[B1-P303-01] Thermoelectric properties of Sr-substituted [Ca₂(Co_0.65Cu_0.35)₂O₄]_pCoO₂

*Yoshimi Shimizu¹, Kei Hayashi¹, Yuzuru Miyazaki¹ (1. Tohoku Univ. (Japan))

[B1-P303-02] Enhancing Thermoelectric Performance of SrTiO₃ with Strong Phonon Scattering by Hydride Anion Substitution

*Xinyi He¹, Seiya Nomoto¹, Takayoshi Katase¹, Terumasa Tadano², Toshio Kamiya¹ (1. MDX Research Center for Element Strategy, International Research Frontiers Initiative, Tokyo Tech (Japan), 2. Research Center for Magnetic and Spintronic Materials, National Institute for Materials Science (Japan))

[B1-P303-03] Development of a High Durability SiGe Thermoelectric Module without Electrode at the Hot Side

*Hironori Ohshima¹, Shinichi Fujimoto², Kazuo Nagase¹, Masayuki Murata¹, Atsushi Yamamoto¹, Chul-Ho Lee¹ (1. AIST (Japan), 2. KELK Ltd. (Japan))

[B1-P303-04] Effect Of Bi Off-Stoichiometry On The Thermoelectric Properties Of YbMg₂Bi_1.6±δSb_0.4

*Kushal Mehrotra¹, Andrei Novitskii², Takao Mori^2,1 (1. University of Tsukuba (Japan), 2. National Institute for Materials Science (Japan))

[B1-P303-05] Optimization Of Contact/Diffusion Barrier Materials For Mg₃(Sb, Bi)₂-Based Thermoelectric Compounds

*Muhammad Fasih Aamir^1,2, Raju Chetty¹, Jayachandran BABU¹, Takao Mori^1,2 (1. National Institute for Materials Science (NIMS), Tsukuba, Japan. (Japan), 2. University of Tsukuba, Tsukuba, Japan. (Japan))

[B1-P303-06] Development Of Rare Earth Free P-type Skutterudites For Thermoelectric Power Generation

*Krushna Raut^1,2, Andrei Novitskii¹, Cedric Bourges¹, Takao Mori^1,2 (1. National Institute for Materials Science (Japan), 2. University of Tsukuba (Japan))

[B1-P303-07] Study of a low-cost CrSi₂thermoelectric material for utilizing waste heat at mid-temperatures

*Anilkumar Bohra^1,2, Satish Vitta¹ (1. Department of Metallurgical Engineering and Materials Science, IIT Bombay, Mumbai 400076 (India), 2. Centre for Materials for Electronic Technology, Panchavati, Off. Pashan Road, Pune 411008 (India))

[B1-P303-08] Microstructure of CoSb₃-type Thermoelectric Printed Films for Different Ink Conditions

*Kosuke Watanabe¹, Hiroki Kojima², Krushna Kumari Raut³, Cédric Bourgès³, Takao Mori³, Koji Miyazaki^1,2 (1. Kyushu Univ. (Japan), 2. Kyushu Inst. Tech. (Japan), 3. Natl. Inst. Mater. Sci. (Japan))

[B1-P303-09] Process influence on digenite (Cu_1.8S) for enhancing its thermoelectric Performance

*Xinyuan Wang^1,2, Cédric Bourgès³, Takao Mori^1,2 (1. Int'l. Center for Materials Nanoarchitectonics (WPI-MANA), NIMS (Japan), 2. Graduate School of Pure and Applied Sci. Univ. of Tsukuba (Japan), 3. Int'l. Center for Young Scientists (ICYS), NIMS (Japan))

[B1-P303-10] Using Tight-binding Model to Understand How Alloying Modifies Materials' Thermoelectric Power Factor

*Wenhao Zhang^1,2, Jean-Francois Halet³, Takao Mori^1,2 (1. MANA, National Institute of Materials Science (Japan), 2. Univ. of Tsukuba (Japan), 3. CNRS-Saint-Gobain-NIMS, Link Lab, NIMS (Japan))

[B1-P303-11] Effect of Mg vacancies on thermoelectric properties of melt grown Mg₃Bi₂

*Hidetsugu Motoki¹, Shunya Sakane¹, Akito Ayukawa¹, Haruhiko Udono¹ (1. Ibaraki Univ. (Japan))

[B1-P303-12] Enhanced Seebeck effect of P3HT based on Felt fiber

*Tomoki Hijikata¹, Yousuke Ohira¹, Ryusei Komatsu¹, Yuki Sato¹, Hideki Arimatsu¹, Takuya Fujima¹ (1. Tokyo City Univ. (Japan))

講演取消

[B1-P303-13] Cancelled

[B1-P303-14] Thermoelectric Properties of Polymorph CaGe₂ – First Principles Study

*Ahmad Al Ghiffari¹, Rifky Syariati², Fumiyuki Ishii² (1. Graduate School of Natural Sci. and Tech., Kanazawa Univ. (Japan), 2. Nanomaterials Res. Inst. (NanoMaRi), Kanazawa Univ. (Japan))

[B1-P303-15] High thermoelectric figure-of-merit and ultra-low lattice thermal conductivity of new high-entropy-type AgBi(S, Se, Te)₂

*Asato Seshita¹, Aichi Yamashita¹, Takeshi Fujita², Akira Miura³, Takayoshi Katase⁴, Chikako Moriyoshi⁵, Yoshihiro Kuroiwa⁵, Yoshikazu MIzuguchi¹ (1. Tokyo Metropolitan Univ. (Japan), 2. Kouchi Univ. of Tech. (Japan), 3. Hokkaido Univ. (Japan), 4. Tokyo Inst. of Tech. (Japan), 5. Hiroshima Univ. (Japan))

