Oral presentation

11 Superconductivity » 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[16p-D221-1~11] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

Thu. Mar 16, 2023 2:00 PM - 5:15 PM D221 (Building No. 11)

Toshinori Ozaki(Kwansei Gakuin Univ.), Yusuke Ichino(Aichi Inst. Tech.), Takanori Motoki(Aoyama Gakuin Univ.)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

2:00 PM - 2:15 PM

▲ [16p-D221-1] Observation of superconducting transition in MTO/STO heteroepitaxial multilayer films

〇Alok Kumar Jha¹, Kaname Matsumoto¹, Sota Fujimoto¹, Tomoya Horide¹, Masaki Mito¹, Ataru Ichinose² (1.Kyushu Instt. Tech., 2.CRIEPI)

2:15 PM - 2:30 PM

[16p-D221-2] Annealing effects on superconducting properties of as-grown MgB₂ thin films

Akira Yamasaki¹, Tatsuya Tashiro¹, Iwao Kawayama¹, 〇Toshiya Doi¹ (1.Kyoto Univ.)

2:30 PM - 2:45 PM

△ [16p-D221-3] Experimentally determined upper critical fields and magnetic anisotropies of H-substituted iron-based superconductor SmFeAsO

〇Kota Hanzawa¹, Jumpei Matsumoto¹, Soshi Iimura^2,3, Yoshimitsu Kohama⁴, Hidenori Hiramatsu^1,3, Hideo Hosono^2,3 (1.MSL, Tokyo Tech, 2.NIMS, 3.MDX RCES, Tokyo Tech, 4.ISSP, Tokyo Univ)

2:45 PM - 3:00 PM

△ [16p-D221-4] Hydrogenation process of NdFeAsO thin films covered with a metallic protection layer

〇(M1)Kenshin Sakurai¹, Hiroya Imanaka¹, Hiroto Hibino¹, Takahumi Hatano¹, Hiroshi Ikuta¹ (1.Nagoya Univ.)

3:15 PM - 3:30 PM

[16p-D221-5] Fabrication of Bi-2223 Superconducting Joint by Hot-Pressing Process

〇Yasuaki Takeda¹, Gen Nishijima¹, Kensuke Kobayashi^2,1, Hitoshi Kitaguchi¹ (1.NIMS, 2.RIKEN)

3:30 PM - 3:45 PM

[16p-D221-6] Effect of Superconducting properties of GdBa₂Cu₃O_y CCs irradiated with Au-ions on oxygen-annealing

〇Toshinori Ozaki¹, Hiroyuki Okazaki², Hiroshi Koshikawa², Shunya Yamamoto², Tetsuya Yamaki², Tetsuro Sueyoshi³, Hitoshi Sakane⁴ (1.Kwansei Gakuin Univ., 2.QST, 3.Kyushu Sangyo Univ., 4.SHI-ATEX Co., Ltd.)

3:45 PM - 4:00 PM

[16p-D221-7] Handling Microstructure Images for Data Driven Research

〇Ataru Ichinose¹, Keiichi Horio², Kaname Matsumoto², Yutaka Yoshida³, Yusuke Ichino⁴ (1.CRIEPI, 2.Kyushu Inst. of Technol., 3.Nagoya Univ., 4.Aichi Inst. of Technol.)

4:15 PM - 4:30 PM

[16p-D221-8] Plume height monitoring and in-situ height control using a depth camera

〇Shuntaro Yamazaki¹, Tomoki Osada¹, Yusuke Ichino², Yutaka Yoshida¹ (1.Nagoya Univ., 2.Aichi Inst. of Technol.)

4:30 PM - 4:45 PM

[16p-D221-9] Change in Laser Plume Image of YBCO Thin Films Prepared by PLD Method with Respect to Composition Change

〇Shuntaro Yamazaki¹, Tomoki Osada¹, Yusuke Ichino², Yutaka Yoshida¹ (1.Nagoya Univ., 2.Aichi Inst. of Technol.)

4:45 PM - 5:00 PM

[16p-D221-10] The simulation of BaMO₃-doped VLS-REBa₂Cu₃O_y coated condudtors and component segregation

〇Tomonori Arita¹, Yusuke Ichino², Yutaka Yoshida¹ (1.Nagoya Univ., 2.Aichi Inst. of Technol.)

5:00 PM - 5:15 PM

[16p-D221-11] Introduction of stacking faults in RE123 thin films by Ag coating and post annealing

〇Eisuke Osaki¹, Takanori Motoki¹, Miyako Kozawa¹, Shusei Sakai¹, Keigo Horiguchi¹, Shin-ichi Nakamura², Jun-ichi Shimoyama¹ (1.Aoyama Gakuin Univ, 2.TEP)

Session information