Oral Session

[E3-O501] Oral 501

Fri. Dec 15, 2023 10:00 AM - 12:00 PM Session 1 (Room C-1)

Chair: Syuji Fujii (Osaka Institute of Technology), Yukiya Kitayama Kitayama (Osaka Metropolitan University)

+Add all to schedule

Opening Remark （10:00 AM - 10:05 AM）

10:05 AM - 10:35 AM

[E3-O501-01 (Symposium Invited)] Polyzwitterions on Electrified Surfaces

Chia-Hsuan Lin¹, Chia-Hsin Lin¹, Jhih-Guang Wu¹, *Shyh-Chyang Luo¹ (1. National Taiwan Univ. (Taiwan))

10:35 AM - 10:50 AM

[E3-O501-02] Monomeric sequence effect on hydrogel properties

*Hailong Fan¹, Jian Ping Gong¹ (1. Hokkaido Univerisity (Japan))

10:50 AM - 11:05 AM

[E3-O501-03] Non-close-packed arrangement of soft microparticles on solid substrates

*Yuma Sasaki¹, Seina Hiroshige¹, Masaya Takizawa¹, Yuichiro Nishizawa¹, Takayuki Uchihashi³, Haruka Minato¹, Daisuke Suzuki^1,2 (1. Grad. Sch. of Textile Sci. & Tech.,Shinshu Univ. (Japan), 2. RISM, Shinshu Univ. (Japan), 3. Grad. Sch. of Sci., Nagoya Univ. (Japan))

11:05 AM - 11:20 AM

[E3-O501-04] Adsorption races of binary microgels with different softness at the air/water interface during evaporation of sessile droplets

*Haruka Minato¹, Yuma Sasaki¹, Kenshiro Honda¹, Daisuke Suzuki¹ (1. Shinshu Univ. (Japan))

11:20 AM - 11:35 AM

[E3-O501-05] A Light-controllable Hydrogel based on GFP for Optical-control of Drug Release

*Nguyen Thi Yen¹, Namdoo Kim¹ (1. Kongju National Univ. (Korea))

11:35 AM - 11:50 AM

[E3-O501-06] Structure and property of hydrogels prepared with coordination
bond-induced end crosslinking

*Jungju Ryu¹, Daewon Sohn¹ (1. Hanyang Univ. (Korea))

Oral Session

[E3-O503] Oral 503

Fri. Dec 15, 2023 4:30 PM - 6:30 PM Session 1 (Room C-1)

Chair: Yuji Higaki (Oita University)

+Add all to schedule

4:45 PM - 5:00 PM

[E3-O503-01] Development of Artificial Client-scaffold Model and Cell-like Structures Based on Rational Design of Synthetic-polymer-based Biomolecular Condensates

*Akihiro Kishimura¹, Biplab K C¹, Yiwei Liu¹, Teruki Nii¹, Takeshi Mori¹, Yoshiki Katayama¹ (1. Kyushu University (Japan))

5:00 PM - 5:15 PM

[E3-O503-02] Self-association of poly(vinyl alcohol)-based amphiphilic diblock copolymer in aqueous solution

*Thu-Thao Pham¹, Seito Aibara², Takahiro Omori², Yoshihiro Kimura², Shin-ichi Yusa¹ (1. Univ. of Hyogo (Japan), 2. Japan VAM & POVAL Co., Ltd. (Japan))

5:15 PM - 5:30 PM

[E3-O503-03] Water-Soluble Polyion Complex (PIC) Micelles Composed of Oppositely Charged Random Copolymers

*Shin-ichi Yusa¹, Shukanta Bhowmik¹ (1. Univ of Hyogo (Japan))

5:30 PM - 5:45 PM

[E3-O503-04] Analysis of Molecular Interaction in Well-Defined Polymer Brushes and Modeling by Machine Learning

*Tsukuru Masuda¹, Shiwei Su¹, Yoichi Watanabe¹, Madoka Takai¹ (1. The Univ. of Tokyo (Japan))

