Oral presentation

17 Nanocarbon Technology » 17.4 Device applications

[12p-D6-1~13] 17.4 Device applications

Thu. Mar 12, 2015 1:15 PM - 4:45 PM D6 (16-206)

△：Young Scientist Oral Presentation Award Applied
▲：English Presentation
▼：Both Award Applied and English Presentation

+Add all to schedule

1:15 PM - 1:30 PM

[12p-D6-1] The effect of the carbon onion addition to activated carbon electrode of electric double layer capacitor

〇Yuta Ishii¹, Yuko Aono¹, Atsushi Hirata¹ (1.Tokyo Tech)

1:30 PM - 1:45 PM

△ [12p-D6-2] High temperature during ZnO/C mask for patterning of carbon nanotube forest formed on silicon carbide

〇Masafumi Inaba¹, Chih-Yu Lee¹, Kazuma Suzuki¹, Megumi Shibuya¹, Miho Myodo¹, Yu Hirano¹, Wataru Norimatsu², Michiko Kusunoki², Hiroshi Kawarada¹ (1.Waseda Univ., 2.Nagoya Univ.)

1:45 PM - 2:00 PM

△ [12p-D6-3] Influence of support strength on vibration of carbon nanotube mechanical resonator

〇kenshi inotani¹, masaaki yasuda¹, takayuki arie¹, kuniharu takei¹, seiji akita¹ (1.Osaka Pref Univ.)

2:00 PM - 2:15 PM

[12p-D6-4] Development of complementary paper transistor

〇(B)Kouki Matsui¹, Yoshiki Hamana¹, Takahide Oya¹ (1.Yokohama National Univ.)

2:15 PM - 2:30 PM

△ [12p-D6-5] Control of quantum states in single-walled carbon nanotube single-electron transistors by electric-double-layer gate with ionic liquid

〇(B)Kaho Kamada¹, Kohei Seike¹, Yasushi Kanai¹, Yasuhide Ohno^1,², Kenzo Maehashi^1,³, Koichi Inoue¹, Kazuhiko Matsumoto¹ (1.ISIR, Osaka Univ., 2.Univ. Tokushima, 3.TUAT)

2:30 PM - 2:45 PM

△ [12p-D6-6] Heterogeneously integrated inorganic material-based flexible CMOS circuit

〇Wataru Honda¹, Takayuki Arie¹, Seiji Akita¹, Kuniharu Takei¹ (1.Osaka Pref. Univ.)

2:45 PM - 3:00 PM

[12p-D6-7] Development of thermoelectric generating device using carbon-nanotube-composite paper

〇(B)TADAMITSU INAGAKI¹, TAKAHIDE OOYA¹ (1.Yokohama National Univ.)

Break (3:00 PM - 3:15 PM)

3:15 PM - 3:30 PM

[12p-D6-8] Density and length control of carbon nanotube thin film grown from nanodiamonds and its application to biosensors

〇Hiroto Kase¹, Ryouta Negishi¹, Michiharu Arihuku², Noriko Kiyoyanagi², Yoshihiro Kobayashi¹ (1.Osaka Univ., 2.Nippon Kayaku)

3:30 PM - 3:45 PM

△ [12p-D6-9] High Q-factor mechanical resonance of carbon nanotube by electric charge

〇Masaaki Yasuda¹, Kuniharu Takei¹, Takayuki Arie¹, Seiji Akita¹ (1.Osaka Pref. Univ.)

3:45 PM - 4:00 PM

▼ [12p-D6-10] Highly Efficient and Flexible Organic Solar Cells Using Single-Walled Carbon Nanotube Films Doped with Strong and Safe MoO_x Dopant

〇(D)Il Jeon¹, Kehang Cui¹, Takaaki Chiba¹, Albert Nasibulin², Esko Kauppinen², Shigeo Maruyama¹, Yutaka Matsuo¹ (1.Univ. of Tokyo, 2.Aalto Univ.)

4:00 PM - 4:15 PM

[12p-D6-11] Improvement of efficiency of paint-type dye-sensitized solar cell using Carbon Nanotube paint

〇(B)Yuki Matsunaga¹, Takahide Oya¹ (1.Yokokoku Univ.)

