[P-001] Influence of Mixing Ratio of Recycled PBT on Deformation Behavior of Laser Sintered Parts

*Satoshi Ihara¹, Akihiro Yamaguchi¹, Masayuki Okamura¹ (1. Hitachi, LTD)

[P-003] Research on manufacturing method and property improvement of continuous carbon fiber filament for 3D printer

*Kouya Hosokawa¹, Tatsuya Tanaka¹, Masahiro sasada¹ (1. Doshisha Univ)

[P-005] Thermal diffusivity measurements of crystalline resins in the melt state using the TWA method, and their application in injection molding simulation

*KAI SAKAKIBARA¹, RYOTA MORIOKA², SHUJI KAMEGAKI², GEN AOKI¹, YUHSUKE HAMANO¹, JUNKO MORIKAWA² (1. POLYPLASTICS CO., LTD., 2. School of Materials and Chemical Technology, Tokyo Institute of Technology)

[P-007] Effect of Nozzle Temperature and Laminate Pitch during 3D Printing on Mechanical Properties of Continuous Natural Fiber-Reinforced PLA Composites

*Ryuhei Hatada¹, Seiji Mitsubayashi², Kenichi Takemura², Koki Matsumoto³ (1. Graduate School of Kanagawa Univ. , 2. Kanagawa Univ., 3. Fukuoka Univ.)

[P-009] Mechanical Property Improvement of Polycarbonate by Using Fibrous Basic Magnesium Sulfate

*kazuki yoshihara¹, toru inagaki¹, tetsuo takayama² (1. Ube Material Industries,Ltd., 2. Yamagata Univ.)

[P-011] Ion conductance and Mechanical Properties of Diamond Composite PEO Polymer Solid Electrolytes

*Taiyou Nakamura¹, Tsunehisa Suzuki¹, Tatsuya Fujii¹, Mitsuyoshi Nomura¹, Takashi Mineta² (1. Akita Prefectual Univ., 2. Yamagata Univ.)

[P-013] Providing Antistatic Performance to Polyolefin by Novel Permanent Antistatic Agent

*Ryota Owada¹, Yuko Iimori¹, Miho Nagai¹, Kazukiyo Nomura¹ (1. ADEKA Corporation)

[P-015] Evaluation of polishing performance of carbon nanotube composite phenolic bonded grinding wheel by solvent casting method

*Gakuto Iwagami¹, Tsunehisa Suzuki¹, Tatsuya Fujii¹, Mituyoshi Nomura¹ (1. Akita prefectural university)

[P-017] Impact modification of Poly Lactic Acid with reactive polymers

*Toshihisa Takahashi¹, Mutsumi Hirayama¹, Hiroyuki Tobari¹, Yuya Miyazaki¹, Katsuo Susaki¹, Takashi Sanada¹ (1. SUMIKA COLOR CO., LTD.)

[P-019] Molding of FRP using Milled Recycle Carbon Fiber and Its Mechanical Properties

*Shogo Higuchi¹, Rino Yamamoto¹, Shuzo Ikenaga¹, Yosuke Yamazaki¹, Yusuke Imai², Yoshiki Sugimoto², Kazuki Nomura³, Yukihiro Matsumoto¹ (1. Toyohashi Univ., 2. AIST, 3. SOBUE CLAY CO.,LTD.)

[P-021] Improvement of physical properties of polystyrene by cyclic polyphenylene sulfide

*Saori Nara¹, Yuyang Ding², Junsu ParkPark², Ryohei Ikura², Yoshinori Takashima² (1. DIC Corporation, 2. Osaka Univ.)

[P-023] Modification of polypropylene(PP) composites containing cellulose fibers by acid-modified PP.

*Naoya Kubota¹, Hirotaka Kanaya¹ (1. Mitsui Chemicals, Inc.)

[P-025] Study on Liner Materials for High-Pressure Hydrogen Tanks Using ETFE blends

*Naoya Osada¹, Katsuhisa Tokumitu¹, Hiroki Takeshita¹, Takumitsu Kida¹, Shin Nishimura², Mitsuo Shibutani², Hirotada Fujiwara³, Eiiti Nishi⁴ (1. University of Shiga prefecuture, 2. Kyusyu university, 3. ex-Kyusyu university, CERI, 4. AGC Co. Ldt)

[P-027] Mechanical properties of magnetically driven smart grinding tools made of iron oxide composite styrene thermoplastic elastomer

*Kairi Igarashi¹, Tsunehisa Suzuki¹, Tatsuya Fujii¹, Mitsuyoshi Nomura¹ (1. Akita Prefectural Univ.)

