Oral presentation

16 Amorphous and Microcrystalline Materials » 16.3 Bulk, thin-film and other silicon-based solar cells

[18p-D101-1~17] 16.3 Bulk, thin-film and other silicon-based solar cells

Sun. Mar 18, 2018 1:15 PM - 6:00 PM D101 (56-101)

Koji Arafune(Univ. of Hyogo), Fumitaka Ohashi(Gifu Univ.), Chikao Okamoto(Sharp)

△：奨励賞エントリー
▲：英語発表
▼：奨励賞エントリーかつ英語発表
空欄：どちらもなし

+Add all to schedule

1:15 PM - 1:30 PM

[18p-D101-1] Optimization of Detection of Dislocation Clusters in the Photoluminescence Image by Image Processing

〇Kazuya Tajima¹, Yusuke Hayama¹, Tetsuro Muramatsu¹, Kentaro Kutsukake², Tetsuya matsumoto³, Hiroaki Kudo³, Noritaka Usami¹ (1.Graduate School of Engineering, Nagoya University, 2.Institutes of Innovation for Future Society, Nagoya University, 3.Graduate School of Informatics, Nagoya University)

1:30 PM - 1:45 PM

△ [18p-D101-2] Effect of Oxygen Precipitation on Metal Gettering in Cz-Si for Photovoltaic

〇(B)Kouhei Onishi¹, Takuto Kojima¹, Kousuke Kinoshita¹, Yoshio Ohshita², Atsushi Ogura¹ (1.Meiji Univ, 2.Toyota Tech. Inst)

1:45 PM - 2:00 PM

△ [18p-D101-3] Effects of Crystal Growth Conditions of n-type Cz-Si on Oxygen Precipitation through Annealing Process Evaluated by IR Light Scattering Tomography

〇(M1)Kousuke Kinoshita¹, Takuto Kojima¹, Yoshio Ohshita², Atsushi Ogura¹ (1.Meiji University, 2.Toyota Tech. Inst.)

2:00 PM - 2:15 PM

[18p-D101-4] Structural bistability in Σ9{111}/{115} asymmetric grain boundary in silicon

〇Yutaka Ohno¹, Yasuo Shimizu¹, Yasuyoshi Nagai¹, Kentaro Kutsukake¹, Hideto Yoshida², Seiji Takeda², Yokoi Tatsuya³, Atsutomo Nakamura³, Katsushi Matsunaga³ (1.IMR, Tohoku Univ., 2.ISIR, Osaka Univ., 3.GSE, Nagoya Univ.)

2:15 PM - 2:30 PM

[18p-D101-5] Interaction of Na atoms with stacking faults in Si crystals with different doping levels

〇Yutaka Ohno¹, Haruhiko Morito¹, Kentaro Kutsukake¹, Ichiro Yonenaga¹, Tatsuya Yokoi², Atsutomo Nakamura², Katsushi Matsunaga² (1.IMR, Tohoku Univ., 2.GSE, Nagoya Univ.)

2:30 PM - 2:45 PM

▲ [18p-D101-6] The impact of saw mark direction and diamond wire diameter on the fracture strength
of thin (120 and 140 µm) Si wafers

〇(P)Halubai Sekhar¹, Fukuda Tetsuo¹, Tanahashi Katsuto¹, Shirasawa Katsuhiko¹, Takato Hidetaka¹, Ohkubo Kazuya² (1.Fukushima Renewable Energy Institute, AIST, 2.Noritake Company Limited, Fukuoka)

3:00 PM - 3:15 PM

[18p-D101-7] Temperature Dependence Measurements of Interdigitated Back Contact, Passivated Emitter and Rear Cell, and Silicon Heterojunction Photovoltaic Modules

〇Shigeomi Hara¹, Jaffar Abdu¹, Sungwoo Choi², Yasuo Chiba², Atsushi Masuda², Makoto Kasu^1,2 (1.Saga Univ., 2.AIST)

3:15 PM - 3:30 PM

[18p-D101-8] Comparison between Actual and Estimated Power Generation Amounts of Photovoltaic Modules at Tosu City

〇Yasuo Chiba¹, Sungwoo Choi¹, Ritsuko Sato¹, Tetsuyuki Ishii², Atsushi Masuda¹ (1.AIST, 2.CRIEPI)

3:30 PM - 3:45 PM

[18p-D101-9] Change in initial performance of PV modules composed of high-efficiency crystalline Si solar cells connected to an electric power distribution grid

〇Tetsuyuki Ishii¹, Sungwoo Choi², Ritsuko Sato², Yasuo Chiba², Atsushi Masuda² (1.CRIEPI, 2.AIST)

3:45 PM - 4:00 PM

[18p-D101-10] Degradation Mode Analysis of Crystalline Si PV Modules on Pressure Cooker Tests and Dynamic Mechanical Load Tests

〇Yuji Ino¹, Shuichi Asao¹, Katsuhiko Shirasawa¹, Hidetaka Takato¹ (1.FREA, AIST)

4:00 PM - 4:15 PM

[18p-D101-11] Influence of Environmental Stress Factors Including Ultraviolet Irradiation on Photovoltaic Module Degradation

〇Tomoko Aoki¹, Yukiko Hara¹, Atsushi Masuda¹ (1.National Institute of Advanced Industrial Science and Technology)

