一般講演

8.Structural Materials » Light Metals

[G] Aluminum and Its Alloys

Wed. Sep 20, 2023 2:00 PM - 5:15 PM Rm. Q (2nd Flr.,School of Humanities Bldg.)

Chair:Daisuke Egusa

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

2:00 PM - 2:15 PM

[403] Kink deformed microstructure in layered Al-Cu eutectic alloy

*Daisuke EGUSA¹, Koji HAGIHARA², Tuyoshhi MAYAMA³, Eiji ABE^1,4 (1. University of Tokyo, 2. Nagoya Institute of Technology, 3. Kumamoto University, 4. NIMS)

2:15 PM - 2:30 PM

[404] Investigation of Formation of Dislocation Cell in Aluminum Using Image Analysis

*Yosuke NAKASHIMA¹, Ryota ITO¹, Norifumi KUBO¹, Kouki NISHIDATE¹, Ken TAKATA², Shigeo ARAI³, Kenichi IKEDA⁴, Toshio OGAWA⁵ (1. Daido Univ. School of Engineering(Master), 2. Daido Univ. School of Engineering, 3. Nagoya Univ., 4. Hokkaido Univ., 5. Aichi Institute of Technology Univ.)

2:30 PM - 2:45 PM

[405] Effect of deformation temperature on flow stress and dynamical metallurgical phenomena of Al–Zn–Mg alloy under thermomechanical treatment

*Hyung-Won PARK¹, Hyeon-Woo PARK², Yuki SHIMOMURA², Yun-Soo LEE³, Tomohiro HATA⁴, Jun YANAGIMOTO² (1. Komatsu Univ., 2. The Univ. of Tokyo, 3. Korea Institute of Materials Science, 4. Komatsu Univ. (Present: Ishikawa Malleable Co., LTD.))

2:45 PM - 3:00 PM

[406] Effect of thermomechanical treatment on aging precipitation of Al-Cu-Mg alloy

*Hiroki Saito¹, Hai　Ngoc Vu¹, Seungwon Lee¹, Taiki tsuchiya¹, Kenji Matsuda¹, Susumu Ikeno² (1. Toyama University, 2. Professor of emeritus Toyama University)

3:00 PM - 3:15 PM

[407] Improvement of formability of silicon-containing recycled wrought aluminium alloy by hot stamping after rapid heating

*Ryohei Kawana¹, Shoichi Hirosawa¹, Mitsuhiro Ootaki¹, Tomoyoshi Maeno¹, Yuji Yabuki², Yasushi Suzuki² (1. Yokohama National Univ., 2. G-tekt Corporation)

3:15 PM - 3:30 PM

[408] Influence of Ti and V on the high-temperature strength of Al-Cu alloy

*JINSHIAN HUANG¹, DAISUKE ANDO¹, YUJI SUTOU^1,2 (1. Tohoku Univ. (Eng), 2. Tohoku Univ. (AIMR))

break (3:30 PM - 3:45 PM)

3:45 PM - 4:00 PM

[409] Analysis of Al-Zn-Mg composite materials by combined SAXS tomography and high-angle diffraction

*Tomoki MIYABE¹, Shan Lin¹, Hiroshi Okuda¹, Kyosuke Hirayama¹, Hiroyasu Masunaga², Taizo Kabe² (1. Kyoto Univ., 2. JASRI)

4:00 PM - 4:15 PM

[410] Effect of sintering process on microstructure and strength of
titanium particle reinforced Al-Li alloy-based composites

*Shuma ANZAWA¹, Haruto Watanabe¹, Naritoshi Aoyagi¹ (1. National Institute of Technology, Nagaoka College)

4:15 PM - 4:30 PM

[411] Effect of Surface Properties on Zincate Treatment of A5052 and
Evaluation of Liquid Phase Diffusion Bonding

*Ryohei ISHIKURA¹, Tomoyuki TAKAHASHI², Shinji KOYAMA³ (1. Gunma Univ., 2. Gunma Univ. (Present: SMC Corporation), 3. Gunma Univ.)

4:30 PM - 4:45 PM

[412] Solid Phase Bonding of A5052/C1020 by Electrically Assisted Bonding Technique

*Kota NAKAI¹, Shinji KOYAMA¹, Masanori UENO², Masami MOTEGI² (1. Gunma Univ., 2. Sanken electric Co., LTD.)

4:45 PM - 5:00 PM

[413] Liquid Phase Diffusion Bonding of A5052 With Citrate Coated Zn Sheet

*NGUYEN　QUANG HUY¹, Shinji KOYAMA¹ (1. Gunma Univ.)

5:00 PM - 5:15 PM

[414] In-situ observation of the effect of additive Mg on the destruction of oxide film in

*Weirui WANG¹, Takumi ICHIKAWA², Yusaku SEIMIYA³, Hiroshi SUGA², Shumpei OZAWA² (1. Chiba Inst. Tech.（M）, 2. Chiba Inst. Tech., 3. Chiba Inst. Tech.（D）)

Session information