一般講演

[G] Mechanical Properties and Microstructure

Thu. Mar 9, 2023 9:00 AM - 12:00 PM Rm. D (Rm.1101,1st Flr.,Buld.No.11)

Chair:Nozomu Adachi

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

9:00 AM - 9:30 AM

[72] Alloy design and microstructural control using manufacturing processes

*Naoki TAKATA¹ (1. Nagoya university)

9:30 AM - 9:45 AM

[73] Microstructure stability of additive manufactured Al-Fe-Mn alloy at elevated temperatures

*Wenyuan WANG¹, Naoki Takata¹, Asuka Suzuki¹, Makoto Kobashi¹, Masaki Kato², Yifan Xu³, Misaki Deguchi³, Masatoshi Mitsuhara³, Hideharu Nakashima³ (1. Nagoya Univ., 2. Aichi Center for Industry and Science Technology, 3. Kyushu Univ.)

9:45 AM - 10:00 AM

[74] Crystal growth control of E2₁ type intermetallic compounds and evaluation for their mechanical properties using micro-size specimens

*Daiki HAGINIWA¹, Soichiro SHIMA, jiang Yiming¹, Manabu WATANABE¹, Chang Mark¹, Masato SONE¹, Yoshisato KIMURA¹ (1. Tokyo Institute of Technology)

10:00 AM - 10:15 AM

[75] Strain localization during kink formation in Mg-Zn-Y alloy with LPSO phase

*Yu SHEN¹, Briffod Fabien¹, Takayuki Shiraiwa¹, Manabu Enoki¹ (1. University of Tokyo)

10:15 AM - 10:30 AM

[76] Deformed microstructure in LPSO-type magnesium alloys exhibiting PLC effect

*Naoki AMEMIYA¹, Daisuke EGUSA¹, Tomotaka MIYAZAWA², Toshiyuki FUJII², Eiji ABE^1,3 (1. The University of Tokyo, 2. Tokyo Institute of Technology, 3. NIMS)

break （10:30 AM - 10:45 AM）

10:45 AM - 11:00 AM

[77] Mathematical description and prediction of the arrangement of three-dimensional structural units for asymmetrical tilt grain boundaries

*Kazutoshi INOUE^1,2, Kazuaki KAWAHARA³, Mitsuhiro SAITO³, Motoko KOTANI¹, Yuichi IKUHARA^1,3,4 (1. AIMR, Tohoku Univ., 2. JST, 3. Inst. Eng. Innov., the Univ. Tokyo, 4. JFCC)

11:00 AM - 11:15 AM

[78] Large Elastic Deformation in A Bulk Cu-Al-Mn Alloy with Heusler Structure

*Sheng XU¹, Takumi Odaira¹, Shunsuke Sato¹, Xiao Xu¹, Toshihiro Omori¹, Stefanus Harjo², Takuro Kawasaki², Seiner Hanuš³, Zoubková Kristýna⁴, Yasukazu Murakami⁵, Ryosuke Kainuma¹ (1. Graduate School of Engineering, Tohoku Univ., 2. JAEA, 3. Czech Academy of Sciences, 4. Czech Technical University in Prague, 5. Kyushu University)

11:15 AM - 11:30 AM

[79] Effect of CNF Addition on Shear Strength of Sn-Ag-Cu Solder Alloys

*Tasuku ISEZAKI¹, Tetsuo AIDA¹, Akira OKUMA², Hiroyuki TANAKA³ (1. Toyama Univ., 2. MATSUO HANDA CO.,LTD., 3. Chuetsu Pulp & Paper CO.,LTD.)

11:30 AM - 11:45 AM

[80] Improvement of plating properties of steel plate by application of ultrasonic

*MANOVA　RAJA　SINGH SELVARAJ¹, Choi Yong　bum¹, Koshiba Takuya¹, Hoshino Katsuya², Miyata Mai², Okumura Yusuke² (1. Hiroshima University、2. JFE Steel Corporation)

11:45 AM - 12:00 PM

[81] Application of High-Pressure Torsion to Amino Acids as Essential Molecules for Life

*Kaveh EDALATI¹, Ikuo TNIGUCH², Ricardo FLORIANO³, Augusto DUCATI　LUCHESSI^3,4 (1. WPI-I2CNER, Kyushu University, Fukuoka, Japan、2. Faculty of Fiber Science and Technology, Kyoto Institute of Technology, Kyoto, Japan、3. School of Applied Sciences, University of Campinas (UNICAMP), Limeira, São Paulo, Brazil、4. Institute of Biosciences, São Paulo State University (UNESP), Rio Claro, São Paulo, Brazil)

ポスターセッション

[P] P29~P37

Tue. Mar 7, 2023 2:30 PM - 4:00 PM South Exhibition Hall, 2nd Flr. ,"Hamamastucho-kan"

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

2:30 PM - 4:00 PM

[P29] Influence of porosity and kink boundaries on mechanical properties
in Ti₃SiC₂ MAX phase ceramics

*Eiichi Sei¹, Ken-ichi Ikeda², Seiji Miura², koji Morita³, Tohru S.　Suzuki³, Yoshio Sakka³ (1. 北大工(学生)、2. 北大工、3. 物材機構)