4:15 PM - 4:30 PM

[18p-D101-12] Detection of acetic acid in photovoltaic module by tin film sensor
during combined acceleration test

〇(M1)Ryo Hamaoka¹, Satoru Takemoto¹, Kentaro Iwami¹, Yukiko Hara², Chizuko Yamamoto², Atsushi Masuda², Norihiro Umeda¹ (1.TUAT, 2.AIST)

4:45 PM - 5:00 PM

[18p-D101-13] Localization and Characterization of Degraded Front-Contact in c-Si PV Cells / Modules Exposed to Hygrothermal Stress Conditions

〇Tadanori Tanahashi¹, Norihiko Sakamoto¹, Hajime Shibata¹, Atsushi Masuda¹ (1.AIST)

5:00 PM - 5:15 PM

[18p-D101-14] Corrosion of the Glass and Formation of the Lead Compounds in the Metallization by High-Temperature High-Humidity Test on Crystalline Silicon Solar Cells

〇Taeko Semba¹, Takeo Shimada¹, Kazuyoshi Yamada¹, Katsuhiko Shirasawa², Hidetaka Takato² (1.Namics, 2.AIST)

5:15 PM - 5:30 PM

[18p-D101-15] Study on potential induced degradation of p-type c-Si photovoltaic modules

〇Hiroki Yoshida¹, Fumitaka Ohashi¹, Yukiko Hara², Sachiko Jonai², Atsushi Masuda^2,1, Shuichi Nonomura¹ (1.Gifu Univ., 2.AIST)

5:30 PM - 5:45 PM

[18p-D101-16] Outdoor PID acceleration test for p-type crystalline Si photovoltaic modules under different light irradiation conditions

〇Yasushi Tachibana¹, Takeshi Toyoda¹, Toshiharu Minamikawa¹, Kinichi Ogawa², Yukiko Hara², Keiichiro Sakurai², Atsushi Masuda² (1.IRII, 2.AIST)

5:45 PM - 6:00 PM

[18p-D101-17] Effect of evacuating the chamber in a cell-level PID test on the degradation behavior of solar cells

〇Seira Yamaguchi¹, Keisuke Ohdaira¹ (1.JAIST)

Session information

[18p-D101-1~17] 16.3 Bulk, thin-film and other silicon-based solar cells

[18p-D101-1] Optimization of Detection of Dislocation Clusters in the Photoluminescence Image by Image Processing

△ [18p-D101-2] Effect of Oxygen Precipitation on Metal Gettering in Cz-Si for Photovoltaic

△ [18p-D101-3] Effects of Crystal Growth Conditions of n-type Cz-Si on Oxygen Precipitation through Annealing Process Evaluated by IR Light Scattering Tomography

[18p-D101-4] Structural bistability in Σ9{111}/{115} asymmetric grain boundary in silicon

[18p-D101-5] Interaction of Na atoms with stacking faults in Si crystals with different doping levels

▲ [18p-D101-6] The impact of saw mark direction and diamond wire diameter on the fracture strength
of thin (120 and 140 µm) Si wafers

[18p-D101-7] Temperature Dependence Measurements of Interdigitated Back Contact, Passivated Emitter and Rear Cell, and Silicon Heterojunction Photovoltaic Modules

[18p-D101-8] Comparison between Actual and Estimated Power Generation Amounts of Photovoltaic Modules at Tosu City

[18p-D101-9] Change in initial performance of PV modules composed of high-efficiency crystalline Si solar cells connected to an electric power distribution grid

[18p-D101-10] Degradation Mode Analysis of Crystalline Si PV Modules on Pressure Cooker Tests and Dynamic Mechanical Load Tests

[18p-D101-11] Influence of Environmental Stress Factors Including Ultraviolet Irradiation on Photovoltaic Module Degradation

[18p-D101-12] Detection of acetic acid in photovoltaic module by tin film sensor
during combined acceleration test

[18p-D101-13] Localization and Characterization of Degraded Front-Contact in c-Si PV Cells / Modules Exposed to Hygrothermal Stress Conditions

[18p-D101-14] Corrosion of the Glass and Formation of the Lead Compounds in the Metallization by High-Temperature High-Humidity Test on Crystalline Silicon Solar Cells

[18p-D101-15] Study on potential induced degradation of p-type c-Si photovoltaic modules

[18p-D101-16] Outdoor PID acceleration test for p-type crystalline Si photovoltaic modules under different light irradiation conditions

[18p-D101-17] Effect of evacuating the chamber in a cell-level PID test on the degradation behavior of solar cells

Authentication

Session information

[18p-D101-1~17] 16.3 Bulk, thin-film and other silicon-based solar cells

△ [18p-D101-2] Effect of Oxygen Precipitation on Metal Gettering in Cz-Si for Photovoltaic

△ [18p-D101-3] Effects of Crystal Growth Conditions of n-type Cz-Si on Oxygen Precipitation through Annealing Process Evaluated by IR Light Scattering Tomography

▲ [18p-D101-6] The impact of saw mark direction and diamond wire diameter on the fracture strengthof thin (120 and 140 µm) Si wafers

Authentication

▲ [18p-D101-6] The impact of saw mark direction and diamond wire diameter on the fracture strength
of thin (120 and 140 µm) Si wafers