ポスターセッション

学生ポスターセッション

Wed. Jun 21, 2023 12:30 PM - 1:20 PM Room SP1 (P会場)

+Add all to schedule

[SP-01] Research on correlation between molding conditions (including resin type) and de-molding force

*Tetsuya Ofusa¹, Fuminobu Kimura¹, Yusuke Kajihara¹ (1. The University of Tokyo)

[SP-03] Temperature change resistance on metal-polymer joint manufactured via injection molded direct joining

*SHUOHAN WANG¹, Fuminobu Kimura¹, Eiji Yamaguchi², Yukinori Suzuki², Yusuke Kajihara¹ (1. the University of Tokyo, 2. SINTOKOGIO, LTD.)

[SP-05] Study on color evaluation of injection molded products using colored pellets

*Takumi Suzuki¹, Masahiro Seto¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[SP-07] Investigation of Optimal Injection Molding Conditions for Interface-Treated Tricalcium Phosphate/Poly(lactic acid) Composites

*Hiroyuki Arimatsu¹, Masato Sakaguti¹ (1. Salesian Polytechnic)

[SP-09] In-line measurement method of concentration of N₂ for foam injection molding process

*Itsuki Yoshikawa¹, Yuta Hikima¹, Masahiro Ohshima¹ (1. Kyoto Univ.)

[SP-11] Separation of aluminum alloy/glass-fiber reinforced polycarbonate bonding interface by CO₂ impregnation and heating-induced interface foaming

*Yuto Mori¹, Rajesh Kumar Sharma¹, Kenaro Taki¹ (1. Kanazawa Univ.)

[SP-13] Plastic Recovery and Resin Species Percentage Analysis at Fukuoka University

*Sarara Hashimoto¹, Mirei Ito¹, Narumi Aratani¹, Akiyoshi Kuramochi¹, Daichi Shibata¹, Rio Yamashita¹, Yurika Tachimoto¹, Shinya Suzuki¹, Hiroki Omura², Shigeru Yao¹ (1. Fukuoka Univ., 2. RECOTEC.inc)

[SP-15] Crystallization and higher-order structure of biobased polyesters for chemical recycling

*Aki Nishiyama¹, Hiroki Takeshita¹, Katsuhisa Tokumitsu¹, Kotohiro Nomura² (1. Univ. Shiga. Pref., 2. Tokyo Metropolitan Univ.)

[SP-17] Effect of Mechanical Treatment by Shear and Cooling Milling Method on Tensile Properties of Cellulose/PEG Composite.

*Kohei Nagata¹, Hiroko Yano¹, Tomonori Kodo¹, Taichi Nishio¹, Akihiro Nishioka¹ (1. Yamagata Univ.)

[SP-19] Evaluation of mixing performance and FEM analysis of Octa screw extruder

*Ren Ito¹, Hiroshi Ito^2,3, Yutaka Kobayashi³, Shinitiro Tanifuji⁴, Daisuke Yorifuzi⁴ (1. Graduate School of Organic Material Science,Yamagata University, 2. Yamagata Univ, 3. Reserach Center for GREEN Materials and Advanced Processing, 4. HASL corp.)

[SP-21] Measurement of residence time distribution in a twin-screw extruder by optical probe and comparison with 2.5D flow analysis results

*Yuuma Nakazawa¹, Masatoshi Ohara³, Daisuke Yorifuji², Shin-ichiro Tanifuji², Kenaro Taki¹ (1. Kanazawa Univ., 2. HASL, 3. SHIBAURA MACHINE)

[SP-23] Role of molecular entanglements in melt-drawing of ultrahigh-molecular-weight polyethylene

*Ayaka Takazawa¹, Masaki Kakiage¹, Takeshi Yamanobe¹, Hiroki Uehara¹, Shinichi Asai², Shoko Naruke², Takuya Ohnishi², Yasutake Wakabayashi² (1. Gunma Univ., 2. Tosoh Co.)

[SP-25] Effect of applied stress on self-hardening phenomenon for uniaxially drawn polypropylene film

*sotaro sakuraba¹, masaki kakiage¹, hiroki uehara¹, takeshi yamanobe¹ (1. Gunma Univ.)

[SP-27] Effects of Preform Insertion Method and Pressing Method on Strength Properties in Fluoroelastomer Compression Molding

*Keita SHINOZAWA¹, Pomi NAKABAYASHI¹, Rikuto MIZUKOSHI², Yasuhiko MURATA², Daisuke OHTA³, Seiichi HIRANO³, Wakako DEWA³ (1. NIPPON INSTITUTE OF TECHNOLOGY Mechanical Systems Engineering, 2. NIPPON INSTITUTE OF TECHNOLOGY Mechanical Engineering, 3. DAIKIN INDUSTRIES, LTD.)

