*Senri Hirata¹, Tsutomu Maeda², Ryo Marui³, Toshihiro Motochika⁴, Akio Ohtani¹ (1. Kyoto Institute of Technology, 2. Nihon Yuki Co.,Ltd., 3. Marui Textile Machinery Co.,Ltd., 4. Kajirene Inc.)

12:00 PM - 12:20 PM

[G-108] Evaluation of Composite Materials by Using X-ray Phase Imaging

*Naoki Morimoto¹, Takahiro Doki¹, Lisa Ishikawa¹, Kenji Kimura¹ (1. Shimadzu Corp.)

一般セッション

複合材料

Thu. Jun 20, 2024 10:30 AM - 11:50 AM Room G (4階　401会議室)

座長:大谷章夫(京都工芸繊維大学)

+Add all to schedule

10:30 AM - 10:50 AM

[G-201] Toughness Enhancement Mechanism of Glass Fiber Reinforced PET/Ethylene Ionomer Blends

*Ritomo Sakurai¹, Toshiaki Ougizawa¹, Keiichi Kuboyama¹ (1. Tokyo Institute of Technology)

Cancelled

10:50 AM - 11:10 AM

[G-202] Study on the Effect of Fiber Shape on Mechanical Properties of Carbon/Aramid Fiber Reinforced Thermoplastic Composites

*Seiya Kawaharada¹, Tatsuya Tanaka¹, Masahiro Sasada¹ (1. Doshisha Univ)

11:10 AM - 11:30 AM

[G-203] Improvement of Laser-assisted AFP Lab Machine of CFRTP

*Soichiro Ishida¹, Yoshitaka Kono¹, Ryota Saga¹, Kenichi Sakamoto¹, Takahiro Hayashi², Takeshi Ishikawa², Tadashige Ikeda³, Takeharu Sakai¹ (1. Tottori Univ., 2. Mitubishi Chemical Co.Ltd., 3. Cyubu Univ.)

11:30 AM - 11:50 AM

[G-204] Simple Model for Thermal Analysis of CFRTP Tape during Automated Fiber Placement

Takashi Yamashita², *Taichi Oguri¹, Tadashige Ikeda¹, Takeharu Sakai³, Toshihide Sugahara⁴, Fumitake Kobayashi⁴, Yuichi Kobayashi⁴, Hiroaki Zushi⁴, Masanori Nakajima⁵, Daisuke Mori⁶, Wataru Okumura⁶, Hiroyuki Hasebe⁶ (1. Chubu Univ., 2. Graduate School of Chubu Univ., 3. Tottori Univ., 4. Maruhachi Corporation, 5. Kanazawa Institute of Technology, 6. Industrial Research Institute of Ishikawa)

一般セッション

複合材料

Thu. Jun 20, 2024 1:30 PM - 2:50 PM Room G (4階　401会議室)

座長:仲井朝美(岐阜大学)

+Add all to schedule

1:30 PM - 1:50 PM

[G-205] Tensile and bending properties of a sandwich films with polypropylene inserted between CFRTP sheets

*Kai Xu¹, Pinjung Chu¹, Rokibul Hasan Rumon¹, Atsuhiro Fujimori¹ (1. Saitama Univ.)

1:50 PM - 2:10 PM

[G-206] An Investigation of Out-of-Plane Shear Nonlinear Behavior and Damage in Randomly Oriented Chopped UD Tape Reinforced Composites

*Takashi Murakami¹, Tsuyoshi Matsuo² (1. SHIMADZU CORPORATION, 2. National Maritime Research Institute)

2:10 PM - 2:30 PM

[G-207] Improvement of simulation accuracy by fiber-orientation analysis of CF-SMC product

*Yukiko Matsuyama¹, Yasutaka Shinoura¹, Yoshihide Kakimoto¹, Takeshi Ishikawa¹ (1. Mitsubishi Chemical Corporation)

2:30 PM - 2:50 PM

[G-208] Investigation of impact testing and simulation of CF-SMC product

*Yasutaka Shinoura¹, Yoshihide Kakimoto¹, Yukiko Ikebe¹, Takeshi Ishikawa¹ (1. Mitsubishi Chemical Corporation)

一般セッション

複合材料

Thu. Jun 20, 2024 3:20 PM - 4:20 PM Room G (4階　401会議室)

座長:高山哲生(山形大学)

+Add all to schedule

3:20 PM - 3:40 PM

[G-209] Study on Optimum Forming Conditions of CFRTP Roll Forming

*Masaki Oihshi¹, Asami Nakai², Akito Murai² (1. SATOH MACHINARY, 2. GIFU Univ.)

3:40 PM - 4:00 PM

[G-210] CFRTP pultrusion conditions for continuous forming with roll forming.

*Koki Sakakibara¹, Masaki Ohishi², Asami Nakai¹ (1. Gifu Univ., 2. SATOH MACHINERY WORKS CO.,LTD.)

4:00 PM - 4:20 PM

[G-211] Study of cooling section molding conditions for high speed CFRTP pipe pultrusion molding

*Kento Yamada¹, Masaki Ohishi², Asami Nakai³ (1. Gifu University Graduate School, 2. SATOH MACHINERY WORKS CO.,LTD., 3. Gifu University)

Sessions

一般セッション » 複合材料

複合材料

[G-102] Polymer ceramic foam materials for the realization of the 6th Generation Mobile Communication System

[G-103] Enhancement of the adhesion of polyethylene surfaces using a block copolymer

[G-104] Effect of Matrix Crystallization on Mechanical Properties of Cellulose Nano Fiber/Poly(lactic acid) Composites

複合材料

[G-105] Influence of Gamma Irradiation on Mechanical Properties of Ramie Fiber Reinforced Plant-Derived Polyamide 1010 Biomass Composites

[G-106] Effect of Fiber Moisture Content of Continuous-Natural Fiber- Reinforced PLA Filaments on the Mechanical Properties of 3D Printed Parts

[G-107] Effect of natural fiber treatment method on dispersion state in natural fiber/PP resin using Direct Fiber Feeding Injection Molding

[G-108] Evaluation of Composite Materials by Using X-ray Phase Imaging

複合材料

[G-201] Toughness Enhancement Mechanism of Glass Fiber Reinforced PET/Ethylene Ionomer Blends

[G-202] Study on the Effect of Fiber Shape on Mechanical Properties of Carbon/Aramid Fiber Reinforced Thermoplastic Composites

[G-203] Improvement of Laser-assisted AFP Lab Machine of CFRTP

[G-204] Simple Model for Thermal Analysis of CFRTP Tape during Automated Fiber Placement

複合材料

[G-205] Tensile and bending properties of a sandwich films with polypropylene inserted between CFRTP sheets

[G-206] An Investigation of Out-of-Plane Shear Nonlinear Behavior and Damage in Randomly Oriented Chopped UD Tape Reinforced Composites

[G-207] Improvement of simulation accuracy by fiber-orientation analysis of CF-SMC product

[G-208] Investigation of impact testing and simulation of CF-SMC product

複合材料

[G-209] Study on Optimum Forming Conditions of CFRTP Roll Forming

[G-210] CFRTP pultrusion conditions for continuous forming with roll forming.

[G-211] Study of cooling section molding conditions for high speed CFRTP pipe pultrusion molding

Authentication