Oral presentation

11 Superconductivity » 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[16p-318-1~16] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

Thu. Mar 16, 2017 1:15 PM - 5:30 PM 318 (318)

Shuhei Funaki(Shimane Univ.), Yusuke Ichino(Nagoya Univ.)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

1:15 PM - 1:30 PM

[16p-318-1] Fabrication of YBa₂Cu₃O₇ thin film via conductive Nb-doped SrTiO₃buffer layer
on textured Cu tape

〇(M1)Hiroki Maeda¹, Takeo Morimura¹, Katsutoshi Hirose¹, Kohta Yamaguchi¹, Shigeru Horii^1,2, Toshiya Doi^1,2, Ataru Ichinose^2,3 (1.Kyoto univ., 2.JST-ALCA, 3.CRIEPI)

1:30 PM - 1:45 PM

[16p-318-2] Fabrication of Conductive Buffer Layers for YBCO Coated Conductor Using Cube-Textured Cu Tape

〇(M1)Katsutoshi Hirose¹, Kota Yamaguchi¹, Hiroki Maeda¹, Takeo Morimura¹, Shigeru Horii^1,2, Toshiya Doi^1,2, Ataru Ichinose^2,3 (1.Kyoto Univ., 2.JST-ALCA, 3.CRIEPI)

1:45 PM - 2:00 PM

[16p-318-3] Fabrication of oxide buffer layers and YBCO thin film on textured silicon steel tape

〇(M1)Tomo Tadokoro¹, Kohei Kitamura¹, Shigeru Horii^1,2, Toshiya Doi^1,2, Ataru Ichinose^2,3 (1.Kyoto Univ., 2.JST-ALCA, 3.CRIEPI)

2:00 PM - 2:15 PM

△ [16p-318-4] Introduction of Sm₂BaCuO₅ as Artificial Pinning Centers into SmBa₂Cu₃O_y Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

〇Shuya Tajiri¹, Yusuke Ichino¹, Yuji Tsuchiya¹, Yutaka Yoshida¹ (1.Nagoya Univ.)

2:15 PM - 2:30 PM

△ [16p-318-5] Introduction of BaTbO₃ into SmBa₂Cu₃O_y Superconducting Films as a Novel Nanorod Material

〇Yuji Tsuchiya¹, Qianyu Xu¹, Yusuke Ichino¹, Ataru Ichinose², Yutaka Yoshida¹ (1.Nagoya Univ., 2.CRIEPI)

2:30 PM - 2:45 PM

△ [16p-318-6] Superconducting Properties in BaHfO₃-doped SmBa₂Cu₃O_y Coated Conductor with Multi-layered Hybrid Artificial Pinning Centers

〇Keisuke Suzuki¹, Tsuchiya Yuji¹, Ichino Yusuke¹, Izumi Teruo², Yoshida Yutaka¹ (1.Nagoya Univ., 2.AIST)

2:45 PM - 3:00 PM

[16p-318-7] Influence of nanorod density and diameter on vortex pinning in YBCO nanocomposite films

〇Tomoya Horide¹, Naoki Matsukida¹, Manabu Ishimaru¹, Kaname Matsumoto¹, Ryusuke Kita², Satoshi Awaji³ (1.Kyushu Inst. Technol., 2.Shizuoka Univ., 3.Tohoku Univ.)

3:15 PM - 3:30 PM

△ [16p-318-8] Effect of oxygen annealing temperature on carrier density and in-field properties for
TFA-MOD REBCO coated conductors

〇Koki Agatsuma¹, Michio Sato¹, Masashi Miura¹, Akira Ibi², Koichi Nakaoka², Teruo Izumi² (1.Seikei Univ., 2.AIST)

3:30 PM - 3:45 PM

△ [16p-318-9] Influence of the intermediate heat treatment on the in-field critical current density for TFA-MOD(Y,Gd)BCO CCs

〇(M1)Tomonori Murakami¹, Michio Sato¹, Masashi Miura¹, Akira Ibi², Kouichi Nakaoka², Teruo Izumi² (1.Seikei Univ., 2.AIST)

3:45 PM - 4:00 PM

△ [16p-318-10] Various effects of oxyhalide for fluorine-free MOD processed YBCO films

〇Takanori Motoki^1,4, Shuhei Ikeda¹, Shin-ichi Nakamura¹, Genki Honda², Tatsuoki Nagaishi², Toshiya Doi^3,4, Jun-ichi Shimoyama^1,4 (1.Aoyama-Gakuin Univ., 2.Sumitomo Electric Industries, Ltd., 3.Kyoto Univ., 4.JST-ALCA)

4:00 PM - 4:15 PM

△ [16p-318-11] Influence of BaZrO₃ nanoparticle on irreversibility line for BaFe₂(As_0.66P_0.33)₂ films

〇Akinori Okubo¹, Michio Sato¹, Masashi Miura¹, Keichi Tanabe² (1.Seikei Univ., 2.SUSTERA)

4:15 PM - 4:30 PM

[16p-318-12] Flux pinning properties of FeSe_0.5Te_0.5 thin films irradiated with low-energy proton

〇Toshinori Ozaki¹, Qiang Li² (1.Kwansei Gakuin Univ., 2.Brookhaven National Lab.)

