ポスターセッション

[P] P88~P95

Tue. Sep 19, 2023 1:00 PM - 2:30 PM Hall, 1st Flr. at "TOYAMA Jiyukan " (Hall, 1st Flr. at "TOYAMA Jiyukan ")

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

1:00 PM - 2:30 PM

[P88] Mechanism of auditory function regulation by bioactive substance-mediated apatite orientation in auditory ossicles

*Kenji TANAKA¹, Syuma OHARA², Tadaaki MATSUZAKA², Aira MATSUGAKI², Takuya ISHIMOTO², Yukiko KURODA³, Koichi MATSUO³, Takayoshi NAKANO² (1. Osaka Univ. Grad. Eng., 2. Osaka Univ. Grad. Eng., 3. Keio Univ. Med.)

1:00 PM - 2:30 PM

[P89] Cell Orientation by Nanoporous Gold Actuator and Its Mechanism

*Kazuki YOKOTA¹, Peizheng WU¹, Masataka HAKAMADA¹, Mamoru MABUCHI¹ (1. Graduate School of Energy Science, Kyoto University)

1:00 PM - 2:30 PM

[P90] Segregation suppression of β Ti-based alloy via super rapid cooling using laser powder bed fusion (L-PBF) and mechanical property

*Shohei HORIO¹, Ryosuke OZASA^1,2, Kazuhisa SATO³, Masayuki OKUGAWA^1,2, Yuichiro KOIZUMI^1,2, Takayoshi NAKANO^1,2 (1. Osaka Univ. Grad. Eng., 2. Osaka Univ. AM Center, 3. Osaka Univ. UHVEM)

1:00 PM - 2:30 PM

[P91] Formation of Crystallographic Texture and Mechanical Properties of Co-Based Alloys Fabricated by Laser Powder Bed Fusion

*Kohei ASAKURA¹, Takuya ISHIMOTO^1,2, Ryosuke OZASA¹, Kazuhisa SATO³, Shinya IMANO⁴, Kiyohito ISHIDA⁵, Takayoshi NAKANO¹ (1. Grad. School of Eng., Osaka Univ., 2. ARC, Univ. Toyama, 3. Research Center for UHVEM, Osaka Univ., 4. MHI, 5. Tohoku Univ.)

1:00 PM - 2:30 PM

[P92] Fabrication of mechanical properties of electrodeposited Zn-Fe alloys for biodegradable implants

*Ryosuke MIYAMOTO¹, Ryusei ARAUCHI², Hiroki KOTO³, Yorinobu Takigawa¹ (1. Osaka Metropolitan Univ., 2. Osaka Prefecture Univ. (Present: Kobe Steel, Ltd.), 3. Osaka Prefecture Univ. (Present: DAIHATSU MOTOR CO., LTD.))

1:00 PM - 2:30 PM

[P93] Development of Biomedical Ti-based Alloys with Low Young's Modulus and High Strength via
Solid Solution Strengthening

*Yusuke NOMURA¹, Tomoyo MANAKA², Takuya ISHIMOTO² (1. Univ. Toyama, 2. Aluminium Research Center, Univ. Toyama)

1:00 PM - 2:30 PM

[P94] Microstructure and mechanical properties of aging-treated Ti-Cr-Sn shape memory alloys

*Keiko Widyanisa¹, Naoki Nohira¹, Wan-Ting Chiu¹, Akira Umise¹, Masaki Tahara¹, Hideki Hosoda¹ (1. IIR, Tokyo Tech)

1:00 PM - 2:30 PM

[P95] Effect of substrate surface morphology on visible light reflection of CP Ti high temperature oxide layer

*Rikuto Ohkita¹, Miura Eri² (1. Graduate Student School of Engineering University of Hyogo, 2. Graduate School of Engineering University of Hyogo)

ポスターセッション

[P] P228~P234

Tue. Sep 19, 2023 3:00 PM - 4:30 PM Hall, 1st Flr. at "TOYAMA Jiyukan " (Hall, 1st Flr. at "TOYAMA Jiyukan ")

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

3:00 PM - 4:30 PM

[P228] Design of a novel titanium intervertebral device for guiding bone matrix orientation

*Toko MORI¹, Airia MATSUGAKI¹, Masayuki BUN², Takashi KAITO², Seiji OKADA², Takayoshi NAKANO¹ (1. Osaka Univ. Grad Eng., 2. Osaka Univ. Grad Med.)

