu/HEAs/Si interface become obscure slightly after 700℃ annealing that is superior to the Cu/Ti/Si interface, which become rough at 500℃. It indicates that the critical point of failure of the HEA diffusion barrier was improved. The results also suggest a high opportunity of NbMoTaW film to replace the conventional Ti, Ta and other binary alloys/nitrides with the advantages of low resistivity and thermal stability, being a potential candidate in Cu/Si interconnects as a diffusion barrier.

Abstract password authentication.
Password to download abstracts has been informed in the confirmation mail.

パスワード