一般講演

[G] High Temperature Oxidation and Corrosion (1)

Wed. Mar 8, 2023 1:30 PM - 5:00 PM Rm. C (Rm.166,2nd Flr.,Buld.No.1)

Chair:Yen-Ling Kuo(Nagaoka University of Technology), Takumi Nishimoto

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

1:30 PM - 1:45 PM

[12] Grain boundary oxygen diffusion in polycrystalline Al₂O₃ determined by oxidation rate of AlN/Al₂O₃ composites

*Phanuwat Khlaisongkhram¹, Yen-Ling Kuo¹, Makoto Nanko¹ (1. Nagaoka University of Technology)

1:45 PM - 2:00 PM

[13] Strength Recovery Behavior of Ni/Al₂O₃ Self-healing Ceramics
during High Temperature Oxidation

*Daisuke MARUOKA¹, Takehiro HASHIMOTO², Taichi MURAKAMI¹, Eiki KASAI¹ (1. Graduate School of Environmental Studies, Tohoku University)

2:00 PM - 2:15 PM

[14] Effect of oxygen partial pressure on oxidation behavior of SiC dispersed Yttrium Silicate composites by oxidation in water vapor

*Thi　Huong NGUYEN¹, Yen　Ling KUO¹, Makoto NANKO¹ (1. Nagaoka University of Technology)

2:15 PM - 2:30 PM

[15] Influences of composition control and Nb addition on oxidation behavior of Ti₂AlC ceramics

*Naoya Yamaguchi¹, Ryutaro Sugai¹, Dąbek Jaroslav², Brylewski Tomasz², Yen-Ling Kuo¹, Makoto Nanko¹ (1. Nagaoka University of Technology, 2. AGH University of Science and Technology)

break （2:30 PM - 2:45 PM）

2:45 PM - 3:00 PM

[16] Boiling Water Reactor Severe Accident Conditions Evaluation of Steam Oxidation Reaction of SUS304-B₄C Melt Solidified Products

*KOSUKE INOUE¹, AYUMI ITOH², SHINTARO YASUI^2,3, YOSHINAO KOBAYASHI^1,2 (1. School of Material and Chemical Technology, Tokyo Institute of Technology, 2. Laboratory for Zero-Carbon Energy, Tokyo Institute of Technology, 3. Laboratory for Materials and Structures, Tokyo Institute of Technology)

3:00 PM - 3:15 PM

[17] High temperature corrosion behavior of martensitic stainless steel in water vapor containing HCl at 350℃

*Sakka TAKERU¹, Hayashi Shigenari², Yoneda Suzue², Yamamoto Ryotaro³ (1. Graduate School of Engineering, Hokkaido University, 2. Faculty School of Engineering, Hokkaido University, 3. Ebara Corporation)

3:15 PM - 3:30 PM

[18] The effect of Cr content on oxidation behavior and the microstructure of Al₂O₃ scale on Al-containing ferritic stainless steels for SOFCs interconnect

*shouh　heng Tai¹, Febry Muhammad², Shigenari Hayashi³ (1. Hokkaido Univ., 2. JFE Steel Corp., 3. Hokkaido Univ.)

3:30 PM - 3:45 PM

[19] Co-doping Y/Hf on the oxidation behavior of alumina-forming Co-based oxide dispersion strengthened superalloys

*Hao YU¹, Sosuke Kondo¹, Yasuyuki Ogino¹, Ryuta Kasada¹ (1. Tohoku Uni.)

break （3:45 PM - 4:00 PM）

4:00 PM - 4:15 PM

[20] Interactive Effects of Nb and Ti on Cr₂O₃ Scale Formation on Austenitic Steels

*Ryo Tatsushima¹, Shigenari Hayashi², Suzue Yoneda² (1. Hokkaido Univ.(Master), 2. Hokkaido Univ.)

