一般講演

7.Biomedical and Health Care » Biomaterials Development and Clinics

[G] Biomaterials Development and Clinics

Fri. Sep 18, 2020 1:00 PM - 4:40 PM Rm. L (ZoomRm.L)

Chair: Sub Chairman (assistant):

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と村上記念賞受賞講演は5～10分）

+Add all to schedule

1:00 PM - 1:15 PM

[216] Characterization of Initial Calcium Phosphate Formation on Ti and TiO₂

*Akari HIJI¹, Masaya SHIMABUKURO², Peng CHEN³, Maki ASHIDA³, Takao HANAWA³ (1. Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental Univ., 2. Faculty of Dental Science, Kyushu Univ., 3. Inst. of Biomaterials and Bioengineering, Tokyo Medical and Dental Univ.)

1:15 PM - 1:30 PM

[217] Biofilm Formation Behaviors And Changes of Various Polymeric Materials/Bacteria

*Hideyuki KANEMATSU¹, Risa KAWAI¹, Kimi KUROTOBI¹, Hajime IKEGAI¹ (1. NIT, Suzuka College)

1:30 PM - 1:45 PM

[218] Cell behavior of water insoluble anticancer agent containing core/shell particles

*Sungho Lee¹, Tatsuya Miyajima¹, Ayae Sugawara-Narutaki², Katsuya Kato¹, Fukue Nakata¹ (1. AIST, 2. Nagoya University)

1:45 PM - 2:00 PM

[219] Regulation of balance in proliferation and calcification of MC3T3-E1 on Ti with nano-topographical patterned surface fabricated by femtosecond laser

*Peng CHEN¹, Naoki SHINOHARA², Togo SHINONAGA³, Yuji SATO⁴, Masahiro TSUKAMOTO⁴, Maki ASHIDA¹, Takao HANAWA¹ (1. TMDU, 2. Graduate School, Osaka Univ., 3. Okayama Univ., 4. Osaka Univ.)

break (2:00 PM - 2:20 PM)

2:20 PM - 2:35 PM

[220] Automatic Design for Beta Titanium Bone Plate by Locally Controlling Crystallographic Orientation

*Shigeyuki Sakaki¹, Satoshi Hasebe¹, Takuya Ishimoto², Takayoshi Nakano² (1. Fuji Xerox, 2. Osaka Univ.)

2:35 PM - 2:50 PM

[221] Thermal Diffusion Simulation for Controlling Crystallographic Texture by Laser Additive Manufacturing

*Ryoya SUGANUMA¹, Takuya ISHIMOTO², Yoichi TAKAGISHI³, Tatsuya YAMAUE³, Takayoshi NAKANO² (1. Osaka Univ., 2. Osaka Univ., 3. Kobelco Research Institute Inc.)

2:50 PM - 3:05 PM

[222] Comparative study of Ti matrix composites fabricated by laser powder bed fusion and spark plasma sintering

*Mingqi DONG¹, Weiwei ZHOU², Naoyuki NOMURA² (1. 東北大工（院生）、2. 東北大工)

3:05 PM - 3:20 PM

[223] Microstructure and Densification Behavior of Gas Atomized and Water Atomized Powders of CoCrMo Alloys Produced by Laser Powder Bed Fusion

*Rindang Fajarin¹, Weiwei Zhou¹, Naoyuki Nomura¹ (1. Tohoku University)

break (3:20 PM - 3:40 PM)

3:40 PM - 3:55 PM

[224] Control of Material Properties of Stainless Steels through Additive Manufacturing

*Yukinobu ITO¹, Takuya ISHIMOTO², Yusuke TSUTSUMI³, Takao HANAWA⁴, Shi-hai SUN², Takayoshi NAKANO² (1. Osaka Univ., 2. Osaka Univ., 3. National Inst. of Materials Science, 4. Tokyo Medical and Dental Univ.)

3:55 PM - 4:10 PM

[225] Fabrication of Ni-base superalloy by metal selective laser malting

*Tsubasa TODO¹, Takuya ISHIMOTO², Kota KIMURA², Ozkan Gokcekaya², Shinya HIBINO³, Kazushige FUJIMITSU³, Makoto AZUMA³, Kenichroh IGASHIRA³, Takayoshi NAKANO² (1. Osaka Univ., 2. Osaka Univ., 3. KHI)

4:10 PM - 4:25 PM

[226] Fabrication of BioHEA and formation of bimodal texture by selective laser melting

*Kana NAKANO¹, Ryosuke OZASA², Takuya ISHIMOTO², Aira MATSUGAKI², Takeshi NAGASE², Mitsuharu TODAI³, Takayoshi NAKANO² (1. Osaka University, Graduate School of Engineering, 2. Osaka University, Graduate School of Engineering, 3. National Institute of Technology, Niihama College)

4:25 PM - 4:40 PM

[227] Effect of Cr content on the powder characteristics and mechanical properties of Cu-Cr-Zr alloy for laser powder bed fusion

*Genta YUKI¹, Weiwei ZHOU², Naoyuki NOMURA² (1. Tohoku University (M2), 2. Tohoku University)

Session information