[SP-29] Study on additives that produce gamma-ray resistance

*Ryoma Suzuki¹, Tokumitsu Katsuhisa¹, Takeshita Hiroki¹, Hironiwa Takayuki², Matsumoto Atsushi² (1. University of Shiga prefecture, 2. KOGA ISOTOPE)

[SP-31] Supermolecular structure and mechanical properties of olefin-based thermoplastic vulcanizates.

*Ouki Urata¹, Akihiko Morikawa¹, Asae Ito¹, Yusuke Hiejima¹, Koh-hei Nitta¹ (1. Kanazawa Univ.)

[SP-33] Molding of prepreg molded aramid fiber reinforced polycarbonate matrix composites and their mechanical properties

Noboru Nakayama¹, *Naohiro Shimakura¹ (1. Shinshu Univ.)

[SP-35] Study on Improvement of Physical Properties of UV-curable Silicone Rubber by Addition of PMPS.

*Shoutarou Hata¹, Katsuhisa Tokumitsu¹, Hiroki Takeshita¹ (1. University of Shiga Prefecture)

[SP-37] Research on continuous molding of CFRTP pipes

*Kohei Taniguchi¹, Asami Nakai¹, Masaki Ohishi² (1. Gifu Univ., 2. Satoh Machinery Works Co. Ltd.)

[SP-39] Toughening of cellulose non-woven fabric/acrylic rubber composite

*Hiroto Ito¹, Shogo Nobukawa¹, Katsuhiro Inomata¹ (1. Nagoya Institute of Technology)

[SP-41] Relationship between morphology of base resin and interfacial property in c-FRTP

*Shota TAKIMOTO Takimoto¹, Akio Ohtani¹ (1. Kyoto institute of Technology)

[SP-43] Evaluation of mechanical properties by controlling the orientation of bacterial cellulose

*Hiroto Takayashiki¹, Toshiyuki Yashuhara¹ (1. Nippon Institute Technology)

[SP-45] Measurement of glass fiber breaking behavior in resin under shear flow using AE sensor attached to rheometer and numerical simulation of glass fiber breaking

*Keigo Inamori¹, Masatoshi Ohara², Kenaro Taki¹ (1. Kanazawa Univ., 2. SHIBAURA MACHINE)

[SP-47] Crystal transition behavior in colloidal crystallization of temperature responsive polymer microgel dispersion

*Reina Ota¹, Hiroki Takeshita¹, Katsuhisa Tokumitsu¹ (1. The Univ. of Shiga Pref.)

ポスターセッション

学生ポスターセッション

Wed. Jun 21, 2023 1:20 PM - 2:10 PM Room SP1 (P会場)

+Add all to schedule

[SP-02] Investigation of the Effect of Coatings on the Mold Release Resistance of Injection Mold Surfaces

*Leo SOMEYA¹, Fumiya KAWANISHI¹, Yasuhiko MURATA¹, Ken OGIWARA² (1. Nippon Institute of Technology, 2. Nippon ITF Inc.)

[SP-04] Influence of anchor structure and Reinforcing Fiber Content in anchor Part on Joining Strength in Metal-Resin Joining Injection Molded Products

*Shota Yasuda¹, Toru Suzuki¹, Masahiro Seto¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[SP-06] Influence of Counter Pressure Mold on surface properties in Injection foamed molding

*Shota Tanaka¹, Masakatsu Taga², Masahiro Seto¹, Atsushi Mizutani², Masashi Yamabe¹ (1. Kanazawa Institute of Technology, 2. Nissan Motor Corporation)

[SP-08] Uniformity of plasticized resin in injection molding

*SHUNSUKE KITO¹, TATUYA TANAKA¹, MASAHIRO SASADA¹, SOU SHIMOKUSUZONO² (1. DOSHISHA Univ., 2. TOYO MACHINERY & METAL CO.,LTD.)

[SP-10] Effect of ultrasonic irradiation on the foamability of polystyrene

*Daiki Nogawa¹, Sathish Kumar Sukumaran¹, Masataka Sugimoto¹ (1. Yamagata Univ.)

[SP-12] Separation of the glass/epoxy interface by CO₂ impregnation and heating-induced interface foaming

Soichiro Kishimoto¹, Rajesh Kumar Sharma¹, *Kenaro Taki¹ (1. Kanazawa Univ.)

[SP-14] Effects of melting temperature and melting time on crystallization behavior of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

*Kakeru Osuga¹, Kenta Moriyama¹, Yuta Hikima¹, Masahiro Ohshima¹ (1. Kyoto Univ.)

