Oral presentation

16 Amorphous and Microcrystalline Materials » 16.3 Bulk, thin-film and other silicon-based solar cells

[16p-A24-1~11] 16.3 Bulk, thin-film and other silicon-based solar cells

Fri. Sep 16, 2016 1:15 PM - 4:15 PM A24 (201A)

Keisuke Ohdaira(JAIST), Hitoshi Sai(AIST)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

1:15 PM - 1:30 PM

[16p-A24-1] Crystalline silicon solar cell with high efficiency by ion implantation processes

〇Katsuto Tanahashi¹, Masaaki Moriya¹, Yasuhiro Kida¹, Satoshi Utsunomiya¹, Tetsuo Fukuda¹, Katsuhiko Shirasawa¹, Hidetaka Takato¹ (1.AIST)

1:30 PM - 1:45 PM

[16p-A24-2] Quantitative measurement of the dopant concentration distribution in P-implanted emitter of single crystalline silicon solar cell using scanning nonlinear dielectric microscopy

〇Kotaro Hirose¹, Katsuto Tanahashi², Hidetaka Takato², Yasuo Cho¹ (1.Tohoku Univ., 2.AIST)

1:45 PM - 2:00 PM

▲ [16p-A24-3] Front Side Improvement for n-PERT Solar Cell by Removing the Boron-depleted Region

〇SIMAYI SHALAMUJIANG¹, Yasuhiro Kida¹, Katsuhiko Shirasawa¹, Tatsunobu Suzuki², Hidetaka Takato¹ (1.FREA, AIST, 2.Nippon Kasei Chemical Co., Ltd.)

2:00 PM - 2:15 PM

[16p-A24-4] Isolation of Mono-crystalline Silicon Wafer for photovoltaic Cell

〇hiromichi ono¹, yoshiyuki sanpei¹, tsubasa kobayashi¹, yasufumi takashima², shinya sasaki², yasuhiro kida³, toshimitsu mochiduki³, katsuhiko shirasawa³, hidetaka takato³ (1.Fukushima Tech. Ctr., 2.Tosei EB Tohoku Co.,Ltd., 3.Fukushima Renewable Energy Institute, AIST)

2:15 PM - 2:30 PM

△ [16p-A24-5] Laser Drilling of Mono-crystalline Silicon Wafers for Photovoltaic Cell

〇Tsubasa Kobayashi¹, Hiromichi Ono¹, Yoshiyuki Sanpei¹, Hitoshi Ohno², Yasufumi Takashima³, Tatsuhiro Shibukawa⁴, Masanori Ikeda⁵, Toshimitsu Mochizuki⁶, Yasuhiro Kida⁶, Katsuhiko Shirasawa⁶, Hidetaka Takato⁶ (1.Fukushima Technology Centre, 2.Yokohama Sekiei Co., Ltd., 3.Tosei EB Tohoku Co., Ltd., 4.Tohoku Denshi Co., Ltd., 5.Nihon Univ., 6.Fukushima Renewable Energy Institute,AIST)

2:45 PM - 3:00 PM

[16p-A24-6] Surface morphology of light trapping structure using a Ge dot mask grown by solid source MBE for crystalline Si solar cells

〇(M1)Atsushi Hombe¹, Yasuyoshi Kurokawa¹, Dmitrij Yuasov², Alexey Novikov², Noritaka Usami¹ (1.Nagoya Univ., 2.IPM RAS)

3:00 PM - 3:15 PM

[16p-A24-7] Passivation of nanocrystalline Si layer/Si structure by use of phosphosilicate glass

〇Kentaro Imamura^1,2, Yuya Onitsuka^1,2, Daichi Irishika^1,2, Hikaru Kobayashi^1,2 (1.ISIR, Osaka Univ., 2.CREST-JST)

3:15 PM - 3:30 PM

[16p-A24-8] Evaluation of SiN_x-Si Interface using a Laser Terahertz Emission Microscope (LTEM)

〇Akira Ito¹, Toshimitsu Mochizuki³, Yasuhiro Takase¹, Hidetoshi Nakanishi¹, Katsuto Tanahashi³, Jonathon Mitchell³, Iwao Kawayama², Masayoshi Tonouchi², Katsuhiko Shirasawa³, Hidetaka Takato³ (1.SCREEN, 2.ILE Osaka Univ., 3.FREA, AiST)