4:30 PM - 4:45 PM

△ [16p-318-13] Influence of channel states on field-induced superconductivity in insulating FeSe films

〇Kota Hanzawa¹, Hidenori Hiramatsu^1,2, Toshio Kamiya^1,2, Hideo Hosono^1,2 (1.MSL, Tokyo Tech, 2.MCES, Tokyo Tech)

4:45 PM - 5:00 PM

[16p-318-14] Fabrication of ultra-thin films and progress of EDLT on MgB₂ and Sm-1111

〇Masahito Sakoda¹, Motoyuki Kikuchi¹, Sho Nakajima¹, Kenji Takinaka¹, Akihiro Ishii¹, Michio Naito¹ (1.TUAT)

5:00 PM - 5:15 PM

[16p-318-15] Relationship between deposition condisions and superconducting properties in MgB₂ thin films grown on Cu tapes

〇Hitoshi Takahata¹, Yutaro Shimoda¹, Junya Demise¹, Shigeru Horii¹, Toshiya Doi¹, Toshiaki Kusunoki², Ataru Ichinose³ (1.Kyoto Univ., 2.Hitach Ltd., 3.CRIEPI)

5:15 PM - 5:30 PM

[16p-318-16] Synthesis of the ternary nitride, CaNiN, by molecular beam epitaxy

〇Hayato Inaba¹ (1.TUAT)

Session information

[16p-318-1~16] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[16p-318-1] Fabrication of YBa₂Cu₃O₇ thin film via conductive Nb-doped SrTiO₃buffer layer
on textured Cu tape

[16p-318-2] Fabrication of Conductive Buffer Layers for YBCO Coated Conductor Using Cube-Textured Cu Tape

[16p-318-3] Fabrication of oxide buffer layers and YBCO thin film on textured silicon steel tape

△ [16p-318-4] Introduction of Sm₂BaCuO₅ as Artificial Pinning Centers into SmBa₂Cu₃O_y Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

△ [16p-318-5] Introduction of BaTbO₃ into SmBa₂Cu₃O_y Superconducting Films as a Novel Nanorod Material

△ [16p-318-6] Superconducting Properties in BaHfO₃-doped SmBa₂Cu₃O_y Coated Conductor with Multi-layered Hybrid Artificial Pinning Centers

[16p-318-7] Influence of nanorod density and diameter on vortex pinning in YBCO nanocomposite films

△ [16p-318-8] Effect of oxygen annealing temperature on carrier density and in-field properties for
TFA-MOD REBCO coated conductors

△ [16p-318-9] Influence of the intermediate heat treatment on the in-field critical current density for TFA-MOD(Y,Gd)BCO CCs

△ [16p-318-10] Various effects of oxyhalide for fluorine-free MOD processed YBCO films

△ [16p-318-11] Influence of BaZrO₃ nanoparticle on irreversibility line for BaFe₂(As_0.66P_0.33)₂ films

[16p-318-12] Flux pinning properties of FeSe_0.5Te_0.5 thin films irradiated with low-energy proton

△ [16p-318-13] Influence of channel states on field-induced superconductivity in insulating FeSe films

[16p-318-14] Fabrication of ultra-thin films and progress of EDLT on MgB₂ and Sm-1111

[16p-318-15] Relationship between deposition condisions and superconducting properties in MgB₂ thin films grown on Cu tapes

[16p-318-16] Synthesis of the ternary nitride, CaNiN, by molecular beam epitaxy

Authentication

Session information

[16p-318-1~16] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

△ [16p-318-4] Introduction of Sm2BaCuO5 as Artificial Pinning Centers into SmBa2Cu3Oy Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

△ [16p-318-5] Introduction of BaTbO3 into SmBa2Cu3Oy Superconducting Films as a Novel Nanorod Material

△ [16p-318-6] Superconducting Properties in BaHfO3-doped SmBa2Cu3Oy Coated Conductor with Multi-layered Hybrid Artificial Pinning Centers

△ [16p-318-8] Effect of oxygen annealing temperature on carrier density and in-field properties forTFA-MOD REBCO coated conductors

△ [16p-318-9] Influence of the intermediate heat treatment on the in-field critical current density for TFA-MOD(Y,Gd)BCO CCs

△ [16p-318-10] Various effects of oxyhalide for fluorine-free MOD processed YBCO films

△ [16p-318-11] Influence of BaZrO3 nanoparticle on irreversibility line for BaFe2(As0.66P0.33)2 films

△ [16p-318-13] Influence of channel states on field-induced superconductivity in insulating FeSe films

Authentication

△ [16p-318-4] Introduction of Sm₂BaCuO₅ as Artificial Pinning Centers into SmBa₂Cu₃O_y Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

△ [16p-318-5] Introduction of BaTbO₃ into SmBa₂Cu₃O_y Superconducting Films as a Novel Nanorod Material

△ [16p-318-6] Superconducting Properties in BaHfO₃-doped SmBa₂Cu₃O_y Coated Conductor with Multi-layered Hybrid Artificial Pinning Centers

△ [16p-318-8] Effect of oxygen annealing temperature on carrier density and in-field properties for
TFA-MOD REBCO coated conductors

△ [16p-318-11] Influence of BaZrO₃ nanoparticle on irreversibility line for BaFe₂(As_0.66P_0.33)₂ films