[SP-16] Mechanical Properties of Gamma Irradiation Plant-Derived Polyamide 1010

*Maiko Morino¹, Ruka Hotsumi², Yosuke Nishitani², Tatsuya Kitagawa³, Shinya Kikutani³ (1. Graduate School of Engineering, Kogakuin University, 2. Kogakuin University, 3. STARLITE Co., Ltd.)

[SP-18] Effect of side chains of triacylglycerols on plasticization of
cellulose acetate

*Mimu Otsu¹, Hideyuki Uematsu¹, Syuichi Tanoue¹, Ayaka Yamaguchi¹ (1. Fukui Univ.)

[SP-20] Influence of extensional rheology of polypropylene on dispersion state of carbon nanotube

*Yuya Fujisawa¹, Kenichi Takemura¹, Koki Matsumoto², Tatsuya Tanaka³ (1. Kanagawa Univ., 2. Fukuoka Univ., 3. Doshisha Univ.)

[SP-22] Structure and mechanical properties for polypropylene films of α-form crystals obtained by transformation from mesomorphic phase.

*Yuta Fukuda¹, Kida Takumitsu¹, Yamaguchi Masayuki¹ (1. Japan Advanced Institute Science and Technology)

[SP-24] On-Line Phase Contrast Measurement and Higher-Order Structure Analysis of Stretching and Relaxation Processes in PVDF Film

*Kota Sasaki¹, Hiroshi Ito^2,3, Kotaku Saigusa⁴, Masahiro Yamazaki⁴ (1. Graduate School of Organic Materials Science. ,Yamagata University, , 2. Yamagata univ., 3. Research center for Green Materials and Advanced Processing, 4. Kureha Corp.)

[SP-26] Effect of graphene oxide addition on the carbonization of poly(ethylene telephthalate) films

*Sein Shibata¹, Wataru Takarada¹, Masatoshi Shioya¹ (1. Tokyo Tech)

[SP-28] Effects of branched molecules on nucleation behavior and mechanical properties for poly(oxymethylene)

*Tetsuya Kotani¹, Hiroki Takeshita¹, Katsuhisa Tokumitsu¹, Yuhki Kanda² (1. Univ. of Shiga Pref., 2. Polyplastics Co., Ltd.)

[SP-30] Study on Liner Materials for High-Pressure Hydrogen Tanks Using ETFE blends

*Naoya Osada¹, Katsuhisa Tokumitu¹, Hiroki Takeshita¹, Eiiti Nishi², Toru Sasaki², Shin Nishimura³, Hirotada Fujiwara³ (1. University of Shiga prefecuture, 2. AGC Co.,Ldt, 3. Kyusyu university)

[SP-32] Effect of copper phthalocyanine addition on polystyrene/(multi-walled carbon nanotube) nanocomposites

*Yui Sugiura¹, Sathish Kumar Sukumaran¹, Masataka Sugimoto¹ (1. Yamagata Univ.)

[SP-34] Effects of Molding Conditions of Bent Injection Molding Machine on Appearance Quality and Mechanical Properties of Molded Wood-Plastic composite Products

*Senri Hirata¹, Hayato Kikuta¹, Akio Ohtani¹ (1. Kyoto Institute of Technology)

[SP-36] Effect of Injection Molding Conditions on Mechanical Properties of Joint Interface in c-FRTP Pultrusion/Injection Hybrid Molding

*TAKUMI Okahashi¹, AKIO Ohtani¹, MASAKI Ohishi² (1. KYOTO institute of technology, 2. SATOH GROUP)

[SP-38] Study on bonding of dissimilar materials by anchoring at bonding interfaces using fiber clothes

*Akira Matsuba¹, Masahiro Seto¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[SP-40] Effect of electrostatic interaction on the interfacial adhesion between polyvinyl chloride and reinforcing fibers

*Shunya Yorikane¹, Ayaka Yamaguchi¹, Hideyuki Uematsu¹, Shuichi Tanoue¹ (1. Fukui Univ.)

[SP-42] Structures and Properties of Stacked Cellulose Nanofiber Films by Spin-coating Method

*Yuki Katsuragi¹, Takuya Matsumoto¹, Takashi Nishino¹ (1. Kobe Univ.)

[SP-44] Effect of Addition of Zinc Bisacrylate on Uniaxial Elongational Viscosity Properties of Polypropylene.

*Eiji Hatai¹, Hiroko Yano¹, Tomonori Koda¹, Taichi Nishio¹, Akihiro Nishioka¹ (1. Yamagata Univ.)

[SP-46] Analysis of failure in crystalline polymers doped aggregation-induced emission dye

*Yusuke Momonoi¹, Yusuke Hiejima¹, Asae Ito¹, Koh-hei Nitta¹ (1. Kanazawa Univ.)

Sessions

ポスターセッション » 学生ポスターセッション

学生ポスターセッション

学生ポスターセッション

Authentication