4:15 PM - 4:30 PM

[21] Study on pre-oxidation method of thermal barrier coatings

*Masahiro NEGAMI^1,2, Kohei KYUMA², Makoto AZUMA², Tomoki TANIGUCHI², Yoko YAMABE-MITARAI¹ (1. The Univ. of Tokyo, 2. Kawasaki Heavy Industries)

4:30 PM - 4:45 PM

[22] In-situ observation of oxidation behavior of Fe-Cr alloys in CO₂

*Miremu Niimi¹, Mitsutoshi Ueda² (1. Tokyo Tech, 2. Tokyo Tech)

4:45 PM - 5:00 PM

[23] Improvement of removability of oxide scale formed on steel by adding SiO₂

*Aya HARASHIMA¹ (1. Nippon Steel)

一般講演

[G] High Temperature Oxidation and Corrosion (2)

Thu. Mar 9, 2023 1:00 PM - 2:00 PM Rm. C (Rm.166,2nd Flr.,Buld.No.1)

Chair:Suzue Yoneda(Hokkaido University)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

1:00 PM - 1:15 PM

[24] Effect of Steam Partial Pressure on Water Vaper Oxidation Behavior of Ni-Based Alloys for Oxygen-Hydrogen Combustion Turbines

*Lisa Aoki¹, Kiyoshi Imai¹, Hiromasa Kanome¹, Satoru Kuboya¹ (1. Toshiba Energy Systems & Solutions Corporation)

1:15 PM - 1:30 PM

[25] Effect of hydrogen concentration on high-temperature oxidation behavior of SOEC stainless steels under Air/H₂+H₂O dual atmosphere

*yasutaka Kawada¹, Kiyoshi Imai¹, Hiromasa Kanome¹, Riko Inuzuka¹, Norikazu Osada¹ (1. Toshiba Energy Systems & Solutions Corporation)

1:30 PM - 1:45 PM

[26] High temperature oxidation of Fe sandwiched between Ar-50%H₂ and Ar-1%O₂ at 823 K

*Daisuke Yahisa¹, Kenichi Kawamura² (1. Tokyo Tech., 2. Tokyo Tech.)

1:45 PM - 2:00 PM

[27] Investigation of the oxidation Behavior of Pure Iron using Hydrogen Sensor and Oxygen Sensor under Hydrogen Combustion environment

*Seiya HARA¹, Hiroki TAKAHASHI², Michihisa FUKUMOTO² (1. Akita Univ(M1)., 2. Akita Univ.)

一般講演

[G] Corrosion and Corrosion Protection

Fri. Mar 10, 2023 9:00 AM - 11:30 AM Rm. C (Rm.166,2nd Flr.,Buld.No.1)

Chair:Yoshinao Hoshi(Nagoya Institute of Technology), Hiroaki Tsutiya(Oosaka univ.)

表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

9:00 AM - 9:15 AM

[36] Pitting corrosion behavior of sintered Type 316L stainless steel

*Haruka SAITO¹, Izumi MUTO², Masashi NISHIMOTO², Yu SUGAWARA² (1. Tohoku Univ., 2. Tohoku Univ.)

9:15 AM - 9:30 AM

[37] The analysis of corrosion behavior of Fe-P binary alloys in acidic solution

*Haruka Sato¹, Izumi Muto¹, Masashi Nishimoto¹, Yu Sugawara¹, Takuya Hara¹, Takumi Nishimoto² (1. Tohoku Univ., 2. Steel Research Lab., Nippon Steel Corp.)

9:30 AM - 9:45 AM

[38] Electrochemical parameters of a steel and an aluminum alloy for simulation of corrosion

*Yasuhiro MASUDA¹, Hiroaki TSUCHIYA¹, Shinji FUJIMOTO¹ (1. Osaka Univ.)

9:45 AM - 10:00 AM

[39] Interactions between Stress-induced Transformation and Hydrogen for Ni-Ti Superelastic Alloy: Degradation Mitigation Behavior with Amount of Damage

*Kuga ANDO¹, Ken’ichi YOKOYAMA² (1. Kyushu Inst. of Tech., 2. Kyushu Inst. of Tech.)

break （10:00 AM - 10:15 AM）

10:15 AM - 10:30 AM

[40] Study on corrosion process of as-cast and solution-heat-treated Mg-Al alloys in saltwater environment using electrochemical and AE techniques

*Ataru OKI¹, Michiaki YAMASAKI², Daria Drozdenko³ (1. Kumamoto Univ., 2. MRC, Kumamoto Univ., 3. Charles Univ.)