[B1-P303-16] High Thermoelectric Performances Through The Development Of Complex Structures Of P-type Bi-Sb-Te Alloys Using The Combination Of High Energy Magnetic Pulse Compaction And Spark Plasma Sintering

*Eun-Ha Go¹, Madavali Babu, Rathinam Vasudevan, Min-Woo Shin, Gi-An Song, Jin-Kyu Lee, Soon-Jik Hong (1. Kongju National University and Center for Advanced Materials and Parts of Powders(CAMP2) (Korea))

[B1-P303-17] Fabrication and Performance of Monolithic Zn₄Sb₃ Thermoelectric Generator Modules

*Tachgiss Jampreecha^1,2, Anuchit Sawangprom^1,2, Santi Maensiri^1,2,3 (1. School of Physics, Institute of Science, Suranaree University of Technology (Thailand), 2. SUT CoE on Advanced Functional Materials (SUT-AFM), Suranaree University of Technology (Thailand), 3. Faculty of Mathematics and Natural Sciences, University of Malang, Malang (Indonesia))

[B1-P303-18] Upcycling Waste Silicon Solar Cells Into Thermoelectrics

*Jing Cao¹ (1. Institute of Materials Research and Engineering (Singapore))

[B1-P303-19] Thermoelectric properties of the Mn-doped Heusler alloy compounds Fe₂V_1-xMn_xAl

*Rajveer Jha¹, Naohito Tsujii¹, Takao Mori^1,2 (1. National Institute for Materials Science (Japan), 2. University of Tsukuba (Japan))

[B1-P303-20] Characterization of thermoelectric module with sulfide magnetic semiconductors

*Naohito Tsujii¹, Suresh Kumar Ramalingam¹, Takao Mori¹ (1. National Institute for Materials Science (Japan))

[B1-P303-21] Fabrication of n-type composite thin films of inorganic nanowires/conductive polymers and their thermoelectric properties.

*Haruna Kasugai¹, Shunichiro Miwa¹, Shunya Sakane^1,2, Hideki Tanaka¹ (1. Chuo Univ. (Japan), 2. Ibaraki Univ (Japan))

[B1-P303-22] Thermoelectric performance enhancement of PEDOT:PSS/Graphene multilayer thin films with intermolecular interactions

*Keito Uchida¹, Takashi Shimizu¹, Koki Saito¹, Shunya Sakane^1,2, Hideki Tanaka¹ (1. Chuo University (Japan), 2. Ibaraki University (Japan))

[B1-P303-23] Cr_1−xMo_xSi₂ thin film deposition using multi-target co-sputtering method

*Takashi Aizawa¹, Takao Mori^1,2 (1. National Inst. for Materials Sci. (Japan), 2. Univ. of Tsukuba (Japan))

[B1-P303-24] Alloying Behavior and Thermoelectric Properties of Nickel-based High Entropy Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering

*Akinori Oka¹, Atsuko Kosuga¹ (1. Osaka Metropolitan Univ. (Japan))

[B1-P303-25] Development of TCNQ and Fluorinated TCNQ Radical Anion Salts with Alkylated Organic Cations toward Thermoelectric Application

*Yoshiaki Nakano¹, Akikazu Nakai¹, Reo Masuda¹, Tsugumi Yano¹, Minoru Tsuiki¹, Yuri Ishikawa¹, Tomohiro Kohama¹, Takuhiro Sawada¹, Ibuki Yanase¹, Kakumi Yamada¹, Manabu Ishikawa¹, Akihiro Otsuka¹, Harukazu Yoshino² (1. Kyoto Univ. (Japan), 2. Osaka Metropolitan Univ. (Japan))

[B1-P303-26] Toward the Elucidation of the Origin of N-type Conduction in GeBi₄Te₇ Homologous-based Thermoelectric Materials

*Daiki Imai¹, Atsuko Kosuga¹ (1. Osaka Metropolitan Univ. (Japan))

[B1-P303-27] Thermoelectric properties of La_xSr_1-xCrO₃ with mixed-valent Cr-ions

Hiroya Sakurai¹, *Naohito Tsujii¹ (1. National Institute for Materials Science (Japan))

[B1-P303-28] Electronic and Magnetic Properties of CoSb₃, Mn-doped CoSb₃, and V-doped CoSb₃ Thin Films

*Kazuaki Kobayashi¹, Masato Shimono¹, Takao Mori¹ (1. National Institute for Materials Science (Japan))

[B1-P303-29] Effects of polymerization in high humidity environment on film deposition surface and thermoelectric performance in Vapor Phase Polymerization

*Ryusei Komatsu¹, Yuki Sato¹, Tomoki Hijikata¹, Yosuke Ohira¹, Takuya Fujima¹ (1. Tokyo City Univ. (Japan))

[B1-P303-30] Mechanical Properties Characterization of Thermoelectric Materials for Enhanced Reliability of Thermoelectric Devices

*Seungwoo Han^1,2, Seong-jae Jeon¹, Seungik SHIN², Da-hye Kim² (1. Korea Institute of Machinery and Materials (Korea), 2. University of science & technology (Korea))

[B1-P303-31] Thermoelectric Properties of Sb₂Te₃-based Ferecrystals based on Atomic Layer Deposition

*Kornelius Nielsch^1,2,3, Jun Yang¹, Dongho Shin¹, Sebastian Lehmann¹, Amin Bahrami¹ (1. Leibniz IFW Dresden (Germany), 2. Inst. of Applied Phys., Technical Univ. of Dresden (Germany), 3. Inst. of Materials Science, Technical Univ. of Dresden (Germany))

セッション情報

[B1-P303] Poster 303