Poster Session

[E3-P504] Poster 504

Fri. Dec 15, 2023 6:30 PM - 8:30 PM Poster (Annex)

+Add all to schedule

[E3-P504-01] Phase transition behavior of thermo-responsive polymers with two LCSTs

*Misato Hayashi¹, Shigeru Yamago², Rintaro Takahashi³, Shinichi Yusa¹ (1. Grad. Sch. of Eng., Univ. of Hyogo (Japan), 2. Grad. Sch. of Chem., Kyoto Univ. (Japan), 3. Grad. Sch. of Eng., Nagoya Univ. (Japan))

[E3-P504-02] Water-Soluble Polymer Micelles Composed of Biocompatible Amphiphilic Diblock Copolymers

*Kaito Yokota¹, Masaru Tanaka², Shingo Kobayashi², Shin-ichi Yusa¹ (1. Univ of Hyogo (Japan), 2. Kyusyu Univ. (Japan))

[E3-P504-03] Development of temperature-sensitive polyion complex microparticles capable of sustained release of oligonucleotide-based polymeric micelles

*Ziwei Ma¹, Hiroshi Kamizawa¹, Teruki Nii², Takeshi Mori^2,3, Yoshiki Katayama^2,3,4,5, Akihiro Kishimura^2,3,4,6 (1. Grad. Sch. Sys. Life Sci., Kyushu Univ. (Japan), 2. Dept. of Applied Chem., Fac. of Eng., Kyushu Univ. (Japan), 3. Ctr. for Future Chem., Kyushu Univ. (Japan), 4. Ctr. for Molecular Systems, Kyushu Univ. (Japan), 5. Ctr. for Adv. Med. Innov., Kyushu Univ. (Japan), 6. RIKEN Ctr. for Emergent Matter Sci. (Japan))

[E3-P504-04] pH- and Photo-Response Disintegration of Clear Liquid Marbles (CLM)

*Ema Onodera¹, 2.Syuji Fujii², Yoshinobu Nakamura², Shin-ichi Yusa¹ (1. University of Hyogo (Japan), 2. Osaka Institute of Technology (Japan))

[E3-P504-05] Aggregation of Block Copolymers Integrating Sugar Binding and Zwitterionic Chains in Aqueous Fields

*Saya Maeda¹, Yuji Higaki¹ (1. Oita Univ. (Japan))

[E3-P504-06] Microphase Separation of Double Hydrophilic Block Copolymers Induced by Cononsolvency

*Takumi Masuda¹, Masaya Takahashi¹, Naoki Kuraoka¹, Mai Nakamura¹, Yuji Higaki¹ (1. Oita Univ. (Japan))

[E3-P504-07] Preparation of Hollow Particles using Soap-Free Emulsion Polymerization

*Taketo Tokuda¹, Shin-ichi Yusa¹ (1. University of Hyogo (Japan))

[E3-P504-08] Enhanced Dopamine Detection Sensitivity by Copolymerization of
PEDOT-OH and PEDOT-COOH Coating on Pt/Ir Microelectrodes

*Tzu-Ying Chen¹, Yen-Yuan Chen², Yu-Wei Wu², Shyh-Chyang Luo¹ (1. Department of Materials Sci. and Engineering, National Taiwan Univ. (Taiwan), 2. Inst. of Molecular Biology (Taiwan))

[E3-P504-09] The impact of ionic strength and pH value on antifouling properties and electrochemical impedance of arch-like zwitterionic peptides immobilized on maleimide-functionalized surfaces

*Shu-Hong Lin¹, Shyh-Chyang Jack Luo¹ (1. Department of Materials Sci. and Eng., National Taiwan Univ. (Taiwan))

[E3-P504-10] An Electrochromic Thin Film Based on Corannulene-(triphenyl-amine)₅ and 3,4-Ethylenedioxythiophene Copolymer

*Chiao-Ling Yu¹, Shyh-Chyang Luo¹ (1. Department of Materials Science and Engineering, National Taiwan University (Taiwan))

