Oral presentation

12 Organic Molecules and Bioelectronics » 12.4 Organic light-emitting devices and organic transistors

[6p-A203-1~19] 12.4 Organic light-emitting devices and organic transistors

Wed. Sep 6, 2017 1:15 PM - 6:30 PM A203 (203)

Yutaka Noguchi(Meiji Univ.), Toshinori Matsushima(Kyushu Univ.), Masahiro Misaki(Kindai Univ. Tech. Col.)

△：奨励賞エントリー
▲：英語発表
▼：奨励賞エントリーかつ英語発表
空欄：どちらもなし

+Add all to schedule

1:15 PM - 1:30 PM

[6p-A203-1] Interface states between metal oxide and polyethyleneimine for inverted organic light-emitting diodes studied by noise spectroscopy

〇Takahiro Mayumi¹, Makoto Takada¹, Katsuyuki Morii², Takashi Nagase^1,3, Takashi Kobayashi^1,3, Hiroyoshi Naito^1,3 (1.Osaka Pref Univ., 2.Nippon Shokubai CO., LTD., 3.RIMED)

1:30 PM - 1:45 PM

△ [6p-A203-2] Development of host materials suitable for demonstrating highly efficient and stable inverted OLED

〇Shizuka Kawamura¹, Takahisa Shimizu², Hirohiko Fukagawa^1,2 (1.Tokyo Univ. Science, 2.NHK Sci. & Res. Labs.)

1:45 PM - 2:00 PM

△ [6p-A203-3] Characterization of organic light-emitting diodes by displacement current measurement: Interaction between polarization charge and injected charge

〇Takahiro Makino¹, Yuya Tanaka^1,2, Hisao Ishii^1,2,3 (1.AIS Chiba Univ., 2.CFS Chiba Univ., 3.MCRC Chiba Univ.)

2:00 PM - 2:15 PM

△ [6p-A203-4] Analysis of carrier behavior in dye-doped OLED by time-of-light measurement.

〇Naoya Otani¹, Yuya Tanaka^1,2, Hisao Ishii^1,2,3 (1.AIS, Chiba Univ., 2.CFS, Chiba Univ., 3.MCRC, Chiba Univ.)

2:15 PM - 2:30 PM

△ [6p-A203-5] Enhancement of electrical properties and air stability in high-density amorphous films

〇(D)Yu Esaki¹, Takeshi Komino^1,2, Toshinori Matsushima^1,2, Chihaya Adachi^1,2 (1.OPERA, Kyushu Univ., 2.JST ERATO)

2:30 PM - 2:45 PM

△ [6p-A203-6] Deposition rate dependence and dynamics of molecular orientation of OLED materials

〇Yoshihito Sukegawa¹, Mizuka Fukuda¹, Yoshiya Sakai¹, Daisuke Yokoyama^1,2 (1.Dep. Org. Mater. Sci., Yamagata Univ., 2.ROEL, Yamagata Univ.)

3:00 PM - 3:15 PM

▼ [6p-A203-7] Single-crystal MAPbBr₃ based flexible light-emitting diodes prepared by cast-capping method

〇(DC)Cao Van Nguyen¹, Hiroyuki Katsuki¹, Fumio Sasaki², Hisao Yanagi¹ (1.NAIST, 2.AIST)

3:15 PM - 3:30 PM

△ [6p-A203-8] Improved Efficiency of Light-Emitting Diodes Using InP/ZnSe/ZnS Quantum Dots and Mg-Doped Zinc Oxide Electron Transport Layer

〇Hironao Sasaki¹, Takeshi Fukuda¹, Norihiko Kamata¹, Zentaro Honda¹ (1.Saitama Univ.)

3:30 PM - 3:45 PM

△ [6p-A203-9] Development of highly efficient green OLED with high color purity

〇TAKU OONO¹, YUKIKO IWASAKI¹, TAKAHISA SHIMIZU¹, HIROHIKO FUKAGAWA¹ (1.NHK STRL)

3:45 PM - 4:00 PM

△ [6p-A203-10] Reduced phosphomolybdic acid hole injection materials for solution-processed organic light-emitting devices toward room temperature processing

〇Kohei Endo¹, Satoru Ohisa^1,2,3, Kosuke Kasuga¹, Yong-Jin Pu^1,2,3, Takayuki Chiba^1,2,3, Junji Kido^1,2,3 (1.Grad. Schl. of Org. Mater. Sci., Yamagata Univ., 2.ROEL, Yamagata Univ., 3.FROM, Yamagata Univ.)

