1:15 PM - 1:30 PM

[16p-1G-1] Wireless 4-Bit Digital Transmission by Solution-Processed Organic Transistors

〇Hiroyuki Matsui¹, Akifumi Yamamura¹, Mayumi Uno², Junshi Soeda¹, Shinji Kishimura¹, Shunki Sakai¹, Hideyuki Tanaka¹, Yusuke Kanaoka², Bu-Sung Cha², Nobuaki Isahaya³, Kengo Nakayama², Shingo Yagyu², Yoshihisa Usami⁴, Takayoshi Yokoyama⁵, Yuuki Oowashi⁵, Chikahiko Mitsui¹, Toshihiro Okamoto^1,6, Jun Takeya^1,3 (1.Univ. of Tokyo, 2.TRI-Osaka, 3.PI-CRYSTAL, 4.Fujifilm, 5.Toppan Forms, 6.PRESTO)

1:30 PM - 1:45 PM

[16p-1G-2] Rectifiers based on thin film transistors using highly semiconductor enriched Single wall carbon nanotube-polymer complex

〇Hiroji Shimizu¹, Kazuki Isogai¹, Seiichiro Murase¹ (1.Toray)

1:45 PM - 2:00 PM

△ [16p-1G-3] Low-operating voltage organic circuits with polymer gate dielectrics

〇(PC)Tomoyuki Yokota^1,2, Tsuyoshi Sekitani^2,3, Takao Someya^1,2 (1.Univ. of Tokyo, 2.JST, ERATO, 3.Osaka University)

2:00 PM - 2:15 PM

△ [16p-1G-4] Solution-processed organic transistor memory based on Si nanoparticles as a nano-floating gate

〇Yu Kimura¹, Azusa Hamaguchi¹, Yoshinori Ikeda¹, Takashi Nagase^2,3, Hiroyoshi Naito^2,3, Kazuo Takimiya⁴, Takashi Shiro¹ (1.TEIJIN RIMITED, 2.Osaka Pref. Univ., 3.RIMED, 4.RIKEN)

2:15 PM - 2:30 PM

△ [16p-1G-5] Fabrication of printed organic complementary circuits with bilayer structure

〇YASUNORI TAKEDA^1,2,3, Kazuaki Kakita⁴, Hidetaka Shima⁴, Yasuhiro Yoneda⁴, Yasuhiro Tanaka⁴, Masashi Mamada^1,5, Koji Yokosawa², Kenjiro Fukuda^1,2,6, Daisuke Kumaki^1,2, Shizuo Tokito^1,2 (1.Yamagata Univ., 2.ROEL, Yamagata Univ., 3.JSPS DC, 4.Ube Industries, Ltd., 5.INOEL, Yamagata Univ., 6.JST PRESTO)

Break (2:30 PM - 2:45 PM)

2:45 PM - 3:00 PM

[16p-1G-6] Titania capacitor with high capacity and flexibility

〇Akira Shimada¹, Naoji Matsuhisa^1,2, Yutaro Tachibana^1,3, Tomoyuki Yokota^1,3, Takao Someya^1,3 (1.Univ. of Tokyo, 2.ALPS, 3.ERATO)

3:00 PM - 3:15 PM

[16p-1G-7] Improvement of operational stability of printed organic circuits using selective control of threshold voltage

〇Rei Shiwaku¹, Yasunori Takeda¹, Takashi Fukuda², Kenjiro Fukuda^1,3,4, Daisuke Kumaki^1,4, Shizuo Tokito^1,4 (1.Graduate School of Science and Engineering, Yamagata Univ., 2.TOSOH CORPORATION, 3.JST PRESTO, 4.Research Center for Organic Electronics, Yamagata Univ.)

3:15 PM - 3:30 PM

△ [16p-1G-8] Fabrication of high-performance printed organic transistors
using DTBDT/polymer blend solution

〇Rei Shiwaku¹, Yasunori Takeda¹, Takashi Fukuda², Kenjiro Fukuda^1,3,4, Daisuke Kumaki^1,4, Shizuo Tokito^1,4 (1.Graduate School of Science and Engineering, Yamagata Univ., 2.TOSOH CORPORATION, 3.JST PRESTO, 4.Research Center for Organic Electronics, Yamagata Univ.)

3:30 PM - 3:45 PM

△ [16p-1G-9] Fabrication and Characterization of High-mobility OFETs by Annealing C8-BTBT/PMMA Double Layers

〇(DC)Kenji Kotsuki¹, Seiji Obata², Koichiro Saiki^1,2 (1.Sch. of Science, The Univ. of Tokyo, 2.Grad. Sch. of Frontier Sciences, The Univ. of Tokyo)

Break (3:45 PM - 4:00 PM)

4:00 PM - 4:15 PM

[16p-1G-10] Effects of Surface Chemical Modification on SuPR-NaP Silver Electrodes: Detection with Surface-Enhanced Raman Spectroscopy and Improvement of Contact Resistance

〇(M1)keisuke aoshima^1,2, katsuo fukuhara², toshikazu yamada², takanari togashi³, masato kurihara³, shunto arai¹, tatsuo hasegawa^1,2 (1.U. Tokyo, 2.AIST FLEC, 3.Yamagata Univ.)