[E3-P504-11] Exploring the Influence of Salt Variation on Conductivity and Solubility in PVA-g-PSBMA Polymer Electrolytes

*Chia-Yu Chen¹, Shyh-Chyang Luo¹ (1. Department of Materials Science and Engineering, National Taiwan Univ. (Taiwan))

[E3-P504-12] Tunable LCST Behavior and Degradability of Random Copolymer

*Md. Harun Or Rashid¹, Shin-ichi Yusa¹ (1. University of Hyogo (Japan))

[E3-P504-13] Light Melt Adhesive Based on Photothermal Conversion Materials

*Kenshin Yamamoto¹, Kanade Matsui¹, Ayuna Takenaka², Masaru Kotera³, Tomoyasu Hirai^2,4, Yoshinobu Nakamura^2,4, Syuji Fujii^2,4 (1. Grad. Sch. of Eng., Osaka Inst. Tech. (Japan), 2. Fac. of Eng., Osaka Inst. Tech. (Japan), 3. MORESCO Corp. (Japan), 4. Nanomater. Microdev. Res. Center, Osaka Inst. Tech. (Japan))

[E3-P504-14] Stabilization of Non-Aqueous Polyhedral Liquid Marbles Using Plates with Rough Surface

*Yamato Iwata¹, Tatsuro Yoshida¹, Tomoyasu Hirai^2,3, Yoshinobu Nakamura^2,3, Syuji Fujii^2,3 (1. Grad. Sch. of Eng., Osaka Inst. Tech. (Japan), 2. Fac. of Eng., Osaka Inst. Tech. (Japan), 3. Nanomater. Microdev. Res. Center, Osaka Inst. Tech. (Japan))

[E3-P504-15] Polyion Complex (PIC) Aggregates with Pendant Sugar-containing Shells

*Tomoki Ando¹, Rintaro Takahashi², Shin-ichi Yusa ¹ (1. University of Hyogo. (Japan), 2. The University of Nagoya. (Japan))

[E3-P504-16] Fabrication of Upper Critical Solution Temperature (UCST) Nanoparticles Composed of Zwitterionoc Polymer

*Hodaka Hara¹, Shin-ichi Yusa¹ (1. Univ. of Hyogo (Japan))

[E3-P504-17] Micrometer-sized Janus Particles Synthesized by Vapor Phase Polymerization

*Kazuma Kuroiwa¹, Kazusa Takeuchi¹, Yuya Oaki², Tomoyasu Hirai^3,4, Yoshinobu Nakamura^3,4, Syuji Fujii^3,4 (1. Grad. Sch. of Eng., Osaka Inst. Tech. (Japan), 2. Fac. of Sci. and Tec., Keio Uni. (Japan), 3. Fac. of Eng., Osaka Inst. Tech. (Japan), 4. Nanomater. Microdev. Res. Center, Osaka Inst. Tech. (Japan))

[E3-P504-18] Effects of side chain lengths on the network structures of hydrogels revealed by probe diffusion dynamics light scattering

*Keita Namba¹ (1. Graduate School of Science and Technology, Hirosaki University (Japan))

[E3-P504-19] Design of thermal and redox sensitive microcarrier for cell harvesting study

*Hsieh-Chih Tsai¹ (1. National Taiwan University of Science and Technology (Taiwan))

[E3-P504-20] Photoinduced Reversible Solid-to-Liquid Transitions by Thermally Stable Molecular Photoswitches

*Naoki Kaneda¹, Keiichi Imato^1,2, Akira Ishii¹, Ichiro Imae¹, Yousuke Ooyama¹ (1. Hiroshima Univ. (Japan), 2. JST-PRESTO (Japan))

[E3-P504-21] Fabrication of
drug loadable organic inorganic capsules for bo ne defect
treatment and analysis of osteoinductive function

*Syuuhei Komatsu¹, Taka-Aki Asoh¹, Akihiko Kikuchi¹ (1. Dept. Mater. Sci. & Technol., Tokyo Univ. of Science (Japan))

[E3-P504-22] Preparation of Polysaccharide Composite Films using Cyclodextrin- Conjugated Chitosan and Their Application as a Drug Carrier

