[B-1-1] Improvement in quality of machined surfaces using shape information generated by CAD

〇Kiwamu Saito¹, Yosuke Ootomo¹, Masako Sudo¹, Osamu Hanaoka¹ (1.FANUC corporation)

[B-1-2] Proposal of a Framework for Empirical Modelling of Complex Machining Phenomena

〇Adirake Chainawakul¹, Koji Teramoto¹, Zejian Wu¹, Takahiro Katsube¹ (1.Muroran Institute of Technology)

[B-1-3] Real time end milling simulator for cutting force monitoring

〇Kazuki Kaneko¹, Isamu Nishida¹, Ryuta Sato¹, Keiichi Shirase¹ (1.Kobe university)

[B-1-4] Study on high quality cutting on slot liner in EV motor

〇Teppei Onuki¹, Libo Zhou¹, Hiroshi Matahira², Kenichi Nakayama², Hideaki Onozuka², Jun Matsui², Jun Shimizu¹, Hirotaka Ojima¹ (1.Ibaraki University, 2.Hitachi automotive systems, Ltd. )

[B-1-5] Surface Roughness of Finished Surface by Processing with Short Pulse Laser

〇Kosuke Hasegawa¹, Xiaoxu Liu¹, Satoru Maegawa¹, Fumihiro Itoigawa¹ (1.Nagoya Institute of Technology)

[B-1-6] Effects of double rake angle tool in low-speed cutting of high-purity iron

〇Junya Sezutsu¹, Fumihiro Itoigawa¹, Shinya Hayakawa¹, Satoru Maegawa¹, Xiaoxu Liu¹ (1.Nagoya Institute of Technology)

[B-1-7] Drilling performance and behavior of cutting edge shape of diamond-coated carbide drill in drilling of zirconia ceramics

〇Masato Okada¹, Fuya Yoshimoto¹, Hidehito Watanabe², Takuya Miura¹, Masaaki Otsu¹ (1.University of Fukui, 2.UNION TOOL CO.)

[B-1-8] Effect of edge radius on surface finishing with end mill

〇Yuki Inoue¹, Fumihiro Uchiyama¹, Ryota Uchiyama¹, Takashi Matsumura² (1.Uchiyama Hamono. Co.,Ltd, 2.Tokyo Denki University)

[B-1-9] Residual stress characteristics on machined surface machined by Low Frequency Vibration-cutting

〇Yo Kamada¹, Hiroyuki Sasahara¹ (1.Tokyo University of agriculture and technology)

[B-1-10] Application of Metal Cutting Process to Improvement of High Performance Stainless Steel

〇Fumihisa Nagashima¹, Yuki Nakagawa¹, Masahiko Yoshino¹ (1.Tokyo Institute of Technology)

[B-1-12] Empirical investigation and Modelling of Work Tool interface Temperature in machining of Inconel 718 under different cooling conditions

〇Krishan Chanaka Wickramasinghe¹, Hiroyuki Sasahara¹ (1.Tokyo University of Agriculture and Technology)

[B-1-13] Thermomechanical modeling of the stress state in the chip formation zone considering the built-up layer and built-up edge formation

〇Xiaoqi Song¹, Haruto Fujita¹, Yukio Takahashi¹, Weiming He², Tohru Ihara¹ (1.Chuo University, 2.University of Shanghai for Science and Technology)

[B-1-14] Improvement of Finished Surface Roughness Based on Knowledge from Visualization of Built-up Edge Behavior

〇Yusaku Ando^1,2, Yuki Sumiya², Tomonori Ishihara², Yasuhiro Oba², Fumihiro Itoigawa¹ (1.Nagoya Institute of Technology, 2.DENSO CORPORATION)

[B-1-16] Performance of High Pressure Coolant in Interrupted Cutting of Inconel 718

〇Chi Hsin Liu¹, Tatsuya Sugihara¹, Toshiyuki Enomoto¹ (1.Osaka University.)

[B-1-17] Effect of Liquid Lanolin as a Lubricant on the Cutting Performance in MQL Machining of Titanium Alloy

〇Toshiaki Wakabayashi¹, Hiroya Isozaki ¹, Yusuke Mimura¹, Toshifumi Atsuta², Yasuharu Matsushima² (1.Kagawa University, 2.Kagawa Prefectural Industrial Technology Center)

[B-1-18] Elucidation of Influencing Factors for Lubrication in Intermittent Cutting with Very Short Cutting Duration

〇Yoshiki Nakamura¹, Fumihiro Itoigawa¹, Shinya Hayakawa¹, Satoru Maegawa¹, Xiaoxu Liu¹ (1.Nagoya Institute of Technology)

[B-1-19] A Novel Design Concept of Tuned Mass Damper for Chatter in End Milling Process

〇Yutaka Nakano¹, Takumi Kobayashi¹, Hiroki Takahara¹ (1.Tokyo Institute of Technology)

[B-1-20] Development of a Rapid Chatter Detection System

〇Ryosuke Ikeda¹, Kazuki Takahei¹, Tomoya Fujita¹ (1.Mitsubishi Electric)

[B-1-21] Chatter Vibration and Machined Surface Properties in Turn-milling

〇Masahiro Makino¹, Koji Utsumi², Hiroyuki Sasahara¹ (1.Tokyo University of Agriculture and Technology, 2.Hitachi, Ltd.)

[B-1-22] Investigation of Search Range for Suppression of Chatter Vibrations by Randomized algorithm

〇Takaya Kondo¹, Jumpei Kitayama², Shintaro Mizuno¹, Hirohisa Narita¹, Takashi Kubo¹ (1.Meijo University, 2.YAMAZAKI MAZAK Corporation)

Session information

B-1 Advanced cutting technologies