test

Poster Abstract
Yasuhito Kawahara_Influence of nitrogen addition on the temperature dependence....pdf
Satoshi Noguchi_Characterization and generation of material microstructures....pdf
Ayano Kita_Monte Carlo simulation on grain growth in dual phase microstructure....pdf
Yoshihisa Mino_Bayesian optimized cellular automaton modeling....pdf
Yutaro Suzuki_Abnormal Goss grain growth in pure iron....pdf
Hao_Wu_δ–pearlite_Reaction_by_Carburization_in_Fe-Cr_Binary_Alloy.pdf
Yulin Xie_Surface hardening and nano-sized clustering during low temperature....pdf
Shotaro Jimbo_3-dimensional morphology of upper and lower bainite....pdf
Kazuki Okayasu_Spheroidization of Lamellae Cementite in Pearlitic Steel....pdf
Miku Watanabe_Heterogeneous chemistry and size of retained austenite....pdf
Chang Jiang_in austempered Fe-2Mn-1.5Si-0.4C alloy steel for bolts.pdf
Chao Yang_Elimination of orientation inheritance in a CrNiMoV steel.pdf
Daiki Terazawa_The effect of austenite recrystallization to B segregation....pdf
Koyo Ohga_Characteristics of retained austenite formed by friction stir welding....pdf
Hojun Gwon_Martensitic transformation induced by electro-chemical polishing....pdf
Yosuke Nonaka_Fracture toughness prediction model for TiN-ferrite steels.pdf
Delphic Chen_Abnormal grain growth in martensitic steel.pdf
Po-Yu Chen_The effect of precipitate size on magnetic properties....pdf
Xue Bai_The influence of pre-plating on the LME phenomenon....pdf
Jingliang Wang_First-principles study on the P-induced embrittlement....pdf
Xuelin Wang_Microstructure evolution of heat affected zone in submerged arc welding....pdf
S1Y10_Kawamoto Yuzo_Effect of Nb and Mo on the morphorogy of lath martensite.pdf
S1Y13_Haokai Dong_A comparative study on intrinsic mobility of incoherent and semicoherent interfaces during the austenite to ferrite transformation.pdf
S2S01_Simoon Sung_Molecular Dynamics Approaches for Migrating Boundary Induced Plasticity of Iron.pdf
S2S02_Kyung Mun Min_Computational approach for predicting anisotropy and formability of thermomechanically.pdf
S2S05_Woojin Cho_Bake hardening behavior accompanying yield point phenomenon in low carbon steel.pdf
S2S06_Ta-Te Chen_Computer-aided estimation of plastic properties using instrumented indentation test.pdf
S2S07_Yuxiong Zhou_Relationship between hall-petch coefficient and grain boundary segregation of carbon and nitrogen in ferritic steel.pdf
S2S08_Sien Liu_Numerical study on the effect of interfacial energy on the interfacial strength and work of adhesion of bcc-Fe tilt interfaces.pdf
S2S09_Viola Paul_Nanomechanical Analysis of SUS304L Stainless Steel with Bimodal Distribution in Grain Size.pdf
S2S10_Tianze Ma_Grain refinement strengthening in Si-C combined added ferritic steel.pdf
S2S11_Chao Lin_Microstructure and Mechanical Properties of Resistance Spot Welding Joints Between Two Hot Stamping Boron Steels and DP1180 steel.pdf
S2S13_Tinghui Man_Deformation behaviors and fracture mechanism in medium Mn forged steels.pdf
S2S14_Ryota Hamana_Mechanical behavior of Si-alloyed interstitial free steels investigated by pop-in analysis during nanoindentation.pdf
S2S15_bo Zi WANG_Effect of aging temperature on microstructure and mechanical properties of microalloyed steel for cold heading bolt.pdf
S2Y01_Elango Chandiran_Deformation behaviour of two different types of medium carbon bainitic steel designed by Sparse Mixed Regression Model (SMRM).pdf
S2Y02_Miyuri Kameya_Hydrogen Absorption Behavior and Absorbed Hydrogen Trapping Sites in Rolling Contact Fatigue.pdf
S2Y03_Takayuki Shiraiwa_Exploration of optimal microstructure for improving strength and ductility of dualphase steels.pdf
S2Y04_Chiharu Kura_Atomistic calculations of the interaction Atomistic calculations of the interaction tilt grain boundaries in iron.pdf
S2Y05_Haruka Yoshida_Effect of hardenability on anisotropic deformation of cylinder of steel in carburized quenching process.pdf
S2Y06_Fabien Briffod_Micromechanical investigation of ductile void nucleation in dual-phase steels with varying microstructure.pdf
S2Y07_Yuji Sakiyama_Evaluation of residual stress on circular Evaluation of residual stress on circular.pdf
S2Y08_Kohei Nakada_The work-hardening behavior of pearlite under strain path changes.pdf
S2Y09_Seung-Yong Lee_Characterization of the Portevin-Le Chatelier Effect in Austenitic Stainless Steel using High-Temperature Digital Image Correlation Analysis.pdf