4:00 PM - 4:15 PM

△ [6p-A203-11] High outcoupling OLEDs with super-low-index organic hole transport layers

〇Tatsuki Sasaki¹, Yasutaka Suzuki¹, Takefumi Abe², Kaori Tsuruoka², Yasuhiro Kuwana², Yutaka Noguchi³, Daisuke Yokoyama^1,4 (1.Dep. Org. Mater. Sci., Yamagata Univ., 2.Asahi Glass Co., Ltd., 3.Meiji Univ., 4.ROEL, Yamagata Univ.)

4:15 PM - 4:30 PM

[6p-A203-12] High Efficiency Organic Light-Emitting Electrochemical Cells with Corrugated Substrates

〇Soichi Uchida¹, Shigetara Toriyama¹, Suzushi Nishimura¹, Kan Sato², Kenichi Oyaizu², Hiroyuki Nishide², Yoshinori Nishikitani² (1.JXTG Oil & Energy, 2.Waseda Univ.)

4:45 PM - 5:00 PM

[6p-A203-13] New TADF Design with Coplanar Structures and Their Optoelectronic Properties

〇Youichi Tsuchiya^1,2, Yuma Ishikawa¹, Xiankai Chen³, Jean-Luc Bredas³, Chihaya Adachi^1,2,4 (1.Kyushu Univ., 2.JST ERATO, 3.Georgia Tech, 4.WPI-I2CNER)

5:00 PM - 5:15 PM

[6p-A203-14] A Series of Terpyridine-based Electron-Transport Materials for Highly Efficient Thermally Activated Delayed Fluorescent Organic Light-Emitting Devices

〇Yuichiro Watanabe¹, Ryo Yoshioka¹, Hisahiro Sasabe^1,2, Daisuke Yokoyama^1,2, Junji Kido^1,2,3 (1.Yamagata Univ., 2.ROEL, 3.FROM)

5:15 PM - 5:30 PM

[6p-A203-15] Solvent polarity dependence of relaxation rate constants in 4CzIPN

〇Akitsugu Niwa¹, Daisuke Kawate¹, Takashi Kobayashi^1,2, Takashi Nagase^1,2, Kenichi Goushi^3,4, Chihaya Adachi^3,4, Hiroyoshi Naito^1,2 (1.Osaka Pref. Univ., 2.RIMED, 3.OPERA, Kyushu Univ., 4.JST-ERATO)

5:30 PM - 5:45 PM

[6p-A203-16] Applications of lithium-bipyridilphenolate complexes with terminal pyridines substituted at different positions to organic light-emitting devices.

〇Satoru Ohisa^1,2,3, Taichiro Karasawa¹, Yuichiro Watanabe¹, Tatsuya Ohsawa¹, Yong-Jin Pu^1,2,3, Hisahiro Sasabe^1,2,3, Junji Kido^1,2,3 (1.Yamagata Univ., 2.ROEL, Yamagata Univ., 3.FROM, Yamagata Univ.)

5:45 PM - 6:00 PM

[6p-A203-17] Phthalimide-based new electron transport materials for OLEDs

〇Satoshi Kubota¹, Musubu Ichikawa¹, Kazunori Togashi², Hideyoshi Kitahara², Norimasa Yokoyama² (1.Shinshu Univ., 2.Hodogaya Chemical)

6:00 PM - 6:15 PM

[6p-A203-18] Influence of material impurities in hole-blocking layer on OLED degradation

〇Hiroshi Fujimoto^1,2, Ko Inada², Satoshi Yukiwaki¹, Keiko Kusuhara², Nozomi Nakamura², Masayuki Yahiro^1,2,3, Chihaya Adachi^1,2,3 (1.i3-OPERA, 2.Opera Kyushu Univ., 3.ISIT)

6:15 PM - 6:30 PM

[6p-A203-19] Carrier traps and degradation analysis of organic light-emitting diodes using thermally activated delayed florescence emitter by thermally stimulated current measurement

〇Masayuki Yahiro¹, Yuko Tsutsui¹, Takashi Fujihara¹, Tetsuo Tsutsui², Chihaya Adachi³ (1.ISIT, 2.CEREBA, 3.OPERA, Kyushu Univ.)

