Oral presentation

16 Amorphous and Microcrystalline Materials » 16.3 Bulk, thin-film and other silicon-based solar cells

[15p-2S-1~14] 16.3 Bulk, thin-film and other silicon-based solar cells

Tue. Sep 15, 2015 1:30 PM - 5:15 PM 2S (3F Lounge)

座長:田口幹朗(パナソニック),久松正(シャープ)

△：Young Scientist Oral Presentation Award Applied
▲：English Presentation
▼：Both Award Applied and English Presentation

+Add all to schedule

1:30 PM - 1:45 PM

[15p-2S-1] Fabrication of interdigitated back contact silicon heterojunction solar cells by inkjet printing using low-cost paint

〇Hideyuki Takagishi¹, Aiko Sato¹, Hiroshi Noge¹, Kimihiko Saito¹, Michio Kondo^1,2 (1.Fukushima Univ., 2.AIST)

1:45 PM - 2:00 PM

[15p-2S-2] Simulation of MIS-type solar cells with high/low-workfucntion electrodes

〇(PC)Takefumi Kamioka¹, Yutaka Hayashi¹, Kyotaro Nakamura², Yoshio Ohshita¹ (1.TTI, 2.Meiji Univ.)

2:00 PM - 2:15 PM

[15p-2S-3] Temperature-Dependent Effective Lifetime Measurement of Crystalline Silicon Passivated by Amorphous Silicon Oxide

〇masahiro inaba¹, shinsuke miyajima¹ (1.Tokyo Tech.)

2:15 PM - 2:30 PM

[15p-2S-4] Analysis of electric field passivation based on ultra-shallow P doping into Si substrates by utilizing PH₃ gas

〇(M1)Yating Huang¹, Yusuke Hoshi¹, Isao Takahashi¹, Noritaka Usami¹ (1.Nagoya Univ.)

2:30 PM - 2:45 PM

[15p-2S-5] LIA reactive sputtered film evaluation for the solar cell application

〇Atsushi Osawa¹ (1.SCREEN Finetech)

2:45 PM - 3:00 PM

[15p-2S-6] Evaluation of the effect of silicon oxide interlayer between spin-coated alumina passivation films and silicon substrates

〇Ryosuke Watanabe¹, Mizuho Kawashima¹, Yoji Saito¹ (1.Seikei Univ.)

3:00 PM - 3:15 PM

△ [15p-2S-7] The Relation of AlO_x Passivation Film Structures and Fixed Charge Density

〇Sho Kitano¹, Yuki Miki¹, Koji Iguchi¹, Shohei Miki¹, Norihiro Ikeno², Yoshihiro Yamashita², Atsushi Ogura², Haruhiko Yoshida¹, Shin-ichi Satoh¹, Koji Maeda¹, Koji Arafune¹ (1.Univ. of Hyogo, 2.Meiji Univ.)

Break (3:15 PM - 3:30 PM)

3:30 PM - 3:45 PM

△ [15p-2S-8] Behavior of the potential-induced degradation for photovoltaic modules fabricated using flat mono-crystalline silicon cells with different surface orientations

〇Seira Yamaguchi¹, Atsushi Masuda², Keisuke Ohdaira¹ (1.JAIST, 2.AIST)

3:45 PM - 4:00 PM

[15p-2S-9] A Characterization of PID of PV modules using Laser Terahertz Emission Microscope(LTEM)

HIDETOSHI NAKANISHI¹, 〇FUJIKAZU KITAMURA¹, KIYOTAKA MATSUO¹, MINORU MIZUBATA¹, KATSUHIKO SHIRASAWA², TOSHIMITSU MOCHIZUKI², HIDETAKA TAKATO², IWAO KAWAYAMA³, MASAYOSHI TONOUCHI³ (1.SCREEN, 2.FREA,AIST, 3.ILE Osaka Univ.)