S2Y10_Hiromi Oyamada_Creep Properties of High Chromium Steel Weld Metals.pdf
S2Y11_Junya Tobata_Elastic limit of martensite steel sheet containing retained austenite.pdf
S2Y12_Yoshiyasu Kawasaki_Effects of Tensile Testing Temperature on Mechanical Properties and Deformation Behavior in Medium Mn Steels.pdf
S2Y13_Wenqi Mao_Effect of ultra-grain refinement on deformation behavior of Fe-24Ni-0.3C metastable austenitic steel.pdf
S2Y14_Lavakumar Avala_Global and local deformation behavior of ferrite + martensite + austenite steel analyzed by in-situ X-ray diffraction and digital image correlation (DIC) method.pdf
S3S01_Gaoge Xue_Three-dimensional observation of small fatigue cracks growth process in a beta titanium alloy Ti-22V-4Al using multiscale synchrotron radiation computed tomography.pdf
S3S02_Takuya Yamazaki_The formation process of multiple facets in internal fatigue fractures of (α+β) Ti-6Al-4V.pdf
S3S03_Sourav Kumar Modi_Estimation of fatigue life for internal cracks using crack growth rates measured in a vacuum environment.pdf
S3Y01_Satoshi Maeda_Influence of shearing condition on delayed fracture of sheared edge of 1470 MPa grade steel.pdf
S3Y02_Fumiyoshi Yoshinaka_Enhanced plastic fatigue durability of Fe-Mn-Cr-Ni-Si bidirectional-TRIP steel.pdf
S3Y03_Rama Srinivas Varanasi_Hydrogen embrittlement susceptibility of a 1.5GPa class dual phase steel evaluated by using U-bend specimens.pdf
S3Y04_Mariko Kadowaki_First-Principles Investigation on the Beneficial Effect of Interstitial Carbon on Steel Corrosion.pdf
S3Y05_Naoya Ihara_Crack propagation behavior in rotational bending fatigue test of soft nitrided JIS SCM420 steel.pdf

Oral Abstract

Mahesh Chandra Somani_Recent Advances in Design and Processing of Novel Ultrahigh Strength Steels for Arctic Applications.pdf
Toshio Ogawa_Characterization of recrystallization behavior in pure iron and low-carbon steel by three-dimensional microstructural analysis.pdf
Yong Jie Yang_Primary recrystallization texture development in grain-oriented silicon steel.pdf
Ling Zhang_Mechanical property of a low carbon steel containing 2 wt%Nb.pdf
Wei Wang_Obtaining the Solubility Product of TiN in Austenite by Measuring the Grain Growth at Elevated Temperatures.pdf
Yuya Murata_A precise measurement of grain boundary segregation in steel by STEM-EDS and ζ-factor method.pdf
Hui_Guo_Enhanced_carbon_enrichment_in_austenite_through_introducing_pre_existing_austenite_as_a‘carbon_container’in_0.2C_2Mn_steel_the_significant_impact_on_microstructure_and_mechanical.pdf
Hideyuki Ohtsuka_First-principles calculation of the atomic interaction and tetragonality in an Fe-C system.pdf
Yasunobu Nagataki_State-of-the-art ultra-high-strength steel sheets for automobile application.pdf
Munekazu Ohno_Formation of coarse columnar austenite grains during solidification of peritectic steels.pdf
Shuang Xia_The effects of grain boundary character distribution on the mechanical properties of a 316L stainless steel.pdf
Yutaka Neishi_Higher performance of special steel bars & wire rods by inclusion morphology control.pdf
Naoya Shibata_Development of atomic resolution electron microscope for magnetic materials and steels.pdf
Jae Hoon Jang_Atomistic investigation of clustering and precipitation in Nb-microalloyed steel.pdf
Wu Gong_In situ neutron diffraction study on lattice parameter changes of austenite and martensite during transformation in Fe-18Ni alloy.pdf
Christopher Hutchinson_Mechanical stability of austenite in advanced high strength steels.pdf
Hao Chen_Mechanism of austenite reversion in additive manufactured ultra high strength steels.pdf
Maria J. Santofimia Navarro_Investigating the formation of bainite in the presence of martensite.pdf
Kyung-Tae Park_Tensile Fracture of High Mn TWIP steel.pdf
Hung-Wei (Homer) Yen_Nanomicrostructural engineering in lightweight high-entropy steel with multiple characteristics.pdf
Dong-Woo Suh_Heterogeneity driven enhanced tensile properties in martensitic steels.pdf
Norimitsu Koga_Low-temperature tensile properties of aged ultra-low carbon steels.pdf
Myeong-heom Park_Local deformation behavior of ferrite + martensite dual-phase steels with different martensite hardness.pdf
Shiro Torizuka_MECHANICAL PROPERTUES of SINGLE VARIANT MARTENSITE from FERRITE + Mn-RICH CEMENTITE STRUCTURE in 0.1C-2Si-5Mn STEELS.pdf
