*Akifumi Kurita^1,2, Yohei Yoshimura¹, Makoto Suzuki¹, Hidetoshi Yokoi³, Yusuke Kajihara² (1. DENSO CORPORATION, 2. Tokyo Univ., 3. YOKOI Labo)

*Daisuke Yagi¹, Hiroki Nakatsuchi¹, Ryotaro Shimada¹, Kan Kobayashi¹ (1. Hitachi, Ltd. Research & Development Group)

*Tsukasa Kida¹, Masatoshi Ohara², Shogo Nagasawa¹, Keigo Inamori¹, Shin-ichiro Tanifuji³, Kentaro Taki¹ (1. Kanazawa Univ., 2. Shibaura machine, 3. HASL)

*Yuki Nishimura¹, Kentaro Taki¹ (1. Kanazawa Univ.)

*Yukino Ito¹, Shotaro Nishitsuji¹, Sano Hironari¹, Inoue Takashi¹, Ito Hiroshi¹ (1. Yamagata Univ.)

*Koga Komatsu¹, Tomonori Koda¹, Yuki Aizawa², Taichi Nishio¹, Akihiro Nishioka¹, Masahiro Yamada³, Masayuki Sugimoto³ (1. Yamagata University Graduate School of Organic Materials Science, 2. Yamagata University Faculty of Engineering, 3. Osaka Gas Co., Ltd.)

*Tomoya Watanabe¹, Tomonori Koda¹, Yuki Aizawa², Taichi Nishio¹, Akihiro Nishioka¹, Takamasa Endo³, Noriyuki Sato³ (1. Yamagata University Graduate School of Organic Materials Science, 2. Yamagata University Faculty of Engineering, 3. Industrial Technology Institute Miyagi Prefectural Government)

*Natsuki Kamioka¹, Tomonori Koda¹, Yuki Aizawa², Taichi Nishio¹, Akihiro Nishioka¹ (1. Yamagata University Graduate School of Organic Materials Science, 2. Yamagata University Faculty of Engineering)

*Shogo Kamiya¹, Tomonori Koda¹, Yuki Aizawa², Taichi Nishio¹, Akihiro Nishioka¹, Yoshiyasu Shimizu³ (1. Yamagata University Graduate School of Organic Materials Science, 2. Yamagata University Faculty of Engineering, 3. Kobe Kizai Co., Ltd.)

*Kugaki Baba¹, Tetsuo Takayama¹, Tomonori Koda¹, Yuki Aizawa², Taichi Nishio¹, Akihiro Nishioka¹ (1. Yamagata University , 2. Yamagata University Faculty of Engineering)

*Ryuya Takahashi¹, Tomoki Uchio², Tomonori Koda¹, Yuki Aizawa³, Taichi Nishio¹, Akihiro Nishioka¹ (1. Yamagata University, 2. IDEMITSU FINE COMPOSITES CO., LTD., 3. Yamagata University Faculty of Engineering)

*Hayata Kobayashi¹, Tomonori Koda¹, Yuki Aizawa², Taichi Nishio¹, Akihiro Nishioka¹ (1. Yamagata University, 2. Yamagata University Faculty of Engineering)

*Kousaku Tao^1,2, Koji Yamada¹, Seiji Higashi¹, Keitaro Kago¹, Shiho kuwashiro¹, Hiroshi Hirano¹, Hiroki Takeshita², Katsuhisa Tokumitsu² (1. Osaka Research Institute of Industrial Science and Technology, 2. Depertment of Material and Science, School of Engineering, The University of Shiga Prefecture)

*Takumi Nakagawa¹, Hiroki Takeshita¹, Katsuhisa Tokumitsu¹ (1. The University of Shiga Prefecture)

*Yuka Nagata¹, Hiroki Takeshita¹, Katsuhisa Tokumitsu¹ (1. The University of Shiga Prefecture)

*Kazuki Nakao¹, Katsuhisa Tokumitsu¹, Hiroki Takeshita¹, Tomoyuki Kosai² (1. THE UNIVERSITY of SHIGA PREFECTURE, 2. BRIDGESTONE Corporation)

*Ryota Kawashima¹, Sukumaran Kumar Sathish¹, Masataka Sugimoto¹, Kei Yamaguchi², Masahiro Kawasaki² (1. Yamagata University, 2. KUREHA Corporation)

*Naoki Abe¹, Sukumaran Kumar Sathish¹, Masataka Sugimoto¹, Eichi Nishi² (1. Yamagata Univ., 2. AGC)

*Kazuya Toyoshi¹, Hidenori Hirai^1,2, Hideyuki Uematsu¹, Yuji Sato², Shuichi Tanoue¹ (1. Univ. of Fukui, 2. THE YOKOHAMA RUBBER CO., LTD)

*Shunya Nishimura¹, Shota Nakakubo¹, Ayaka Yamaguchi¹, Hideyuki Uematsu¹, Shuichi Tanoue¹, Masachika Yamane¹ (1. Fukui University)

*Tomoya Takano¹, Sathish Kumar Sukumaran¹, Masataka Sugimoto¹, Takamasa Endo², Atsuko Suino², Norimasa Sato² (1. Yamagata Univ, 2. Industrial Technology Institute.Miyagi Prefectural Government)