[G] Nuclear Materials

Fri. Sep 22, 2023 1:25 PM - 2:55 PM Rm. L (3rd Flr. Education and Research Building, School of Engineering)

Chair:(Hokkaido University)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

1:25 PM - 1:40 PM

[335] Effect of Cr and Si on the High-temperature Oxidation Behaviors of Reduced-activation Oxide Dispersion-strengthened High-Mn Alumina Forming Austenite steels

*Diancheng Geng^1,2, Hao Yu², Sosuke Kondo², Junichi Miyazawa³, Ryuta Kasada² (1. Graduate School of Engineering, Tohoku University、2. IMR, Tohoku University、3. Helical Fusion)

1:40 PM - 1:55 PM

[336] Evaluation of Shear Strength of Protective Alumina Film on FeCrAl Alloy for Lead-Lithium Liquid Blanket Piping in Fusion Reactor

*Naoko OONO¹, Angela　Dannea Anak　Andria², Xiangyu Wu⁴, Hao Yu³, Ryuta Kasada³ (1. Yokohama National Univ., 2. Yokohama National Univ. (Undergrad.), 3. IMR, Tohoku Univ., 4. IMR, Tohoku Univ. (Grad. Std.))

1:55 PM - 2:10 PM

[337] Improving mechanical properties in diffusion bonded joints between reduced activation Cr_0.8FeMnNi MEA and 316 stainless steel by adding Ni interlayer

*Haotian SUN¹, Naoyuki Hashimoto², Hiroshi Oka², Shigehito Isobe² (1. Graduate School of Engineering, Hokkaido Univ., 2. Faculty of Engineering, Hokkaido Univ.)

2:10 PM - 2:25 PM

[338] Fabrication of W-1.1%TiC with helium bubbles via powder metallurgical route incorporated with helium ambient mechanical alloying

*Tatsuaki SAKAMOTO¹, Kenta YOSHIDA², Shunsuke MAKIMURA³, Hiroyuki NOTO⁴, Eiichi WAKAI⁵, Hiroaki KURISHITA³, Masahiro NAGAE⁶ (1. Graduate School of Ehime Univ., 2. Institute of Material Research of Tohoku Univ., 3. High Energy Accelerator Research Organization, 4. National Institute for Fusion Science, 5. Japan Atomic Energy Agency, 6. Research Institute for Applied Science)

2:25 PM - 2:40 PM

[339] Zr effect on aging behavior of hardness and microstructure of Cu-Cr alloy

*Takeshi TOYAMA¹, J Hughes², Koh Kurano¹, Koji Inoue¹, Yasuyoshi Nagai¹, M Gorley³, E Jimenez-Melero² (1. Tohoku Univ., 2. Univ. of Manchester, 3. UK Atomic Energy Authority)

2:40 PM - 2:55 PM

[340] Thermal stability of arc-melted or additively-manufactured Cr_0.8FeMn_1.3Ni_1.3 alloy

*Tian LIU¹, Naoyuki Hashimoto², Hiroshi Oka², Shigehito Isobe² (1. Graduate School of Engineering, Hokkaido UniversityGraduate School of Engineering, Hokkaido UniversityGraduate School of Engineering, Hokkaido University, 2. Faculty of Engineering, Hokkaido University)

Session information

[G] Nuclear Materials

[335] Effect of Cr and Si on the High-temperature Oxidation Behaviors of Reduced-activation Oxide Dispersion-strengthened High-Mn Alumina Forming Austenite steels

[336] Evaluation of Shear Strength of Protective Alumina Film on FeCrAl Alloy for Lead-Lithium Liquid Blanket Piping in Fusion Reactor

[337] Improving mechanical properties in diffusion bonded joints between reduced activation Cr_0.8FeMnNi MEA and 316 stainless steel by adding Ni interlayer

[338] Fabrication of W-1.1%TiC with helium bubbles via powder metallurgical route incorporated with helium ambient mechanical alloying

[339] Zr effect on aging behavior of hardness and microstructure of Cu-Cr alloy

[340] Thermal stability of arc-melted or additively-manufactured Cr_0.8FeMn_1.3Ni_1.3 alloy

Authentication

Session information

[G] Nuclear Materials

[335] Effect of Cr and Si on the High-temperature Oxidation Behaviors of Reduced-activation Oxide Dispersion-strengthened High-Mn Alumina Forming Austenite steels

[336] Evaluation of Shear Strength of Protective Alumina Film on FeCrAl Alloy for Lead-Lithium Liquid Blanket Piping in Fusion Reactor

[337] Improving mechanical properties in diffusion bonded joints between reduced activation Cr0.8FeMnNi MEA and 316 stainless steel by adding Ni interlayer

[338] Fabrication of W-1.1%TiC with helium bubbles via powder metallurgical route incorporated with helium ambient mechanical alloying

[339] Zr effect on aging behavior of hardness and microstructure of Cu-Cr alloy

[340] Thermal stability of arc-melted or additively-manufactured Cr0.8FeMn1.3Ni1.3 alloy

Authentication

[337] Improving mechanical properties in diffusion bonded joints between reduced activation Cr_0.8FeMnNi MEA and 316 stainless steel by adding Ni interlayer

[340] Thermal stability of arc-melted or additively-manufactured Cr_0.8FeMn_1.3Ni_1.3 alloy