Poster presentation

12. Organic Molecules and Bioelectronics » 12.1 Fabrications and Structure Controls

[18p-PB12-1~22] 12.1 Fabrications and Structure Controls

Thu. Sep 18, 2014 4:00 PM - 6:00 PM PB12 (Gymnasium2)

ポスター掲示時間16:00～18:00(PB12会場)

△：Young Scientist Oral Presentation Award Applied
▲：English Presentation
▼：Both Award Applied and English Presentation

+Add all to schedule

4:00 PM - 6:00 PM

[18p-PB12-1] Viscoelastic Analysis of Liquid Crystal Thin Film in the Evaporation Process

Hidemi Haraki¹, ^○Shotaro Kataoka¹, Syun Suyama¹, Atsushi Kubono¹ (Shizuoka Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-2] Improvement of Accuracy for Selective Coating of LC Alignment Materials on Substrates with ITO Patterns by the ESD Method with Two Different Electric Potential

^○Yuta Uchida¹, Yukihiro Kudoh¹, Taiju Takahashi² (Kogakuin Univ.¹, Kogakuin Univ.²)

4:00 PM - 6:00 PM

[18p-PB12-3] Fabrication of Liquid Crystalline Micro Rods by Using the Electro Spinning Method

^○Yusuke Watado¹, Yukihiro Kudoh¹, Taiju Takahashi¹ (Kogakuin Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-4] Fabrication and evaluation of slippery liquid-infused porous surface by electrospinning method

^○(M1)Takuya Tsukamoto¹, Seimei Shiratori¹ (Grad. Sch. Sci. Tech., Keio Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-5] Fabrication of Hole Transport Layer by Mist-Vapor Deposition Method and Its Surface Potential

^○Shigetaka Katori¹, Nobuo Satoh² (Tsuyama National College of Technology¹, Chiba Inst. Tech.²)

4:00 PM - 6:00 PM

[18p-PB12-6] Fabrication of microcapsules consisting of polyelectrolytes and carbon nanotubes and their response to near infrared irradiation

^○Haruyuki Saito¹, Noritaka Kato¹ (Graduate School of Science and Technology, Meiji Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-7] Control of Shell-Thickness of Mesoporous Silica Hollow Capsules and Observation of Release Rate

^○Yu Yamaguchi¹, Noritaka Kato¹ (Graduate school of Science and Technology, Meiji Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-8] Effect of Solvent on Electrophoretic Deposition of Diamond Nanoparticles

Yosuke Goto¹, Kuniaki Tanaka¹, Fujio Ohishi², ^○Hiroaki Usui¹ (Tokyo Univ. Agricul. & Technol.¹, Kanagawa Univ.²)

4:00 PM - 6:00 PM

[18p-PB12-9] Position-controlled alignment of gold nanoparticles on a silicon substrate

^○Kazuo Itoh¹, Takayuki Mashiyama¹, Katsuya Noguchi¹ (Gunma Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-10] Wettability control of metal surfaces using benzenthiol derivatives

^○Shingo Tatara¹, Yasutaka Kuzumoto², Masatoshi Kitamura^1,3 (Kobe Univ.¹, SHARP Corp.², NanoQuine, Univ. Tokyo³)

4:00 PM - 6:00 PM

[18p-PB12-11] One-direction growth of organic semiconductors controlled by contact angles of solution

^○Sota Koshika¹, Ryousuke Kamiya¹, Shinpei Yamamoto², Mitsuharu Suzuki², Hiroko Yamada², Noriyuki Yoshimoto¹ (Iwate Univ.¹, NAIST²)

4:00 PM - 6:00 PM

[18p-PB12-12] Orientation Control of Pentacene for the application to Organic Photovoltaic Devices

Takuhei Fujisawa^1,2, Toshiko Mizokuro¹, Claire Heck¹, Hiroyuki Aota², ^○Nobutaka Tanigaki^1,2 (AIST-UBIQEN¹, Kansai Univ.²)

4:00 PM - 6:00 PM

[18p-PB12-13] Cross-linked polyurea thin films prepared by vapor deposition polymerization

Kouta Asai¹, ^○Kenichi Horai¹, Masatoshi Ikebe¹, Takuma Kobayashi¹, Atsushi Kubono¹ (Shizuoka Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-14] Characterization of Sasol H1 Thin Films Prepared by Different Deposition Methods

^○Keita Sato¹, Toshihiro Niwano¹, Kotaro Kushida¹, Atsushi Hatakeyama¹, Kuniaki Tanaka¹, Hiroaki Usui¹ (Tokyo Univ. Agricul. & Technol.¹)

4:00 PM - 6:00 PM

[18p-PB12-15] Preparation of Ag-Cu alloy seed layer on a plastic surface

^○Tomoki Kohno¹, Kuniaki Tanaka¹, Hiroaki Usui¹, Takayuki Asukata², Mamoru Yoshida², Yoshito Motegi² (Tokyo Univ. Agricul. & Technol.¹, Toyokasei Co. Ltd.²)

4:00 PM - 6:00 PM

[18p-PB12-16] Effect of expansion of ITO for semi-transparent organic light emitting diodes with top ITO electrode fabricated by face target spattering process

^○Kouji Suemori¹, Satoshi Hoshino¹, Nobuki Ibaraki¹, Toshihide Kamata¹ (AIST¹)

4:00 PM - 6:00 PM

[18p-PB12-17] Interface Control of Organic EL Device with a Reactive Self-Assembled Monolayer

^○Sotaro Ono¹, Hiroaki Usui¹, Songho Kim¹, Rigoberto Advincula², Kunikaki Tanaka¹ (Tokyo Univ. Agricul. & Technol.¹, Case Western Rserve Univ.²)

4:00 PM - 6:00 PM

[18p-PB12-18] Fabrication of photofunctional polymer device by laser irradiation

^○Yoshihiro Tada¹, Kazuhiro Tada², Hisaya Oda² (Muroran Inst. of Tech.¹, Chitose Inst. of Sci. & Tech.²)

4:00 PM - 6:00 PM

[18p-PB12-19] Gradient functional characteristic of omnidirectional anti reflection by nano particle stacks

^○(M2)Kenta Fukada¹, Seimei Shiratori¹ (Grad. Sch. Sci. Tech., Keio Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-20] Fabrication and evaluation of clay/polymer hetero structure by applied voltage layer-by-layer adsorption method

^○Momoko Notoya¹, Seimei Shiratori¹ (Grad. Sch. Sci. Tech., Keio Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-21] Fabrication of One-dimensional Polymer Complex Nanocrystals and their Optical Properties

^○Ryuju Suzuki¹, Tsunenobu Onodera¹, Hitoshi Kasai¹, Hidetoshi Oikawa¹ (IMRAM, Tohoku Univ.¹)

4:00 PM - 6:00 PM

[18p-PB12-22] Influence of deliquescent salt and its concentration on self-healing ability of Layer-by-Layer self-assembly multilayer.

^○(M2)Taihei Taniguchi¹, Seimei Shiratori¹ (Grad. Sch. Sci. Tech., Keio Univ.¹)

Session information

[18p-PB12-1~22] 12.1 Fabrications and Structure Controls