*Takuya Sagawa¹, Aoi Kashiwabara¹, Mineo Hashizume¹ (1. Tokyo Univ. of Sci. (Japan))

[E3-P504-23] Stretchable and self-adhesive tattoo-like PEDOT:PSS electrode for long-term electrophysiological measurements

*Jiyeong Choi¹, Joohwan Shin¹, Taeil Kim¹ (1. sungkyunkwan univ (Korea))

[E3-P504-24] Construction of Plant Cell Wall-Inspired Hybrid Polysaccharide Networks via Enzyme-Catalyzed Synthesis of Cellulose Oligomers

*Yuta Sakurai¹, Yuuki Hata¹, Toshiki Sawada¹, Takeshi Serizawa¹ (1. Tokyo Tech (Japan))

[E3-P504-25] Classification and Identification of water-soluble polymers by machine learning using fluorescence signals from multiple peptide sensors

*Shion Hasegeawa¹, Toshiki Sawada¹, Takeshi Serizawa¹ (1. Tokyo Tech (Japan))

[E3-P504-26] Interfacial Properties of Two-Dimensional Cellulose Oligomer Assemblies with Surface-Alkyl Groups

*Hirotaka Kamada¹, Yuuki Hata¹, Toshiki Sawada¹, Takeshi Serizawa¹ (1. Tokyo Tech (Japan))

[E3-P504-27] Quartz Crystal Microbalance Analysis of the Glass Transition Temperature for Polystyrene Thin Film

*Akira Uchiyama¹, Daiki Komiyama, Yoshihisa Fujii¹, Naoya Torikai¹ (1. Mie Univ. (Japan))

[E3-P504-28] Effects of Surface Segregation on Functional Properties in (Bottlebrush Polystyrene/Liner Polystyrene) Blend Films

*Anri Nishimura¹, Yoshihiro Yamauchi², Sadaki Samitsu², Yoshihisa Fujii¹, Naoya Torikai¹ (1. Mie Univ. (Japan), 2. National Institute for Materials Sci. (Japan))

[E3-P504-29] Exfoliation and Liquid Crystal Formation of Hydroxide Nanosheets with Large Aspect Ratio

*Kazuya Morimoto¹, Masumi Kamon², Kenji Tamura² (1. National Inst. of Advanced Indus. Sci. and Tech. (Japan), 2. National Inst. for Materials Sci. (Japan))

[E3-P504-30] Conductive Polymers Formed in a Free-Volume Space of Synthetic Resins and Rubbers and Their Applications as Composite Materials

*Sayaka Hirai¹, Yuki Tokura¹, Hiroaki Imai¹, Yuya Oaki¹ (1. Faculty of Sci. and Tech., Keio Univ. (Japan))

[E3-P504-31] Preparation of TiO₂ Nanoparticles Grafted with Biocompatible Polymers Synthesized with Phosphonic Acid-Functionalized RAFT Agents for Sonodynamic Therapy

*Aoi Katayama¹, Zhicheng Shao², Yukiya Kitayama¹, Eiji Yuba¹, Atsushi Harada¹ (1. Osaka Metropolitan Univ. (Japan), 2. Osaka Prefecture Univ. (Japan))

[E3-P504-32] Preparation of Hollow Polyester Particles by Particulate Interfacial Photocrosslinking

*Moeka Ogawa¹, Yukiya Kitayama¹, Eiji Yuba¹, Nobukazu Taniguchi¹, Atsushi Harada¹ (1. Osaka Metropolitan Univ. (Japan))

[E3-P504-33] Microgel Reinforced Zwitterionic Double Network Hydrogels.