3:30 PM - 3:45 PM

△ [16p-A24-9] Annealing Effect of Si-rich-SiN for High Efficiency Solar Cells Having Nanoimprinted-Texture Structure

〇(D)Seiya Yoshinaga¹, Yasuaki Ishikawa¹, Yunjiang Jiang¹, Yukiharu Uraoka¹ (1.NAIST)

3:45 PM - 4:00 PM

△ [16p-A24-10] Removal of SiN with blue laser and electrical properties of Cu-electrode solar cells

〇(M1)Masaaki Saiga¹, Daisuke Ando¹, Yuji Sutou¹, Junichi Koike¹, Junki Sakamoto², Masaya Suwa², Koji Tojo², Yasuhiro Yamakage² (1.Tohoku Univ., 2.Shimadzu Corp.)

4:00 PM - 4:15 PM

△ [16p-A24-11] Optimization of process conditions for silicon solar cells with Cu lines

〇(M1)Yuki Aoyama¹, Daisuke Ando¹, Yuji Sutou¹, Junichi Koike¹ (1.Tohoku Univ.)

Session information

[16p-A24-1~11] 16.3 Bulk, thin-film and other silicon-based solar cells

[16p-A24-1] Crystalline silicon solar cell with high efficiency by ion implantation processes

[16p-A24-2] Quantitative measurement of the dopant concentration distribution in P-implanted emitter of single crystalline silicon solar cell using scanning nonlinear dielectric microscopy

▲ [16p-A24-3] Front Side Improvement for n-PERT Solar Cell by Removing the Boron-depleted Region

[16p-A24-4] Isolation of Mono-crystalline Silicon Wafer for photovoltaic Cell

△ [16p-A24-5] Laser Drilling of Mono-crystalline Silicon Wafers for Photovoltaic Cell

[16p-A24-6] Surface morphology of light trapping structure using a Ge dot mask grown by solid source MBE for crystalline Si solar cells

[16p-A24-7] Passivation of nanocrystalline Si layer/Si structure by use of phosphosilicate glass

[16p-A24-8] Evaluation of SiN_x-Si Interface using a Laser Terahertz Emission Microscope (LTEM)

△ [16p-A24-9] Annealing Effect of Si-rich-SiN for High Efficiency Solar Cells Having Nanoimprinted-Texture Structure

△ [16p-A24-10] Removal of SiN with blue laser and electrical properties of Cu-electrode solar cells

△ [16p-A24-11] Optimization of process conditions for silicon solar cells with Cu lines

Authentication

Session information

[16p-A24-1~11] 16.3 Bulk, thin-film and other silicon-based solar cells

[16p-A24-1] Crystalline silicon solar cell with high efficiency by ion implantation processes

[16p-A24-2] Quantitative measurement of the dopant concentration distribution in P-implanted emitter of single crystalline silicon solar cell using scanning nonlinear dielectric microscopy

▲ [16p-A24-3] Front Side Improvement for n-PERT Solar Cell by Removing the Boron-depleted Region

[16p-A24-4] Isolation of Mono-crystalline Silicon Wafer for photovoltaic Cell

△ [16p-A24-5] Laser Drilling of Mono-crystalline Silicon Wafers for Photovoltaic Cell

[16p-A24-6] Surface morphology of light trapping structure using a Ge dot mask grown by solid source MBE for crystalline Si solar cells

[16p-A24-7] Passivation of nanocrystalline Si layer/Si structure by use of phosphosilicate glass

[16p-A24-8] Evaluation of SiNx-Si Interface using a Laser Terahertz Emission Microscope (LTEM)

△ [16p-A24-9] Annealing Effect of Si-rich-SiN for High Efficiency Solar Cells Having Nanoimprinted-Texture Structure

△ [16p-A24-10] Removal of SiN with blue laser and electrical properties of Cu-electrode solar cells

△ [16p-A24-11] Optimization of process conditions for silicon solar cells with Cu lines

Authentication

[16p-A24-8] Evaluation of SiN_x-Si Interface using a Laser Terahertz Emission Microscope (LTEM)