2024年粉末冶金国際会議

講演情報

General Sessions (Oral) » T17 Composite/Hybrid Materials

[T17] Composite/Hybrid Materials

Oral

2024年10月16日(水) 15:50 〜 17:10 Room D (3F 304, Conference Center)

Chairpersons: Masayoshi Fuji (Nagoya Institute of Technology, Japan), Katsuhisa Tanaka (Kyoto University, Japan)

16:50 〜 17:10

[16D-T17-04] Preparation, Microstructure, and Thermal Properties of Aluminum/Carbon Composites

*L. Yi1, T. Onda1, Z. Chen1 (1.Department of Mechanical and Aerospace Engineering, Graduate School of Engineering, Tottori University, Japan)

キーワード:aluminum/carbon composites, microstructure, thermal conductivity, coefficient of thermal expansion

Aluminum (Al)/carbon composites are considered to be promising thermal management materials. In this work, highly densed Al/graphite, Al/carbon fibers (CFs), and Al/graphite/CFs composites were successfully prepared by a hot extrusion process. Besides, small amounts of Al-Si alloy addition and Ni-coating were applied to improve the interfacial bonding between Al matrix and carbon in the composites. The microstructure, thermal conductivity (TC), and coefficient of thermal expansion (CTE) of the hot-extruded Al/carbon composites were investigated. The results showed that hot extrusion can lead to deformation of graphite and align the graphite and CFs along the extrusion direction. Al-Si alloy addition and Ni-coating can effectively improve the Al/carbon interfacial bonding, thus decreasing the interfacial thermal resistance. The Al/graphite composites showed relatively high TC and CTE values, while the Al/CFs composites exhibited relatively low TC and CTE values. In contrast, the Al/graphite/CFs hybrid composites presented an excellent balance between TC and CTE.