4:00 PM - 4:15 PM

[15p-2S-10] Simulation analysis of bending load test for crystalline silicon photovoltaic modules

〇Soh Suzuki¹, Tadanori Tanahashi², Takuya Doi², Atsushi Masuda² (1.ESPEC CORP., 2.AIST)

4:15 PM - 4:30 PM

[15p-2S-11] Analysis Procedures for Hygrothermal-Stress Induced Failures in c-Si PV Modules

〇Tadanori Tanahashi¹, Atsushi Masuda¹ (1.AIST)

4:30 PM - 4:45 PM

△ [15p-2S-12] Evaluation of acetic acid distribution in photovoltaic modules by nanostructured pH sensor

〇(DC)Takashi Asaka¹, Tomohiro Itayama¹, Shuntaro Wako¹, Hideaki Nagasaki¹, Kentaro Iwami¹, Chizuko Yamamoto², Yukiko Hara², Atsushi Masuda², Norihiro Umeda¹ (1.Tokyo Univ. of Agri. & Tech., 2.AIST)

4:45 PM - 5:00 PM

[15p-2S-13] Detection of acetic acid in PV modules by change in relative reflectance of tin film

〇TOMOHIRO ITAYAMA¹, Takashi Asaka¹, Shuntaro Wako¹, Hideaki Nagasaki¹, Kentaro Iwami¹, Chizuko Yamamoto², Yukiko Hara², Atsushi Masuda², Norihiro Umeda¹ (1.Tokyo Univ. of Agri. & Tech., 2.AIST)

5:00 PM - 5:15 PM

[15p-2S-14] Behavior of acetic acid generation in light irradiation test for photovoltaic modules

〇HIDEYUKI MORITA¹, TAKAO AMIOKA¹, TAKUYA DOI², ATSUSHI MASUDA² (1.Toray, 2.AIST)

Session information

[15p-2S-1~14] 16.3 Bulk, thin-film and other silicon-based solar cells

[15p-2S-1] Fabrication of interdigitated back contact silicon heterojunction solar cells by inkjet printing using low-cost paint

[15p-2S-2] Simulation of MIS-type solar cells with high/low-workfucntion electrodes

[15p-2S-3] Temperature-Dependent Effective Lifetime Measurement of Crystalline Silicon Passivated by Amorphous Silicon Oxide

[15p-2S-4] Analysis of electric field passivation based on ultra-shallow P doping into Si substrates by utilizing PH₃ gas

[15p-2S-5] LIA reactive sputtered film evaluation for the solar cell application

[15p-2S-6] Evaluation of the effect of silicon oxide interlayer between spin-coated alumina passivation films and silicon substrates

△ [15p-2S-7] The Relation of AlO_x Passivation Film Structures and Fixed Charge Density

△ [15p-2S-8] Behavior of the potential-induced degradation for photovoltaic modules fabricated using flat mono-crystalline silicon cells with different surface orientations

[15p-2S-9] A Characterization of PID of PV modules using Laser Terahertz Emission Microscope(LTEM)

[15p-2S-10] Simulation analysis of bending load test for crystalline silicon photovoltaic modules

[15p-2S-11] Analysis Procedures for Hygrothermal-Stress Induced Failures in c-Si PV Modules

△ [15p-2S-12] Evaluation of acetic acid distribution in photovoltaic modules by nanostructured pH sensor

[15p-2S-13] Detection of acetic acid in PV modules by change in relative reflectance of tin film

[15p-2S-14] Behavior of acetic acid generation in light irradiation test for photovoltaic modules

Authentication

Session information

[15p-2S-1~14] 16.3 Bulk, thin-film and other silicon-based solar cells

△ [15p-2S-7] The Relation of AlOx Passivation Film Structures and Fixed Charge Density

△ [15p-2S-8] Behavior of the potential-induced degradation for photovoltaic modules fabricated using flat mono-crystalline silicon cells with different surface orientations

△ [15p-2S-12] Evaluation of acetic acid distribution in photovoltaic modules by nanostructured pH sensor

Authentication

△ [15p-2S-7] The Relation of AlO_x Passivation Film Structures and Fixed Charge Density