*Yi-Yin Chen¹, Kang-Ting Huang¹, Chun-Jen Huang^1,2 (1. Department of Chemical and Materials Engineering,National Central Univ. (Taiwan), 2. R&D Center for Membrane Tech., Chung Yuan Christian Univ. (Taiwan))

[E3-P504-34] Continuous-Flow Microreactor for Quick Development of Antifouling Coating

*PoYen Lin¹, Sheng-Ti Huang¹, Chen-Jen Huang^1,2,3 (1. Department of Chemical & Materials Engineering, National Central Univ. (Taiwan), 2. R&D Center for Membrane Technology, Chung Yuan Christian Univ. (Taiwan), 3. NCU-Covestro Research Center, National Central Univ. (Taiwan))

[E3-P504-35] Biodegradable and pH-Responsive Nanoparticles for the Triggered Release of Antibiotics to Infected Wounds

*MinHsuan Ho¹, LamDieu Linh², YingTzu Cheng¹, Chun-Jen Huang ³ (1. Department of Chemical and Materials Engineering, National Central University (Taiwan), 2. Department of Biomedical Sciences and Engineering, National Central University (Taiwan), 3. R&D Center for Membrane Technology, Chung Yuan Christian University (Taiwan))

[E3-P504-36] Biodegradable Phosphocholine Cross-Linker: Enhancing Mechanical Performance and Biocompatibility of Zwitterionic Hydrogels

*Kai Ou¹, Hoang Nam Nguyen¹, Thi Lan Huong Ngo², Yasuhiko Iwasaki³, Chun-Jen Huang^1,4 (1. Department of Chemical and Materials Engineering, National Central University (Taiwan), 2. Department of Biomedical Sciences & Engineering, National Central University (Taiwan), 3. Department of Chemistry and Materials Engineering, Kansai University (Japan), 4. R&D Center for Membrane Technology, Chung Yuan Christian University (Taiwan))

[E3-P504-37] Methacrylate Silatrane: New Building Block for Development of Functional Polymeric Coatings through Controlled Silanization

*Mai Thi Pham¹, Tung Chun Chiang¹, Truc Van Vu¹, Tzu Ying Cheng¹, Jen Chun Huang^1,2,3 (1. Department of Chemical and Materials Engineering, National Central Univ (Taiwan), 2. R&D Center for Membrane Tech, Chung Yuan Christian Univ (Taiwan), 3. NCU-Covestro Research Center, National Central Univ (Taiwan))

Oral Session

[E3-O601] Oral 601

Sat. Dec 16, 2023 9:00 AM - 12:00 PM Session 1 (Room C-1)

Chair: Eriko Sato (Osaka Metropolitan Univ.), Keiichi Imato (Hiroshima University), Shin-ichi Yusa (Univ of Hyogo)

+Add all to schedule

9:00 AM - 9:30 AM

[E3-O601-01 (Symposium Invited)] Driving Droplets on Liquid Repellent Surfaces via Light-Driven Marangoni Propulsion

Hyesun Hwang¹, Jaeseung Lee¹, Syuji Fujii², *Sanghyuk Wooh¹ (1. Chung-Ang Univ. (Korea), 2. Osaka Inst. Tech. (Japan))

9:30 AM - 9:45 AM

[E3-O601-02] Microphase Separation of Double Zwitterionic Block Copolymers: Specific Phase Diagram with Concentration Dependent Selective Solvent Partitioning

*Yuji Higaki¹, Masaya Takahashi¹, Takumi Masuda¹ (1. Oita Uni. (Japan))

9:45 AM - 10:00 AM

[E3-O601-03] Self-Assembling Polymer Drugs with Amphiphilic Block Copolymers Based on Poly(ethylene glycol) and Poly(cysteine) for the Treatment of Nonalcoholic Steatohepatitis

*Yuta Koda¹, Yukio Nagasaki¹ (1. Univ. of Tsukuba (Japan))

10:00 AM - 10:15 AM

[E3-O601-04] Cell adhesion properties and structure analysis of interfacial water of zwitterion based N-oxide containing block copolymer coated surface

*Naoto Ogiwara^1,2, Hidenori Noguchi³, Tsukuru Masuda¹, Madoka Takai¹ (1. Tokyo Univ. (Japan), 2. TOYO INK SC HOLIDINGS Corp. Ltd. (Japan), 3. National Institute for Materials Science (Japan))