Special Issue: Research Advances in Sintering Technology and Sintering Mechanism of Powders

On-demand Video Distribution » Research Advances in Sintering Technology and Sintering Mechanism of Powders

Special Issue: Research Advances in Sintering Technology and Sintering Mechanism of Powders

Chairperson:Makoto KOBASHI (Nagoya University), Hiroyuki MUTO (Toyohashi University of Technology)

+Add all to schedule

[2-28A] Evaluation of Porosity in Gas-atomized Powder by Synchrotron X-ray CT and Investigation of the Effect of Gas Species.

〇Noriharu Yodoshi¹, Takahide Endo¹, Naoya Masahashi¹ (1.Institute for Materials Research, Tohoku University)

[2-29A] Formation Mechanism of Powder Particles Fabricated by Freeze-dry Pulsated Orifice Ejection Method

〇Zhenxing ZHOU¹, Yuta SEINO¹, Suxia GUO¹, Weiwei ZHOU¹, Naoyuki NOMURA¹ (1.TOHOKU University)

[2-30A] The influences of process parameters on the powder formation in plasma rotating electrode process (PREP)

〇Yujie Cui¹, Yufan Zhao¹, Haruko Numata², Kimio Wako³, Huakang Bian¹, Kenta Aoyagi¹, Kenta Yamanaka¹, Akihiko Chiba¹ (1.Institute for Materials Research, Tohoku University, 2.Graduate School of Engineering, Tohoku University, 3.JAMPT Corporation)

[2-31A] Impact of Al/Al interface with extremely reduced oxide layer in ultrafine grained Al compact prepared by low oxygen powder metallurgy process

〇Dasom KIM¹, Yusuke HIRAYAMA², Zheng LIU², Kenta TAKAGI², Hansang KWON³, Makoto KOBASHI¹ (1.Nagoya University, 2.National Institute of Advanced Industrial Science and Technology, 3.Pukyong National Univerisity)

※This presenter is a candidate for the Student Award for Outstanding Presentation.

[2-32A] In-situ observation and formation mechanism of wet granulation process by electrostatic attraction

〇Takuto Sunada¹, Masaki Nakamura¹, Atsusi Yokoi¹, Wai Kian Tan¹, Go Kawamura¹, Atsunori Matsuda¹, Hiroyuki Muto¹ (1.Toyohashi University of Technology)

※This presenter is a candidate for the Student Award for Outstanding Presentation.

Session information

Special Issue: Research Advances in Sintering Technology and Sintering Mechanism of Powders

[2-28A] Evaluation of Porosity in Gas-atomized Powder by Synchrotron X-ray CT and Investigation of the Effect of Gas Species.

[2-29A] Formation Mechanism of Powder Particles Fabricated by Freeze-dry Pulsated Orifice Ejection Method

[2-30A] The influences of process parameters on the powder formation in plasma rotating electrode process (PREP)

[2-31A] Impact of Al/Al interface with extremely reduced oxide layer in ultrafine grained Al compact prepared by low oxygen powder metallurgy process

[2-32A] In-situ observation and formation mechanism of wet granulation process by electrostatic attraction

Authentication