一般講演

8.Structural Materials » Light Metals

[G] Mg-Mg alloy

Thu. Sep 16, 2021 1:10 PM - 5:30 PM Rm. N (ZoomRm.N)

座長:峯田才寛(弘前大学)、佐々木泰祐(国立研究開発法人　物質・材料研究機構)、塚田祐貴(名古屋大学)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

1:10 PM - 1:25 PM

[331] Effects of Ce addition on second order pyramidal slip of magnesium single crystals

*Masashi SAKAMOTO¹, Masayuki TSUSHIDA², Hiromoto KITAHARA³, Shinji ANDO³ (1. Kumamoto Univ., 2. Kumamoto Univ. / Technical Division, 3. Kumamoto Univ. / MRC)

1:25 PM - 1:40 PM

[332] Room temperature formability of dilute Mg-Zn-Ca alloy sheets and their determining factors

*Yusuke MATSUOKA^1,3, Xinsheng HUANG³, Mingzhe BIAN³, Yuhki TSUKADA², Toshiyuki KOYAMA², Yasumasa CHINO³ (1. Nagoya Univ. Graduate School of Engineering(Doctor), 2. Nagoya Univ. Graduate School of Engineering, 3. National Institute of Advanced Industrial Science and Technology)

1:40 PM - 1:55 PM

[333] Fatigue fracture behavior of Mg-Ce single crystals in bending fatigue test

*Shinji ANDO¹, Kensuke MIYAZAKI², Guojun LU², Hiromoto KITAHARA¹ (1. Kumamoto Univ./MRC, 2. Kumamoto Unvi./GSST)

1:55 PM - 2:10 PM

[334] Characterization of microscopic deformation behavior of polycrystalline Mg-1.3Y alloy

*SUN Binxuan¹, PARK Myeong-heom², TSUJI Nobuhiro^2,3 (1. Kyoto University(Graduate student), 2. Kyoto University, 3. ESISM)

2:10 PM - 2:25 PM

[335] Statistical analysis of deformation mechanism in Mg Alloys by AE

*Kentaro Okade¹, Briffod Fabien¹, Takayuki Shiraiwa¹, Manabu Enoki¹ (1. The university of Tokyo)

break (2:25 PM - 2:35 PM)

2:35 PM - 2:50 PM

[336] Deformation mechanisms of AZ31 alloy at cryogenic temperature investigated by in-situ neutron diffraction

*Wu GONG¹, Stefanus HARJO¹, Tsuyoshi MAYAMA², Takuro KAWASAKI¹, Kazuya AIZAWA¹, Bingxuan SUN³, Nobuhiro TSUJI³ (1. JAEA, 2. Kumamoto Univ., 3. Kyoto Univ.)

2:50 PM - 3:05 PM

[337] High-temperature deformation behavior and Suzuki segregation observed in Mg-Gd-Zn-Zr alloys

*Masanori URAKTA¹, Katsuhiko SATO², Kaichi SAITO², Mitsuhiko KIMURA³, Hiromi ISHIDA³ (1. Akita Univ.(M2), 2. Akita Univ., 3. Akita Industrial Technology Center)

3:05 PM - 3:20 PM

[338] Effect of Twin in Creep rate of AZ31 alloy

*Ryusuke Suzumura¹, Akihiro Konya², Takahiro Mineta¹, Hiroyuki Sato¹ (1. Grad. School of Science and Technology Hirosaki Univ, 2. Grad. School of Science and Technology Hirosaki Univ. (Present:Japan Aviation Electronics Industry, Limited.))

3:20 PM - 3:35 PM

[339] Effect of heat treatment on creep behavior of LAZ941 alloy

*Haruto Saijo¹, Takahiro Mineta¹, Hiroyuki Sato¹ (1. Grad. School of Science and Technology Hirosaki Univ.)

3:35 PM - 3:50 PM

[340] Effect of Be addition on high temperature oxidation and incombustibility of Mg-Al-X alloys

*Shinichi Inoue¹, Ryosuke Omoto², Michiaki Yamasaki¹, Yoshihito Kawamura¹ (1. 熊本大MRC、2. 熊本大（院）)

break (3:50 PM - 4:00 PM)

4:00 PM - 4:15 PM

[341] Strain induced precipitation of G.P. zones in binary magnesium alloys

*Taisuke SASAKI^1,2, Jhe-Yu LIN¹, Suhas Eswarappa　Prameera³, Timothy WEIHS³, Kazuhiro HONO¹ (1. NIMS, 2. ESISM, Kyoto Univ., 3. Johns Hopkins Univ.)

4:15 PM - 4:30 PM

[342] Origin of the rapid age hardening and formation of the G.P. zones in Mg-Ca-Zn base alloys

*Zehao LI¹, Taisuke Sasaki^1,2, Akira Uedono³, Kazuhiro Hono¹ (1. NIMS, 2. ESISM, Kyoto Univ., 3. Univ. of Tsukuba)

4:30 PM - 4:45 PM

[343] Stacking arrangement of L1₂ cluster-planes based on layer-pair-interactions in Mg alloy

*Taku Murakami¹, Nobuhisa Fujima², Toshiharu Hoshino², Mitsuhiro Takeda³, Kazuya Konno³ (1. Shizuoka Univ., 2. Shizuoka Univ., 3. Sendai Callege)

4:45 PM - 5:00 PM

[344] Improving tensile properties and interfacial bond strength of explosive-welded AZX611/A6005C clad sheet by conventional hot-rolling

*Mingzhe BIAN¹, Xinsheng HUANG¹, Naobumi SAITO¹, Isao NAKATSUGAWA¹, Yasumasa CHINO¹ (1. AIST)

5:00 PM - 5:15 PM

[345] Joining of Metal Sheets Containing Resin and Ceramic to Magnesium Alloy Using Shot Peening

Yusaku Nakashima¹, *Yasunori Harada¹ (1. Univ. of Hyogo)

5:15 PM - 5:30 PM

[346] Improving joint strength of self-piercing riveted Mg–xAg–0.1Ca/A5052 joints by Ag content optimization

*Mingzhe BIAN¹, Xinsheng HUANG¹, Yasumasa CHINO¹ (1. AIST)

Session information