4:15 PM - 4:30 PM

[12p-D6-12] Characterization of the supported state of Pt-Ru nanoparticles to the nanocarbon materials by one-step electrodeposition method and their electrocatalytic properties

〇Haruhiko Yoshitake¹, Shohei Hayase¹, Zhipeng Wang², Hironori Ogata¹ (1.Hosei Univ., 2.Shinshu Univ.)

4:30 PM - 4:45 PM

[12p-D6-13] Control of the defect structure of nanocarbon materials by ion irradiation and analysis of the supported state of Pt nanoparticles by the one-step electrodeposition method

〇Shohei Hayase¹, Haruhiko Yoshitake¹, Tomoaki Nishimura², Wang Zhipeng³, Hironori Ogata^1,⁴ (1.Hosei Univ., 2.Res.Cent.Ion-Beam Tech.Hosei Univ., 3.Shinshu Univ., 4.Res. Center for Micro-Nanotechnol, Hosei Univ.)

Session information

[12p-D6-1~13] 17.4 Device applications

[12p-D6-1] The effect of the carbon onion addition to activated carbon electrode of electric double layer capacitor

△ [12p-D6-2] High temperature during ZnO/C mask for patterning of carbon nanotube forest formed on silicon carbide

△ [12p-D6-3] Influence of support strength on vibration of carbon nanotube mechanical resonator

[12p-D6-4] Development of complementary paper transistor

△ [12p-D6-5] Control of quantum states in single-walled carbon nanotube single-electron transistors by electric-double-layer gate with ionic liquid

△ [12p-D6-6] Heterogeneously integrated inorganic material-based flexible CMOS circuit

[12p-D6-7] Development of thermoelectric generating device using carbon-nanotube-composite paper

[12p-D6-8] Density and length control of carbon nanotube thin film grown from nanodiamonds and its application to biosensors

△ [12p-D6-9] High Q-factor mechanical resonance of carbon nanotube by electric charge

▼ [12p-D6-10] Highly Efficient and Flexible Organic Solar Cells Using Single-Walled Carbon Nanotube Films Doped with Strong and Safe MoO_x Dopant

[12p-D6-11] Improvement of efficiency of paint-type dye-sensitized solar cell using Carbon Nanotube paint

[12p-D6-12] Characterization of the supported state of Pt-Ru nanoparticles to the nanocarbon materials by one-step electrodeposition method and their electrocatalytic properties

[12p-D6-13] Control of the defect structure of nanocarbon materials by ion irradiation and analysis of the supported state of Pt nanoparticles by the one-step electrodeposition method

Authentication

Session information

[12p-D6-1~13] 17.4 Device applications

[12p-D6-1] The effect of the carbon onion addition to activated carbon electrode of electric double layer capacitor

△ [12p-D6-2] High temperature during ZnO/C mask for patterning of carbon nanotube forest formed on silicon carbide

△ [12p-D6-3] Influence of support strength on vibration of carbon nanotube mechanical resonator

[12p-D6-4] Development of complementary paper transistor

△ [12p-D6-5] Control of quantum states in single-walled carbon nanotube single-electron transistors by electric-double-layer gate with ionic liquid

△ [12p-D6-6] Heterogeneously integrated inorganic material-based flexible CMOS circuit

[12p-D6-7] Development of thermoelectric generating device using carbon-nanotube-composite paper

[12p-D6-8] Density and length control of carbon nanotube thin film grown from nanodiamonds and its application to biosensors

△ [12p-D6-9] High Q-factor mechanical resonance of carbon nanotube by electric charge

▼ [12p-D6-10] Highly Efficient and Flexible Organic Solar Cells Using Single-Walled Carbon Nanotube Films Doped with Strong and Safe MoOx Dopant

[12p-D6-11] Improvement of efficiency of paint-type dye-sensitized solar cell using Carbon Nanotube paint

[12p-D6-12] Characterization of the supported state of Pt-Ru nanoparticles to the nanocarbon materials by one-step electrodeposition method and their electrocatalytic properties

[12p-D6-13] Control of the defect structure of nanocarbon materials by ion irradiation and analysis of the supported state of Pt nanoparticles by the one-step electrodeposition method

Authentication

▼ [12p-D6-10] Highly Efficient and Flexible Organic Solar Cells Using Single-Walled Carbon Nanotube Films Doped with Strong and Safe MoO_x Dopant