2015年 第76回応用物理学会秋季学術講演会

講演情報

一般セッション(口頭講演)

12 有機分子・バイオエレクトロニクス » 12.5 有機太陽電池

[14a-1G-1~8] 12.5 有機太陽電池

2015年9月14日(月) 09:00 〜 11:15 1G (レセプションホール2)

座長:當摩 哲也(金沢工大)

10:45 〜 11:00

[14a-1G-8] Zinc oxide nanostructures by wet oxidation of zinc thin film for hybrid solar cells

〇(DC)Jennifer DamascoTy1, Christian Mark Pelicano2, Donnabelle Balela2, Hisao Yanagi1 (1.NAIST, 2.UP-Diliman)

キーワード:zinc oxide,nanostructure,hybrid solar cell

Zinc oxide (ZnO) is a promising semiconductor material for optoelectronic devices. Due to its wide range of useful properties, numerous devices from light-emitting diodes to gas sensors have been developed. ZnO can be grown by a variety of techniques such as hydrothermal method, chemical vapor deposition, and magnetron sputtering among others. However, these methods, in particular for nanostructured ZnO, involve reaction systems such as toxic reagents, elevated temperature, and costly equipment. The challenge now is to develop a simple and economical technique for the synthesis of ZnO nanostructures.
In this work, we demonstrate the growth of ZnO nanostructures from a metallic Zn thin film at low temperatures using wet oxidation in water. Previous work on wet oxidation showed the effect of water vapor on ZnO formation. Also, Tan et al. reported the influence of growth time on ZnO nanostructures using hot water oxidation of Zn foils. Herein, the Zn thin film precursor was deposited on fluorine-doped tin oxide substrates by vacuum deposition. The substrates are then immersed in 90oC water for 6h and 16h to investigate the effect of growth time on the resulting morphologies of ZnO nanostructures.
The deposited Zn thin film initially looks metallic and has a reflective surface. After wet oxidation, the thin film becomes transparent. At this point, the Zn thin film is converted to ZnO. The metallic Zn thin film is composed of hexagonal-like structures. ZnO nanoparticles having about 150 nm diameters are grown after wet oxidation for 6h. At a longer oxidation time of 16h, the zinc is converted into ZnO nanorods having about 180 nm diameters. In some parts of the film, nanotube structures were obtained. This simple method for a variety of nanostructured ZnO in transparent films at a low temperature process could pave the way to future flexible optoelectronic devices such as hybrid solar cells based on substrates with low thermal stability.