Events

A. Material & Construction » 3D printing

The 46th JCI Technical Conference

3D printingⅠ

Wed. Jun 26, 2024 10:00 AM - 12:00 PM Room 1 (小展示室A)

座長:大野元寛(土木),親本俊憲(建築)

+Add all to schedule

[1331] Evaluation of bending failure behavior of 3D printed mortar with different print paths using acoustic emission

Kota NAKASE¹, Katsufumi Hashimoto¹, Takafumi Sugiyama¹, Hiroto Oomori² (1.北海道大学 2.太平洋セメント)

[1332] Fundamental Study of Mechanical Properties of Reinforcing Bars Assuming Continuous Structure of Hook Joints

Yuichi HIRANO¹, Shu Yamazaki¹, Taketo Komai¹, Takashi Yamamoto¹ (1.京都大学)

[1333] EVALUATION OF MECHANICAL PROPERTIES AND DURABILITY OF 3D PRINTED ELEMENT EXPOSED TO OUTDOOR CONDITIONS

Hiroyuki ABE¹, Hiroki OGURA¹, Shinya YAMAMOTO¹, Ryu KIKUCHI¹ (1.清水建設)

[1334] Fundamental Study on Builability Evaluation of 3D Printing Mortar Based on Finite Element Method

Shunsei TANAKA¹, Kohei Yoshida¹, Yujin Yamamoto¹, Koji Kinomura¹ (1.大成建設)

[1335] Application of Precast Blocks Manufactured by Construction 3D Printer to Large Civil Engineering Structure

Yuto KITAMURA¹, Yoshikazu ISHIZEKI¹, Hiroshi FUJIMURA¹, Katsuya HAMACHI¹ (1.大林組)

[1336] Reinforcing method for concrete 3D printed laminates by combining fiber-reinforced cement composites and reinforcement insertion

Noriyuki KOBAYASHI¹, Tomoya Asakawa¹, Ryo Egawa¹, Tomoya Nisiwaki¹ (1.東北大学)

[1337] Consideration of evaluation method of self-supporting stability of 3D printed mortar by uniaxial compression test

HIROTO OOMORI¹, RYO KISHIRA¹, HIROAKI MORI¹ (1.太平洋セメント)

[1338] INTERLAYER BOND STRENGTH AND SCALING RESISTANCE OF 3D PRINTED LAMINATES WITH CO₂ABSORPTION MORTAR

Hibiki IKEDA¹, Daishin HANAOKA¹, Satoru KOBAYASHI² (1.金沢工業大学 2.鹿島建設)

The 46th JCI Technical Conference

3D printingⅡ

Wed. Jun 26, 2024 1:00 PM - 3:00 PM Room 1 (小展示室A)

座長:木ノ村幸士(土木),田中章夫(建築)

+Add all to schedule

[1339] Flexural failure behavior of 3D-printed reinforced concrete beams

Akira MIYAJIMA¹, Tatsuyoshi KATO¹, Shunya TOH¹, Minoru KUNIEDA¹ (1.岐阜大学)

[1340] Investigation of a method for evaluating the constructability of 3D printed mortars.

Aoi Mayumi¹, Yasushi Tanaka¹ (1.金沢工業大学)

[1341] Loading experiment of beam with outer frame constructed by 3D printing

NOZOMI KEMMOTSU¹, SATOMI MATSUDA¹, YAEKO TAKEICHI¹, TAICHI AZUMA² (1.東日本旅客鉄道 2.會澤高圧コンクリート)

[1342] Basic Study on Mix Proportion of Mortar for Construction 3D Printing

Shuma MAEDA¹, Kohji TERANISHI¹ (1.名城大学)

[1343] Effects of Lamination Conditions on Interlayer Bond Strength and Durability of 3D Printed of Mortar Laminates

CHEN LI¹, KOUJI TERANISHI¹, QIBIN CONG¹, HIDEYUKI KAJITA² (1.名城大学 2.前田建設工業)

[1344] Structural performance evaluation of unreinforced mortar benches fabricated by a construction 3D printer

Kento Murakami¹, Aoi Mayumi¹, Yasushi Tanaka¹ (1.金沢工業大学)

[1345] Development of simple desktop concrete 3D printer simulating actual printers and evaluation of its laminate specimens

Haruto TASAKI¹, Tomoya ASAKAWA¹, Tomoya NISHIWAKI¹, Kazunori OHNO¹ (1.東北大学)

×

Authentication

Abstract password authentication.
Password is required to view the abstract. Please enter a password to authenticate.

×

Please log in with your participant account.
» Participant Log In