[C-1-1] Simulation of power consumption during machine tool operation from NC data

〇Fumiya Arai¹、Akio Hayashi¹、Yoshitaka Morimoto¹ (1.Kanazawa Institute of Technology)

[C-1-2] Power Consumption Simulation of Feed Drive System Driven by a Ball Screw Considering with the Motor Efficiency Changes

〇Massimiliano Rigacci¹、Ryuta Sato¹、Keiichi Shirase¹ (1.Kobe University)

[C-1-3] Stability of Endmill Processing by Servo Feed Drive under Electric Power Saving Condition

〇Mikio Nito¹、Toshiki Hirogaki¹、Eiichi Aoyama¹ (1.Doshisha University)

[C-1-4] Development of an Online Identification System for System Identification of Machine Tool Dynamics

〇Tomoya Fujita¹、Tiandong Xi²、Sebastian Kehene²、Marcel Fey²、Christian Brecher² (1.Mitsubishi Electric Corporation、2.RWTH Aachen University)

[C-1-5] The effect of screw locking methods and anchor bolt design on CNC machine tools

〇Li-Wei Tseng¹、Cheng-Yan Wu¹、Hao-Yu Tsai¹、Cheng-Hao Chung¹、Wei-Lun Huang² (1.National Changhua University of Education、2.Precision machinery research & development center)

[C-1-6] Design of a Self-compensating Restrictor for Hydrostatic Bearings by Multilayer Perceptron

〇Chao-Chun Cheng¹、Yu-Hsiu Huang¹、Cheng-Kuo Sung¹ (1.National Tsing Hua University)

[C-1-7] Performance Evaluation and Sensitivity Analysis of a 3-UPU Parallel Kinematic Manipulator

Yu-Jen Chiu²、〇Tien-Hung Huang¹、Chih-Hsuan Hsiang¹、Pei-Hung Yang¹、Yan-Sung Chen¹、Cheng-Kuo Sung¹ (1.National Tsing Hua University、2.Taipei City University of Science and Technology)

[C-1-8] Multi-encoder-based cutting force estimation with Kalman filter in machine tools with multiple-inertia dynamics

〇Keisuke Yamamoto¹、Shuntaro Yamato¹、Yasuhiro Kakinuma¹ (1.Keio University)

[C-1-9] Kinematic Smoothing for Singularity Avoidance in 5-axis Machining

〇Shingo Tajima¹、Burak Sencer²、Hayato Yoshioka¹ (1.Tokyo Institute of Technology、2.Oregon State University)

[C-1-10] Effect of anisotropy of dynamic characteristics of cutting system on vibration stability

〇Takaaki Hashimoto¹、Daisuke Kono²、Masataka Furusawa²、Atsushi Matsubara² (1.JTEKT Corporation、2.Kyoto University)

[C-1-11] Fast Parameters Identification of Process-Machine Interaction Model in Milling

〇Kazuki Takahei¹、Ryosuke Ikeda¹、Tomoya Fujita¹、Satoshi Miwa²、Norikazu Suzuki² (1.Mitsubishi Electric Corporation、2.Nagoya University)

[C-1-12] Reduction of the influence on machining surface caused by tool non-repeatable run-out of rolling bearing spindle for machine tools

Evaluation of effectiveness of NRRO reduction on machining surface by an excitation system

〇Yuta Showa^1,2、Hayato Yoshioka² (1.Makino Milling Machine CO., LTD.、2.Tokyo Institute of Technology)

[C-1-13] Suppression of Chatter Vibration using a Tailstock with an Eddy Current Brake

〇Madoka Nakao¹、Keigo Takasugi¹、Naoki Asakawa¹ (1.Kanazawa University)

[C-1-14] Study on machine tool spindle with excellent thermal stability

〇Akihiro Tojo¹、Daisuke Kono¹ (1.Kyoto University)

[C-1-15] Reduction of the 3rd-harmonic noise in the output signal of a magnetoresistance sensor

〇Tun-Che Wu¹、Chin-Yuan Huang¹、Cheng-Kuo Sung¹ (1.National Tsing Hua University)

[C-1-16] Experimental Verification of Contactless Dynamic Spindle Testing by Eddy Current Brake

〇Hitomi Sakai¹、Keigo Takasugi¹、Naoki Asakawa¹ (1.Kanazawa University)

[C-1-17] Condition of machining feasibility of five-axis machine tools with slanted rotary axes

〇Naoki Wakai¹、Keigo Takasugi¹、Naoki Asakawa¹ (1.Kanazawa University)

[C-1-18] Simulation of Cubic-machining Tests by Five-axis Machining Center with the Consideration of Workpiece Coordinate System

〇Zongze Li¹、Ryuta Sato¹、Keiichi Shirase¹、Shigehisa Sakamoto² (1.Kobe University、2.Kumamoto University)

[C-1-20] Study on features and smart functionality of sheet metal parts for machine tools

〇Yohei Yamaguchi¹、Toshiki Hirogaki²、Eiichi Aoyama² (1.DMG MORI SEIKI CO.,LTD.、2.Doshsha University)

[C-1-21] Cutting-Trace Shape Control of Machined Surface by Radius End Mill with a Five-Axis-Controlled Machine Tool

〇Junya Hanayama¹、Toshiki Hirogaki¹、Eiichi Aoyama¹ (1.Doshisha University)

セッション情報

C-1 Advanced machine tools and elements