Rong Mu, *Bin Li (Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China)

*Fengchang Lin¹, Shintaro Itoh^1,2, Kenji Fukuzawa¹, Naoki Azuma^1,3, Hedong Zhang¹ (1. Nagoya University, Japan, 2. JST PRESTO, Japan, 3. JST ACT-X, Japan)

*Antonio Papangelo^1,2, Michele Ciavarella^1,2 (1. Politecnico di Bari, DMMM, Bari, Italy, 2. Hamburg Univ. of tech., Dept. Mech., Hamburg, Germany)

*Susheel Kumar, Manjesh Kumar Singh, Krishnacharya Khare (Indian Institute of Technology Kanpur, India)

*Yuanzhe Li, Junichiro Shiomi (The University of Tokyo, Japan)

*Haytam KASEM¹, Israel Dvir¹, Kareem Abed-Rabo¹, Leonid (Arieh) Kandel², David Segal² (1. Depart. of Mechanical Engineering, Azrieli College of Engineering, Jerusalem, Israel, 2. Depart. of Orthopedic Surgery, Hadassah Mount Scopus Hospital, Jerusalem, Israel)

*Wenxiao Li¹, Takehiro Morita^1,2, Seido Yarimitsu¹, Yoshinori Sawae^1,2,3 (1. Departure of Mechanical Engineering, Kyushu university, Japan, 2. International Institute for Carton-Neutral Energy Research, Kyushu University, Japan, 3. Advanced Research Center for Biomechanics, Kyushu University, Japan)

*Takumi Sato, Ryu Kaisaku, Takehiro Morita, Seido Yarimitsu, Yoshinori Sawae (Kyushu University, Japan)

*Fangcheng Zhong¹, Kazuhiro Nakashima¹, Yoshinori Sawae² (1. Toyo University, Japan, 2. Kyushu University, Japan)

*Kazuhiro Nakashima (Toyo University, Japan)

*Allison L Chau¹, Sophia J. Bailey², Kseniia Karnaukh², Javier Read de Alaniz², Angela A. Pitenis¹ (1. University of California Santa Barbara, Materials Department, USA, 2. University of California Santa Barbara, Department of Chemistry and Biochemistry, USA)

*Vasily Rublev, Marc Masen, Philippa Cann (Imperial College London, UK)

*Yuka Kakitani, Hironori Shinmori, Seido Yarimitsu, Yoshinori Sawae (Kyushu University, Japan)

*Kazumasa Inoue¹, Kodai Masano¹, Hironori Shinmori¹, Seido Yarimitsu¹, Takehiro Morita¹, Yoshitomo Nakata², Yoshinori Sawae¹ (1. Kyushu University, Japan, 2. NIPPON SHOKUBAI CO.,LTD., Japan)

*Hironori Shinmori, Kazuyo Hara, Takehiro Morita, Seido Yarimitsu, Yoshinori Sawae (Kyushu University, Japan)

*Rosa Maria Espinosa-Marzal (University of Illinois at Urbana-Champaign, USA)

*Etienne Louyot^1,2, Luc Carpentier¹, Eric Chatelet², Francesco Massi³, Pierre-Henri Cornuault¹, Benyebka Bou-Saïd² (1. Femto-ST Institute, Department of Applied Mechanics, CNRS/UFC/ENSMM/UTBM, Univ. of Bourgogne Franche-Comté, Besançon 25000, France, 2. Univ Lyon, INSA Lyon, CNRS, LAMCOS, UMR5259, 69621 Villeurbanne, France, 3. Dept. of Mechanical and Aerospace Engineering, University of Rome "La Sapienza", Italy)

*David Nečas¹, Martin Vrbka¹, Petr Štěpán², Ivan Křupka¹, Martin Hartl¹ (1. Brno University of Technology, Czech Republic, 2. Contipro, Czech Republic)

Fida Majdoub¹, Michel Belin², *Joël Perret-Liaudet² (1. LabECAM, ECAM La Salle, University of Lyon, France, 2. Laboratory of Tribology and System Dynamics, École Centrale de Lyon, University of Lyon, France)

*Xue Zhou^1,2, Yiyuan Li², Yu Tian¹, Marc Masen³, Yuanzhe Li¹, Zhongmin Jin^2,4 (1. Tsinghua University, China, 2. Southwest Jiaotong University, China, 3. Imperial College London, UK, 4. University of Leeds, UK)