Session information

[6p-A203-1~19] 12.4 Organic light-emitting devices and organic transistors

[6p-A203-1] Interface states between metal oxide and polyethyleneimine for inverted organic light-emitting diodes studied by noise spectroscopy

△ [6p-A203-2] Development of host materials suitable for demonstrating highly efficient and stable inverted OLED

△ [6p-A203-3] Characterization of organic light-emitting diodes by displacement current measurement: Interaction between polarization charge and injected charge

△ [6p-A203-4] Analysis of carrier behavior in dye-doped OLED by time-of-light measurement.

△ [6p-A203-5] Enhancement of electrical properties and air stability in high-density amorphous films

△ [6p-A203-6] Deposition rate dependence and dynamics of molecular orientation of OLED materials

▼ [6p-A203-7] Single-crystal MAPbBr₃ based flexible light-emitting diodes prepared by cast-capping method

△ [6p-A203-8] Improved Efficiency of Light-Emitting Diodes Using InP/ZnSe/ZnS Quantum Dots and Mg-Doped Zinc Oxide Electron Transport Layer

△ [6p-A203-9] Development of highly efficient green OLED with high color purity

△ [6p-A203-10] Reduced phosphomolybdic acid hole injection materials for solution-processed organic light-emitting devices toward room temperature processing

△ [6p-A203-11] High outcoupling OLEDs with super-low-index organic hole transport layers

[6p-A203-12] High Efficiency Organic Light-Emitting Electrochemical Cells with Corrugated Substrates

[6p-A203-13] New TADF Design with Coplanar Structures and Their Optoelectronic Properties

[6p-A203-14] A Series of Terpyridine-based Electron-Transport Materials for Highly Efficient Thermally Activated Delayed Fluorescent Organic Light-Emitting Devices

[6p-A203-15] Solvent polarity dependence of relaxation rate constants in 4CzIPN

[6p-A203-16] Applications of lithium-bipyridilphenolate complexes with terminal pyridines substituted at different positions to organic light-emitting devices.

[6p-A203-17] Phthalimide-based new electron transport materials for OLEDs

[6p-A203-18] Influence of material impurities in hole-blocking layer on OLED degradation

[6p-A203-19] Carrier traps and degradation analysis of organic light-emitting diodes using thermally activated delayed florescence emitter by thermally stimulated current measurement

Authentication

Session information

[6p-A203-1~19] 12.4 Organic light-emitting devices and organic transistors

△ [6p-A203-2] Development of host materials suitable for demonstrating highly efficient and stable inverted OLED

△ [6p-A203-3] Characterization of organic light-emitting diodes by displacement current measurement: Interaction between polarization charge and injected charge

△ [6p-A203-4] Analysis of carrier behavior in dye-doped OLED by time-of-light measurement.

△ [6p-A203-5] Enhancement of electrical properties and air stability in high-density amorphous films

△ [6p-A203-6] Deposition rate dependence and dynamics of molecular orientation of OLED materials

▼ [6p-A203-7] Single-crystal MAPbBr3 based flexible light-emitting diodes prepared by cast-capping method

△ [6p-A203-8] Improved Efficiency of Light-Emitting Diodes Using InP/ZnSe/ZnS Quantum Dots and Mg-Doped Zinc Oxide Electron Transport Layer

△ [6p-A203-9] Development of highly efficient green OLED with high color purity

△ [6p-A203-10] Reduced phosphomolybdic acid hole injection materials for solution-processed organic light-emitting devices toward room temperature processing

△ [6p-A203-11] High outcoupling OLEDs with super-low-index organic hole transport layers

Authentication

▼ [6p-A203-7] Single-crystal MAPbBr₃ based flexible light-emitting diodes prepared by cast-capping method