10:30 AM - 10:45 AM

[41] In-situ observation of localized corrosion initiation of Mg₈₉Zn₄Y₇ alloy using AE signal-driven high-speed microscopic imaging

*Nobu Yatagai¹, Kaige Wu², Takayuki Shiraiwa², Manabu Enoki² (1. The University of Tokyo (M1), 2. The University of Tokyo)

10:45 AM - 11:00 AM

[42] Statistical analysis of local microstructures initiating pitting corrosion by particle analysis and intermittent anodic polarization

*Kaige WU¹, Nobu YATAGAI¹, Takayuki SHIRAIWA¹, Manabu ENOKI¹ (1. The Univ. of Tokyo)

11:00 AM - 11:15 AM

[43] Effect of Rolling Rate on Origination of Exfoliation Corrosion in Cold-Rolled LA143 Alloy

*Taiki MORISHIGE¹, Nao MEKATA¹, Sayaka NAKATA², Toshihide TAKENAKA¹ (1. Kansai Univ., 2. Kansai Univ. (Present: Daihatsu Motor Co.))

11:15 AM - 11:30 AM

[44] Microstructure and organic coating properties of chromium-free Ti-based conversion coatings on A6063 and A3003 aluminum alloys

*Nobuyuki Banjo^1,2, Taisuke Sasaki³, Kazuhiro Hono^1,3 (1. Univ. of Tsukuba, 2. YKK AP, 3. NIMS)

Sessions

5.Materials Chemistry » Aqueous Corrosion and High Temperature Corrosion Performance

[G] High Temperature Oxidation and Corrosion (1)

[12] Grain boundary oxygen diffusion in polycrystalline Al₂O₃ determined by oxidation rate of AlN/Al₂O₃ composites

[13] Strength Recovery Behavior of Ni/Al₂O₃ Self-healing Ceramics
during High Temperature Oxidation

[14] Effect of oxygen partial pressure on oxidation behavior of SiC dispersed Yttrium Silicate composites by oxidation in water vapor

[15] Influences of composition control and Nb addition on oxidation behavior of Ti₂AlC ceramics

[16] Boiling Water Reactor Severe Accident Conditions Evaluation of Steam Oxidation Reaction of SUS304-B₄C Melt Solidified Products

[17] High temperature corrosion behavior of martensitic stainless steel in water vapor containing HCl at 350℃

[18] The effect of Cr content on oxidation behavior and the microstructure of Al₂O₃ scale on Al-containing ferritic stainless steels for SOFCs interconnect

[19] Co-doping Y/Hf on the oxidation behavior of alumina-forming Co-based oxide dispersion strengthened superalloys

[20] Interactive Effects of Nb and Ti on Cr₂O₃ Scale Formation on Austenitic Steels

[21] Study on pre-oxidation method of thermal barrier coatings

[22] In-situ observation of oxidation behavior of Fe-Cr alloys in CO₂

[23] Improvement of removability of oxide scale formed on steel by adding SiO₂

[G] High Temperature Oxidation and Corrosion (2)

[24] Effect of Steam Partial Pressure on Water Vaper Oxidation Behavior of Ni-Based Alloys for Oxygen-Hydrogen Combustion Turbines

[25] Effect of hydrogen concentration on high-temperature oxidation behavior of SOEC stainless steels under Air/H₂+H₂O dual atmosphere

[26] High temperature oxidation of Fe sandwiched between Ar-50%H₂ and Ar-1%O₂ at 823 K

[27] Investigation of the oxidation Behavior of Pure Iron using Hydrogen Sensor and Oxygen Sensor under Hydrogen Combustion environment

[G] Corrosion and Corrosion Protection

[36] Pitting corrosion behavior of sintered Type 316L stainless steel

[37] The analysis of corrosion behavior of Fe-P binary alloys in acidic solution

[38] Electrochemical parameters of a steel and an aluminum alloy for simulation of corrosion

[39] Interactions between Stress-induced Transformation and Hydrogen for Ni-Ti Superelastic Alloy: Degradation Mitigation Behavior with Amount of Damage

[40] Study on corrosion process of as-cast and solution-heat-treated Mg-Al alloys in saltwater environment using electrochemical and AE techniques

[41] In-situ observation of localized corrosion initiation of Mg₈₉Zn₄Y₇ alloy using AE signal-driven high-speed microscopic imaging

[42] Statistical analysis of local microstructures initiating pitting corrosion by particle analysis and intermittent anodic polarization

[43] Effect of Rolling Rate on Origination of Exfoliation Corrosion in Cold-Rolled LA143 Alloy

[44] Microstructure and organic coating properties of chromium-free Ti-based conversion coatings on A6063 and A3003 aluminum alloys

Authentication