*Siti hartini binti Hamdan¹, Izzati Binti Halid¹, William Chong Woei Fong², Shaidatul Najwa binti Mohamad¹, Norilhamiah binti Yahya³ (1. Section of Technical Foundation, Universiti Kuala Lumpur Malaysia Institute of Chemical and Bioengineering Technology (MICET), Alor Gajah, Melaka, Malaysia, 2. Automotive Development Centre (ADC), Institute for Vehicle Systems and Engineering (IVeSE), Universiti Teknologi Malaysia (UTM), Johor Bahru, 81310, Johor, Malaysia, 3. Section of Environmental and Polymer Engineering Technology, Universiti Kuala Lumpur Malaysia Institute of Chemical and Bioengineering Technology (MICET), Alor Gajah, Melaka, Malaysia)

*Hikaru Tokuue, Masayuki Ochiai, Fumiya Imai, Nobuki Osawa (Tokai University, Japan)

*Ryota Tashiro, Yoshiyuki Kume, Kazushi Miyamoto, Yuta Nakashima, Yoshitaka Nakanishi (Kumamoto University, Japan)

*Jack Hayes¹, Jennifer Andrews², Claire Higgins³, Marc Masen¹ (1. Imperial College London, UK, 2. University of Salford, UK, 3. Imperial College London, UK)

*Xuan Wang, Ben Clarke, Matt Carre, Roger Lewis (University of Sheffield, UK)

*Haruto Gato¹, Kaisei Sato^2,1, Shinya Sasaki¹ (1. Graduated School of Tokyo University of Science, Japan, 2. Tokyo University of Science, Japan)

*Lisa Katoh, Koshi Adachi (Department of Mechanical Systems Engineering, Graduate School of Engineering, Tohoku University, Japan)

*Righdan Mohsen Namus^1,2, Yunus Azakli², Mark Rainforth² (1. Wasit University, Iraq, 2. The University of Sheffield, UK)

*Arshad Kalathil Ashik¹, Carmine Putignano², Daniele Dini¹ (1. Department of Mechanical Engineering, Imperial College London, UK, 2. Department of Mechanics, Mathematics and Management,Politecnico di Bari, Italy)

*Kartik Pondicherry¹, Paul Staudinger¹, Julius Heinrich² (1. Anton Paar GmbH, Austria, 2. Anton Paar Germany, Germany)

*Fan Meng, Seiga Sakai, Hiroaki Tsujinoue, Noriyoshi Arai (Keio Univeristy, Japan)

*Pankaj Tomar^1,2 (1. IGDTUW, Delhi, India, 2. GGSIPU, New Delhi, India)

*Yutaro Doi, Chao Ju, Yu Chao Liu, Yuta Nakashima, Nakanishi Yoshitaka (Kumamoto University, Japan)

*Mariyam Jameelah Ghazali¹, Hasrawati Abu Hassan¹, Che Husna Azhari² (1. Universiti Kebangsaan Malaysia, Malaysia, 2. Entruss Ventures Sdn Bhd, Malaysia)

*Kuilin Meng¹, Yongjian Li¹, Haosheng Chen¹, Xiaobing Zheng¹, Yumiao Wang², Jianye Zhou² (1. Tsinghua University, China, 2. National Center for Cardiovascular Diseases, Fuwai Hospital, Peking Union Medical College Hospital, Chinese Academy of Medical Sciences, China)

*Manoj Murali, Marc Arthur Masen, Philippa Cann (Imperial College London, UK)

*Tadas Matijošius^1,2, Laurynas Staišiūnas², Svajus Joseph Asadauskas², Juozas Padgurskas¹ (1. Vytautas Magnus University, Lithuania, 2. State research institute Center for Physical Sciences and Technology , Lithuania)

Ladislav Zelenka¹, Jiří Voloch¹, Milan Zelenka¹, Jan Pavlík¹, Marek Večeř², Sergio Armada³, Szymon Bernat³, *Petr Stavárek⁴ (1. Biona Jersín s.r.o., Czech Republic, 2. VŠB-TU Ostrava, FMT, Czech Republic, 3. SINTEF Industry, Norway, 4. ICPF CAS, v. v. i., Prague, Czech Republic)

Sergio Armada¹, *Szymon Bernat¹, Emil Valaker¹, Francesca Di Bartolomeo¹, Susan Maleki¹, Cristina Iordan², Ann-Karin Kvernbråten¹, Petr Stavárek³, Marek Večeř⁴, Ladislav Zelenka⁵ (1. SINTEF Industry, Norway, 2. SINTEF Ocean, Norway, 3. ICPF CAS, v. v. i., Prague, Czech Republic, 4. VŠB-TU Ostrava, FMT, Czech Republic, 5. Biona Jersín s. r. o., Jersín, Czech Republic)