杭基礎④

Tue. Jul 21, 2020 3:10 PM - 4:40 PM Room No. 9

+Add all to schedule

[21-9-4-01] Examples of vertical loading test of press-in pile.

*Koichi Okada¹, Yukihiro Ishihara¹ (1. GIKEN Ltd.)

[21-9-4-02] Vertical loading test of high standard micro-piles method in gravel layer

*Kasuya Yuki¹, Takahashi Shinichi¹ (1. Obayashi Corporation)

[21-9-4-03] A Proposal of Calculation Method of Axial Force and Section Settlement from Measured Strain in Load Test of Pile

*Hitoshi OGURA¹ (1. JAPAN　PILE　CORPORATION)

[21-9-4-04] Conception of Load Planing in Rapid Load Test with Soft Cushion-Weight Drop Method

*Shuichi Kamei¹, Kobayashi Go¹, Takano Kousaku¹, Yamashita Hisao¹ (1. Jibanshikenjo Co., Ltd.)

[21-9-4-05] Towards the revision of method for Rapid Load Test of Single Piles

*Kazunori Inazumi¹, Shinji Nishimura², Koji Watanabe³, Yoshiaki Kikuchi⁴ (1. Obayshi Corporation, 2. Seeds Engineering Inc., 3. Aichi Institute of Technology, 4. Tokyo University of Science)

[21-9-4-06] Influence of quantity of acceleration on accuracy of unloading point method for rapid pile load test

*Shinji Nishimura¹ (1. SEEDS ENGINEERING)

[21-9-4-07] Concept of loading method in Standards of Axial Static Load Test for Single piles

*Hidetoshi Nishioka¹, Shuichi KAMEI², Naoki FUJIWARA³, Yoshiaki Kikuchi⁴ (1. Chuo University, 2. Jibanshikenjo, 3. Taisei Corporation, 4. Tokyo University of Science)

[21-9-4-08] Proposed rule on pile spacing in Standards of Axial Static Load Test for Single Piles

*Yoshiaki Kikuchi¹, Shinpei Koume², Hitoshi Ogura², Akihito Nakasato³ (1. Tokyo University of Science, 2. Japan Pile, 3. System Measure)

Session information