4:15 PM - 4:30 PM

△ [16p-1G-11] All-Printed OTFT Array Based on Silver Electrode Wiring by SuPR-NaP Technique

〇(PC)KATSUO FUKUHARA¹, TOSHIKAZU YAMADA¹, JUN'YA TSUTSUMI¹, SATOSHI MATSUOKA¹, KEISUKE AOSHIMA², SYUNTO ARAI², TAKANARI TOGASHI³, MASATO KURIHARA³, TATSUO HASEGAWA^1,2 (1.AIST FLEC, 2.Univ. Tokyo, 3.Yamagata Univ.)

4:30 PM - 4:45 PM

[16p-1G-12] Gate-Modulation Imaging of Distributed Device Performance for Large-Area Organic Thin-Film Transistor Arrays

〇Junya Tsutsumi¹, Satoshi Matsuoka¹, Katsuo Fukuhara¹, Toshikazu Yamada¹, Tatsuo Hasegawa^1,2 (1.AIST, 2.U.Tokyo)

4:45 PM - 5:00 PM

△ [16p-1G-13] Spatial Mapping of Accumulated Charge Carriers in Polycrystalline Organic Thin-Film Transistors by Gate-Modulation Imaging Tecunique

〇Satoshi Matsuoka¹, Jun'ya Tsutsumi¹, Toshikazu Yamada¹, Tatsuo Hasegawa^1,2 (1.AIST, 2.U. Tokyo)

Session information

[16p-1G-1~13] 12.4 Organic light-emitting devices and organic transistors

[16p-1G-1] Wireless 4-Bit Digital Transmission by Solution-Processed Organic Transistors

[16p-1G-2] Rectifiers based on thin film transistors using highly semiconductor enriched Single wall carbon nanotube-polymer complex

△ [16p-1G-3] Low-operating voltage organic circuits with polymer gate dielectrics

△ [16p-1G-4] Solution-processed organic transistor memory based on Si nanoparticles as a nano-floating gate

△ [16p-1G-5] Fabrication of printed organic complementary circuits with bilayer structure

[16p-1G-6] Titania capacitor with high capacity and flexibility

[16p-1G-7] Improvement of operational stability of printed organic circuits using selective control of threshold voltage

△ [16p-1G-8] Fabrication of high-performance printed organic transistors
using DTBDT/polymer blend solution

△ [16p-1G-9] Fabrication and Characterization of High-mobility OFETs by Annealing C8-BTBT/PMMA Double Layers

[16p-1G-10] Effects of Surface Chemical Modification on SuPR-NaP Silver Electrodes: Detection with Surface-Enhanced Raman Spectroscopy and Improvement of Contact Resistance

△ [16p-1G-11] All-Printed OTFT Array Based on Silver Electrode Wiring by SuPR-NaP Technique

[16p-1G-12] Gate-Modulation Imaging of Distributed Device Performance for Large-Area Organic Thin-Film Transistor Arrays

△ [16p-1G-13] Spatial Mapping of Accumulated Charge Carriers in Polycrystalline Organic Thin-Film Transistors by Gate-Modulation Imaging Tecunique

Authentication

Session information

[16p-1G-1~13] 12.4 Organic light-emitting devices and organic transistors

[16p-1G-1] Wireless 4-Bit Digital Transmission by Solution-Processed Organic Transistors

[16p-1G-2] Rectifiers based on thin film transistors using highly semiconductor enriched Single wall carbon nanotube-polymer complex

△ [16p-1G-3] Low-operating voltage organic circuits with polymer gate dielectrics

△ [16p-1G-4] Solution-processed organic transistor memory based on Si nanoparticles as a nano-floating gate

△ [16p-1G-5] Fabrication of printed organic complementary circuits with bilayer structure

[16p-1G-6] Titania capacitor with high capacity and flexibility

[16p-1G-7] Improvement of operational stability of printed organic circuits using selective control of threshold voltage

△ [16p-1G-8] Fabrication of high-performance printed organic transistorsusing DTBDT/polymer blend solution

△ [16p-1G-9] Fabrication and Characterization of High-mobility OFETs by Annealing C8-BTBT/PMMA Double Layers

[16p-1G-10] Effects of Surface Chemical Modification on SuPR-NaP Silver Electrodes: Detection with Surface-Enhanced Raman Spectroscopy and Improvement of Contact Resistance

△ [16p-1G-11] All-Printed OTFT Array Based on Silver Electrode Wiring by SuPR-NaP Technique

[16p-1G-12] Gate-Modulation Imaging of Distributed Device Performance for Large-Area Organic Thin-Film Transistor Arrays

△ [16p-1G-13] Spatial Mapping of Accumulated Charge Carriers in Polycrystalline Organic Thin-Film Transistors by Gate-Modulation Imaging Tecunique

Authentication

△ [16p-1G-8] Fabrication of high-performance printed organic transistors
using DTBDT/polymer blend solution