[P63] A study on crystallization process of crystalline polymer with polysilane

*kiyoaki Sakaguchi¹, Hitoki Takeshita¹, Katsuhisa Tokumitsu¹, Takeshi Kanzawa² (1. The university of Shiga Prefecture, 2. Northeastern Industrial Research Center of Shiga Prefecture)

[P64] Influence of fiber length and fiber orientation on the tensile elastic modulus of carbon fiber reinforced thermoplastics

*Yuko Murayama¹, Yoshihide Katagiri¹, Sasayama Toshiki¹, Sato Norikazu¹, Yoshinori Inoue¹, Hirotaka Okamoto¹, Jumpei Kawada¹ (1. TOYOTA CENTRAL R&D LABS)

[P65] Electro-responsive shape memory properties of crystalline polymer containing carbon black

*Yutaka Akiyama¹, Shogo Nobukawa¹, Katsuhiro Inomata¹ (1. Nagoya Institute of Technology.)

[P66] Physical properties of UHMWPE/MWCNT composite

*Daichi Yamamoto¹, Kazuki Miyamae¹, Takumi Okihara¹ (1. Okayama Univ.)

[P67] Effect of volume fraction of hydroxyapatite on reinforcement of poly-L-lactic acidcomposites

*Chenyue He¹, Takuya Matsumoto¹, Takashi Nishino¹ (1. Kobe Univ.)

[P68] Effect of molding pressure on flexural properties of aramid fiber reinforced ultra-high molecular weight polyethylene

*Teruhiko Nakagomi¹, Noboru Nakayama¹ (1. Shinshu Univ.)

[P69] Fabrication and Mechanical Properties of Carbon Fiber Reinforced Thermoplastics Composites with Poly(ether ether ketone) / Nanodiamond Composite Matrix

*Jun Iwata¹, Takuya Matsumoto¹, Takashi Nishino¹ (1. Department of Chemical Science and Engineering, Graduate School of Engineering, Kobe University)

[P70] Study on mechanical property and weather resistance of CNF-added polyethylene.

*Shuta Iwai¹, Katsuhisa Tokumitsu¹, Hiroki Takeshita¹ (1. The University of Shiga Prefecture)

[P71] A Study on Resin Impregnation Behavior by Thickening Fiber in VaRTM Molding

*Hiroaki Murata¹, Tohru Suzuki¹, Masahiro Seto¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[P72] The additive effects of low-moleclar-weight-compounds on the dynamic mechanical properties of HDPE

*Asae Ito¹, Kaori Hioki¹, Koichi Kono¹, Kisaki Matsudaira¹, Koh-hei Nitta¹ (1. Kanazawa Univ.)

[P73] Effect of external heating conditions on interfacial properties in pultrusion and injection hybrid molding for c-FRTP

*Hiroki Nakajima¹, Masaki Ohishi², Akio Ohtani¹ (1. Kyoto Institute of Technology, 2. Satoh Machinery Works Co., Ltd)

[P74] Reduction of fiber friction during CFRTP pipe molding with high elastic modulus by open molding

*Kousuke Yamaguchi¹, Asami Nakai¹ (1. Gifu Univ.)

[P75] Effect of flow shape on impregnability and mechanical properties of molded products in resin infusion type pultrusion molding

*Ryusei Yasutomo¹, Masaki Ohishi², Asami Nakai¹ (1. Gifu Univ., 2. Satoh Machinery Works)

[P76] Effects of Dispersion of Hydrophilic Silica Nanofillers on Tensile Properties and Spherulitic Crystallization in Matrix Phase of Polypropylene Composites

*Ryo Ikegami¹, Mitsuru Tanahashi¹ (1. Toyama Prefectural Univ.)

[P77] Influence of addition of CNF on mechanical properties of stereolithography 3D printing

*Yuki Kotohara¹, Yuki Kikutani¹, Yasushi Arahori¹, Toshiyuki Tsujisaka¹, Hirokazu Yamashita¹ (1. Nara Prefecture Institute of Industrial Development)

[P78] Tensile Properties of Polypropylene Composite Systems with Hydrophilic silica Nanofillers Hybridized with Carbon Blacks by Electrostatic Adsorption Method

*Tatsuki Murase¹, Mitsuru Tanahashi¹ (1. Toyama Prefectural Univ.)

[P79] Improvement in Mechanical Properties of Poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) using Cellulose Nanofiber (CNF)

*Jisuk Lee¹, Kenta Moriyama¹, Yuta Hikima¹, Masahiro Ohshima¹ (1. Kyoto Univ.)

[P80] Fatigue life prediction of bending polymer films by machine learning

*Masayuki Kishino¹, Ryo Taguchi¹, Norihisa Akamatsu¹, Atsushi Shishido¹ (1. Lab. for Chem. & Life Sci., Tokyo Tech)

[P81] Molecular orientation imaging of uniaxially polymer stretching process using polarized near-infrared (NIR) spectroscopy

*Kentaro Mori¹, Yuta Hikima¹, Masahiro Ohshima¹ (1. Kyoto Univ.)

[P82] Elucidation of Crystallization Mechanism of Crosslinked Polyethylene under High Supercooling Conditions

*Naoki Komiyama¹, Yuta Hikima¹, Masahiro Oshima¹ (1. Kyoto Univ.)

[P83] Prediction of recycled PP materials PVT properties using In-mold sensors.

*Kan Kobayashi¹ (1. Hitachi, Ltd.)

[P84] Characterization of antimony-free flame-retardant PBT for selective laser sintering

*SATOSHI ARAI¹, YAMAGUCHI AKIHIRO², HARIGAE MITSURU³ (1. Hitachi Asia (Thailand) Co., Ltd., 2. Hitachi, Ltd., 3. Hitachi High-Tech Manufacturing & Service Corporation)

[P85] Effect of heat treatment of amorphous polymers below the glass transition temperature on relaxation behavior and mechanical properties

*Ayumi Hatano¹, Hiroki Takeshita¹, Kousaku Tao², Katsuhisa Tokumitsu¹ (1. School of Engineering, The University of Shiga Prefecture, 2. Osaka Research Institute of Industrial Science and Technology Morinomiya Center,)

[P86] Crystallization behavior of cyclic and branched polylactic acid

*terakura keigo¹, tokumitsu katsuhisa¹, takeshita hiroki¹, nakajima keiji², ooyama masatoshi² (1. The University of Shiga Prefecture, 2. Industrial Research Center of Shiga Prefecture)

Session information

ポスター（P63～86）