2:30 PM - 4:00 PM

[P30] Managing both high strength and thermal conductivity of additive-manufactured Al-Fe-Cu alloy

*Yue CHENG¹, Takanobu Miyawaki¹, Wenyuan Wang¹, Naoki Takata¹, Asuka Suzuki¹, Makoto Kobashi¹, Masaki Kato² (1. Nagoya Univ., 2. Aichi Center for Industry and Science Technology)

2:30 PM - 4:00 PM

[P31] Microstructure and hardness property of refractory metals added Ni₃(Si,Ti) intermetallic alloy coatings by laser metal deposition

*Masaaki MIYAMOTO¹, Takuto YAMAGUCHI², Keigo TANAKA², Satoshi SEMBOSHI³, Yasuyuki KANENO¹ (1. Osaka Prefecture Univ., 2. ORIST, 3. IMR of Tohoku Univ.)

2:30 PM - 4:00 PM

[P32] Influence of Grain Boundaries on Interaction between Dislocation Walls and Mobile Dislocations in Fatigue Phenomenon through Atomic Simulation

*Takuya Akiyama¹, Tomoaki Niiyama², Tomotsugu Shimokawa² (1. Graduate School of Kanazawa Univ., 2. Kanazawa Univ.)

2:30 PM - 4:00 PM

[P33] Deformation behavior and Hall-Petch Relationship of ultrafine grained Pure Mo and Pure Nb

*Mayu DONO¹, Si GAO², Shuhei YOSHIDA², Nobuhiro TSUJI² (1. Kyoto University（undergrad）, 2. Kyoto University)

2:30 PM - 4:00 PM

[P34] Effect of deformation temperature on strengthening mechanism in high-Mn steels

*Hirokazu Kato¹, Sukyoung Hwang², Myeong-Heom Park², Si Gao², Nobuhiro Tsuji² (1. 京都大工（院生）、2. 京都大工)

2:30 PM - 4:00 PM

[P35] Effect of molybdenum addition on mechanical properties in zirconium

*Hikaru JINGU¹, Takahiro WATANABE¹, Tatsuya NAKATSUJI¹, Naoko IKEO¹, Takao HANAWA^1,2, Toshiji MUKAI¹ (1. Kobe Univ., 2. Tokyo Medical and Dental Univ.)

2:30 PM - 4:00 PM

[P36] Investigation of edge-dislocation dipole annihilation distance by molecular dynamics simulation

*Keita TAKANO¹, Tomoya AOBA², Yelm OKUYAMA² (1. Nat. Inst. of Tech., Kisarazu College, 2. Nat. Inst. of Tech., Kisarazu College)

2:30 PM - 4:00 PM

[P37] Mechanism of ductility enhancement in cold-rolled tungsten under micro-bending test

*XIANGYU WU¹, Sosuke KONDO², Hao YU², Ryuta KASADA² (1. Engineering Dept., Tohoku Univ., 2. IMR, Tohoku Univ.)

ポスターセッション

[P] P102~P111

Tue. Mar 7, 2023 4:30 PM - 6:00 PM South Exhibition Hall, 2nd Flr. ,"Hamamastucho-kan"

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

4:30 PM - 6:00 PM

[P102] Anisotropic deformation and oxidization behavior of textured Ti₂AlC-MAX phase ceramics

*Jotaro MURAOKA¹, Ken-ichi IKEDA¹, Seiji MIURA¹, Koji MORITA², Tohru S.SUZUKI², Yoshio SAKKA² (1. Hokkaido Univ., 2. NIMS)

4:30 PM - 6:00 PM

[P103] Microstructure and mechanical properties of Ni-V-Ta-Al intermetallic alloys

*Yusuke OKUDA¹, Satoshi SEMBOSHI², Yasuyuki KANENO³ (1. 大阪公立大工（院生）、2. 東北大金研、3. 大阪公立大工)

4:30 PM - 6:00 PM

[P104] Effect of Hydrogen Environment Exposure on the Mechanical Strength in Simulated Fuel Debris

*Jiaxing REN^1,2, Huilong YANG^1,2, Kenta MURAKAMI^1,2, Hikroaki ABE^1,2 (1. The University of Tokyo, 2. School of engineering)

4:30 PM - 6:00 PM

[P105] Effects of Crystal Orientation and Stacking Fault Energy on Tensile Deformation Behavior and Deformation Microstructure Evolution in Cu Al Alloys

*Kentaro YAMAMOTO¹, Shuhei YOSHIDA¹, Nobuhiro TSUJI¹ (1. Kyoto University)

4:30 PM - 6:00 PM

[P106] Strength of harmonic structure materials by dislocation pile-up modeling

*Keito Kiyota¹, Tomoaki Niiyama², Tomotsugu Shimokawa² (1. Graduate School of Kanazawa Univ, 2. Kanazawa Univ)