3:00 PM - 4:30 PM

[P229] Development of FCC-type high entropy alloy and analysis of hydrogen embrittlement resistance

*Masaki KITAKAMI¹, Ryosuke Ozasa^1,2, Takuya Ishimoto^1,2,3, Takayoshi Nakano^1,2 (1. Osaka Univ. Grad. Eng., 2. Osaka Univ. AM Center, 3. Univ. of Toyama ARC)

3:00 PM - 4:30 PM

[P230] Understanding of Hydrogen Embrittlement Characteristic by Controlling Crystallographic Orientation of Ni-based alloy Using Laser Powder Bed Fusion

*Tatsuya NITOMAKIDA¹, Ozkan Gokcekaya^1,2, Ryosuke Ozasa^1,2, Takayoshi Nakano^1,2 (1. Osaka Univ., Grad. Eng., 2. Osaka Univ. AM Center)

3:00 PM - 4:30 PM

[P231] Effect of Grain Size on Low-temperature Heat Treatability of Co-Cr-W-Ni Alloy for Stent Applications

*Tomoki Nakajima¹, Kyosuke Ueda², Takayuki Narushima² (1. Graduate School of Engineering, Tohoku Univ. (M1), 2. Graduate School of Engineering, Tohoku Univ.)

3:00 PM - 4:30 PM

[P232] Mechanical Properties and Microstructure Observation of Biomedical Au-Cu-Al Shape Memory Alloys by Introducing Casting Process.

*Yecheng Li¹, Nohira Naoki², Chiu Wan-Ting², Umise Akira^2,3, Tahara Masaki², Sone Masato², Hosoda Hideki² (1. Tokyo Tech (Graduate student), 2. IIR, Tokyo Tech, 3. IBB, TMDU)

3:00 PM - 4:30 PM

[P233] Evaluation of single tracks fabricated by powder bed fusion
using β-type Ti-Nb-Ta-Zr alloy powder

*Shinya TAKEDA¹, Masaaki NAKAI², Kousuke UEKI², Hideki KYOGOKU³ (1. Kindai Univ. (student), 2. Kindai Univ., 3. Kindai Univ.)

3:00 PM - 4:30 PM

[P234] Phase stabilities and deformation behavior of (Hf, Zr, Ti)-Nb-Sn alloys

*Ryuto HIRATA¹, Kenta NAKANO¹, Yuki AKIYAMA¹, Wataru TASAKI², Hee　Young KIM², Syuichi MIYAZAKI² (1. Tsukuba Univ., 2. Tsukuba Univ.)

Sessions

7.Biomedical and Health Care » Biomedical and Health Care

[P] P88~P95

[P88] Mechanism of auditory function regulation by bioactive substance-mediated apatite orientation in auditory ossicles

[P89] Cell Orientation by Nanoporous Gold Actuator and Its Mechanism

[P90] Segregation suppression of β Ti-based alloy via super rapid cooling using laser powder bed fusion (L-PBF) and mechanical property

[P91] Formation of Crystallographic Texture and Mechanical Properties of Co-Based Alloys Fabricated by Laser Powder Bed Fusion

[P92] Fabrication of mechanical properties of electrodeposited Zn-Fe alloys for biodegradable implants

[P93] Development of Biomedical Ti-based Alloys with Low Young's Modulus and High Strength via
Solid Solution Strengthening

[P94] Microstructure and mechanical properties of aging-treated Ti-Cr-Sn shape memory alloys

[P95] Effect of substrate surface morphology on visible light reflection of CP Ti high temperature oxide layer

[P] P228~P234

[P228] Design of a novel titanium intervertebral device for guiding bone matrix orientation

[P229] Development of FCC-type high entropy alloy and analysis of hydrogen embrittlement resistance

[P230] Understanding of Hydrogen Embrittlement Characteristic by Controlling Crystallographic Orientation of Ni-based alloy Using Laser Powder Bed Fusion

[P231] Effect of Grain Size on Low-temperature Heat Treatability of Co-Cr-W-Ni Alloy for Stent Applications

[P232] Mechanical Properties and Microstructure Observation of Biomedical Au-Cu-Al Shape Memory Alloys by Introducing Casting Process.

[P233] Evaluation of single tracks fabricated by powder bed fusion
using β-type Ti-Nb-Ta-Zr alloy powder

[P234] Phase stabilities and deformation behavior of (Hf, Zr, Ti)-Nb-Sn alloys

Authentication