JpGU-AGU Joint Meeting 2020

Presentation information

[J] Poster

M (Multidisciplinary and Interdisciplinary) » M-IS Intersection

[M-IS32] Gas hydrate in environmental-resource sciences

convener:Hitoshi Tomaru(Department of Earth Sciences, Chiba University), Akihiro Hachikubo(Kitami Institute of Technology), Shusaku Goto(Institute for Geo-Resources and Environment National Institute of Advanced Industrial Science and Technology), Atsushi Tani(Department of Human Environmental Science, Graduate School of Human Development and Environment, Kobe University)

[MIS32-P12] Direct measurement of hydration number of gas hydrates

*RYOYA KAMATA1, Hiromi Kimura1, Emi Sugimori1, Akihiro Hachikubo1, Satoshi Takeya2 (1.Kitami Institute Of Technology, 2.National Institute of Advanced Industrial Science and Technology (AIST))

Keywords:gas hydrate, hydration number, argon, methane

Hydration number of gas hydrates is an important parameter, and it decides quality of natural gas hydrates. In the case of full occupancy of methane, hydration number of the crystallographic structure I becomes 5.75, however, hydration number of methane hydrate has been reported as 6, indicating that empty cages exist. Hydration number depends on temperature and pressure at the formation process (Cady, 1981; 1983) as van der Waals & Platteeuw model predicts. In this study, we tried to obtain hydration number of gas hydrates directly by a gravimetric determination. We selected argon as a guest gas, forms the crystallographic structure II. Theoretical value of hydration number is 5.67 in the case of full occupancy. We put 5 g of fine ice powder into a pressure chamber (volume: 42 mL), and introduced pure argon (purity: 99.999%, Air Water Inc.). Temperature was controlled at around 273 K to form argon hydrate. After completion of formation, the residual gas was evacuated at 77 K without dissociation of hydrate. Then, we weighed the cell before and after degasification and calculated weights of gas and water. Purity of the argon hydrate sample was checked by PXRD and it is confirmed that contamination of ice was less than 1%. Besides this, argon hydrate was synthesized in another cell (volume: 30 mL) and measured its equilibrium pressure from 270 K to 276 K. Hydration number at the quadruple point was estimated using Clausius-Clapeyron equation. Hydration number of argon hydrate obtained by gravimetric determination decreased with increasing pressure at the formation process; 6.7 at 10.2 MPa and 5.8 at 18.7 MPa. Hydration number at the quadruple point (273.2 K and 8.27 MPa) was 6.9, agrees with the data by gravimetric determination.


Cady GH (1981) Composition of clathrate gas hydrates of CHClF2, CCl3F, Cl2, ClO3F, H2S, and SF6. J Phys Chem 85: 3225-3230

Cady GH (1983) Composition of Clathrate Gas Hydrates of H2S, Xe, SO2, Cl2, CH3Cl, CH3Br, CHClF2, CCl2F2, and C3H8. J Phys Chem 87: 4437-4441