4:30 PM - 6:00 PM

[P107] Effect of Low angle Grain Boundary on strength of Al-3mass%Mg by SPD

*Atushi KOZAKI¹, Taiki Morishige², Taiga Aizawa³, Tsutomu Tanaka⁴ (1. Kansai University(student), 2. Kansai University, 3. Kansai Univ. (Present: Kawasaki Heavy Industries, Ltd.）, 4. Osaka Research Institute of Industrial Science and Technology)

4:30 PM - 6:00 PM

[P108] The effects of mechanical twinning on the deformation behavior of a commercial purity titanium

*Hiroki IWANUMA¹, Taisuke NAKAMURA¹, Chihiro WATANABE¹, Norimitsu KOGA¹, Hiromi MIURA² (1. Kanazawa University, 2. Toyohashi University of techenical)

4:30 PM - 6:00 PM

[P109] Uniaxial tensile property in ω-Ti with deformation texture

*Haruki YOSHIDA¹, Nozomu ADACHI², SATOSHI MOROOKA³, Pingguang XU³, Stefanus HARJO³, Yoshikazu TODAKA² (1. Toyohashi University of Technology（student), 2. Toyohashi University of Technology, 3. Japan Atomic Energy Agency)

4:30 PM - 6:00 PM

[P110] Evaluation of concentration of hydrogen and hydrogen-related defects in iron under hydrogen-ion irradiation using TEM and point-defect equation

*Yushin KOYAKE¹, Sou TANAKA², Takahito INOUE¹, Yutaka SUGIMOTO³, Kazuto ARAKAWA⁴ (1. Shimane University, 2. Shimane University (present: JFE Galvanizing & Coating Co. Ltd.), 3. Shimane University (present: National Institute for Quantum Science and Technology), 4. Next generation Tatara Co-Creation Centre (NEXTA) Shimane University)

4:30 PM - 6:00 PM

[P111] Low temperature toughness and plastic deformation in Beta Titanium Alloy of Ti-22V-4Al

*Rei Yano¹, Tatsuya Morikawa², Shigeto Yamasaki², Masaki Tanaka² (1. Kyushu Univ., 2. Kyushu Univ.)

Sessions

4.Mechanical Properties » Mechanical Properties

[G] Mechanical Properties and Microstructure

[72] Alloy design and microstructural control using manufacturing processes

[73] Microstructure stability of additive manufactured Al-Fe-Mn alloy at elevated temperatures

[74] Crystal growth control of E2₁ type intermetallic compounds and evaluation for their mechanical properties using micro-size specimens

[75] Strain localization during kink formation in Mg-Zn-Y alloy with LPSO phase

[76] Deformed microstructure in LPSO-type magnesium alloys exhibiting PLC effect

[77] Mathematical description and prediction of the arrangement of three-dimensional structural units for asymmetrical tilt grain boundaries

[78] Large Elastic Deformation in A Bulk Cu-Al-Mn Alloy with Heusler Structure

[79] Effect of CNF Addition on Shear Strength of Sn-Ag-Cu Solder Alloys

[80] Improvement of plating properties of steel plate by application of ultrasonic

[81] Application of High-Pressure Torsion to Amino Acids as Essential Molecules for Life

[P] P29~P37

[P29] Influence of porosity and kink boundaries on mechanical properties
in Ti₃SiC₂ MAX phase ceramics

[P30] Managing both high strength and thermal conductivity of additive-manufactured Al-Fe-Cu alloy

[P31] Microstructure and hardness property of refractory metals added Ni₃(Si,Ti) intermetallic alloy coatings by laser metal deposition

[P32] Influence of Grain Boundaries on Interaction between Dislocation Walls and Mobile Dislocations in Fatigue Phenomenon through Atomic Simulation

[P33] Deformation behavior and Hall-Petch Relationship of ultrafine grained Pure Mo and Pure Nb

[P34] Effect of deformation temperature on strengthening mechanism in high-Mn steels

[P35] Effect of molybdenum addition on mechanical properties in zirconium

[P36] Investigation of edge-dislocation dipole annihilation distance by molecular dynamics simulation

[P37] Mechanism of ductility enhancement in cold-rolled tungsten under micro-bending test

[P] P102~P111

[P102] Anisotropic deformation and oxidization behavior of textured Ti₂AlC-MAX phase ceramics

[P103] Microstructure and mechanical properties of Ni-V-Ta-Al intermetallic alloys

[P104] Effect of Hydrogen Environment Exposure on the Mechanical Strength in Simulated Fuel Debris

[P105] Effects of Crystal Orientation and Stacking Fault Energy on Tensile Deformation Behavior and Deformation Microstructure Evolution in Cu Al Alloys

[P106] Strength of harmonic structure materials by dislocation pile-up modeling

[P107] Effect of Low angle Grain Boundary on strength of Al-3mass%Mg by SPD

[P108] The effects of mechanical twinning on the deformation behavior of a commercial purity titanium

[P109] Uniaxial tensile property in ω-Ti with deformation texture

[P110] Evaluation of concentration of hydrogen and hydrogen-related defects in iron under hydrogen-ion irradiation using TEM and point-defect equation

[P111] Low temperature toughness and plastic deformation in Beta Titanium Alloy of Ti-22V-4Al

Authentication