Yuuji Kimura_Delayed Fracture Behavior of Ultrahigh-Strength Low-Alloy Steel Processed by Warm Tempforming .pdf
Yoshikazu Todaka_Hydrogen Embrittlement Behavior of Nanostructured SUS316LN Austenitic Stainless Steel Produced by Heavy Cold-rolling and High-pressure Torsion Straining.pdf
Shimpei Yoshioka_Formation of inhomogeneous microstructure in martensitic steel during cooling and its effect on yield strength.pdf
Osamu Idohara_Estimation of true hardness in as-quenched martensite without the effect of auto-tempering.pdf
Hiroyuki Kawata_Grain refinement strengthening on Fe18Ni low carbon lath martensite.pdf
Masato Wakeda_Atomistic modeling and analysis of dislocation behaviors near grain boundary in iron.pdf
Genichi Shigesato_Microstructure control in high toughness steel plate.pdf
Noriyuki Tsuchida_Improvement of mechanical properties from the viewpoint of stress partitioning.pdf
Jeongho Han_The possibility of improved cryogenic toughness of medium-Mn steelfriction stir welding.pdf
Masaki Tanaka_Delamination in wire-drawn pearlitic steels.pdf
Nobuo Nakada_Heterogeneous cleavage fracture of lath martensite induced by Bain strain.pdf
Emmanuel De Moor_Double Soaking of Medium Manganese Steels.pdf
Nobuhiro Tsuji_Possibility of fully recrystallized ultrafine grained steels managing both high strength and large ductility.pdf
Elena V. Pereloma_Uncovering the relationships between processing parameters, interphase precipitation and strengthening of ferritic high strength low alloy steels.pdf
Dirk Ponge_Hydrogen embrittlement in high-strength medium- and high-Mn steels from fundamental understanding to new H-resistant microstructure design.pdf
Heung Nam Han_Mechanistic view on electric current induced kinetic enhancement and its various examples in steels.pdf
Sung-Joon Kim_Role of C and N in Austenitic Stainless Steel.pdf
Chengjia Shang_The insights from crystallography into the effect of boundaries on the toughness in a heavy gauge high strength low alloy steel.pdf
Setsuo Takaki_Yielding mechanism in polycrystalline ferritic steel.pdf
Nobuaki Sekido_Nano-SIMS observation on the boron segregation evolution during tempering of a hear resistant ferritic steel.pdf
Yoshiaki Toda_Improvement in Creep Strength of Precipitation Strengthened Ferritic Steels.pdf
Tomotaka Hatakeyama_Effect of microstructure change on the creep deformation behavior of 18Cr-9Ni-3Cu-Nb-N steel.pdf
Shengde Zhang_Microstructure and Mechanical Properties of Long-term Used Super 304H Steel Boiler Tubes.pdf
Mariko Kadowaki_Roles of Interstitial Elements in Anodic Dissolution Resistance of Martensitic Steels.pdf
Kotaro Doi_Corrosion Behavior of Steel Rebar in Concrete Studied with Hyperbaric-oxygen Accelerated Corrosion Test.pdf
Motomichi Koyama_Plastic deformation and dislocation motion at a fatigue crack tip of a bi-modal Ti-6Al-4V alloy during dwell loading.pdf
Hideaki Nishikawa_Understanding the effect of microstructure on fatigue properties of weld heat affected zone of low carbon steel based on microscopic fatigue crack initiation .pdf
Hong Luo_Research progress on hydrogen embrittlement in iron-contained high-entropy alloys.pdf
Shusaku Takagi_Various research of hydrogen embrittlement evaluationbr methods for high strength steels.pdf
Tomohiko Hojo_Evaluation of hydrogen embrittlement properties of ultrahigh-strength TRIP-aided steels.pdf
Masatsugu Yaguchi_Microstructure and creep strength of grade 91 steel under long-term service condition.pdf
Masatoshi Sakairi_Effects of metal cation on corrosion of structural metals in aqueous environments.pdf
Yoshinao Hoshi_3D impedance spectroscopy to investigate film growth rate of chromate film formed on steel.pdf
Fumio Yuse_Corrosion resistant steel for bridges and life cycle cost.pdf
Yusuke Tsutsumi_Fundamentals of corrosion engineering of metallic materials and development of ultrahigh corrosion resistant stainless steels by novel laser techniques.pdf
Hisao Matsunaga_Various strength properties of low-alloy steels in high-pressure hydrogen gas and their hydrogen compatibility.pdf
Young-Kook Lee_Effects of microstructure and deformation on the hydrogen embrittlement of a pearlitic steel.pdf
Takashi Nakamura_In situ observation of small fatigue cracks in high-strength metals using synchrotron radiation micro and nano computed tomography.pdf