[P-029] Structure formation in crystallization of biobased polymers for chemical recycling

*Aki Nishiyama¹, Hiroki Takeshita¹, Takumitsu Kida¹, Katsuhisa Tokumitsu¹, Kotohiro Nomura² (1. Univ. Shiga. Pref., 2. Tokyo Metropolitan Univ.)

[P-031] Evaluation of Mechanical Properties of Biodegradable Plastics Containing Biodegradable Plasticizers

*Masahiro Muto¹ (1. DAIHACHI Chemical Industry Co.,LTD.)

[P-033] The Influence of Soybean based Epoxy as an Additive for Thermoplastic Composites Derived from Tapioca Starch.

*Thanaboon Pansuwan¹, Ken Miyata¹ (1. Yamagata University)

[P-035] Effect of cellulose nanofibers on rice starch recrystallization

*Akemi Sakai¹, Hiroko Yano¹, Tomonori Koda¹, Taichi Nishio¹, Yusuke Tada², Akihiro Nishioka¹ (1. Yamagata University Graduate School of Organic Materials Science Department of Organic Materials Science, 2. Nippon Paper)

[P-039] Effect of adding Ethylene-Glycidyl Methacrylate copolymer on the rheological properties of Recycled PET/Elastomer Blend.

*Yutaro Rai¹, Hiroko Yano¹, Tomonori Koda¹, Taichi Nisihio¹, Akihiro Nishioka¹ (1. Yamagata University Graduate School of Organic Materials Science Department of Organic Materials Science)

[P-041] Effect of Silane Coupling Treatment for Additive Cellulose Nanofibers on Tear Strength of Thermosetting Polyurethane Rubber

*Erika Iihata¹, Tomoya Watanabe², Hiroko Yano², Tomonori Koda², Taichi Nishio², Takamasa Endo³, Noriyuki Sato³, Akihiro Nishioka² (1. Yamagata University Faculty of Engineering Department of Polymeric and Organic Materials Engineering, 2. Yamagata University Graduate School of Organic Materials Science Department of Organic Materials Science, 3. MIYAGI PREFECTURAL GOVERNMENT)

[P-043] Evaluation of Recyclability of polypropylene/cellulose fiber composites

Yamashita Shohei¹, *Shogo Tanaka¹, Daisuke Nakashima¹, Toshiki Yamazaki¹, Kenji Aoki² (1. Fuji Technical Support Center, Industrial Research Institute of Shizuoka Prefecture, 2. Shizuoka Univ.)

[P-045] Estimation of conditions in an injection molding die by using data assimilation and computational fluid dynamics

*Yamato Ohira¹, Takekazu Sawa¹, Yasuhiko Murata² (1. Shibaura Institute of Technology, 2. Nippon Institute of Technology)

[P-047] Analysis of Particle Morphology Change and Thermal History of Marine Degradable Cellulose Micro-particles in a Twin Screw Extruder

*Shogo Nagasawa¹, Masatoshi Ohara³, Makihiro Tuchida², Shin-ichiro Tanifuji⁴, Daisuke Yorifuji⁴, Kentaro Taki¹ (1. Kanazawa Univ., 2. Daicel, 3. SHIBAURA, 4. HASL)

[P-049] Control of the amount of flow modifier added to recycled polypropylene using an in-mold sensor

*Ryotaro Shimada¹, Daisuke Yagi¹, Kazuki Hattori¹, Hiroki Nakatsuchi¹ (1. Hitachi, Ltd.)

[P-051] Effect of VGCF content on electrical properties of PC/VGCF positively forming conductive paths by powder compaction

noboru nakayama¹, *akihisa kunita¹, masaomi horita¹ (1. Shinshu Univ.)

[P-053] Effect of copper phthalocyanine addition on electrical conductivity and viscoelasticity of polystyrene/ (multi-walled carbon nanotube) nanocomposites

*Yui Sugiura¹, Sathish Kumar Sukumaran¹, Masataka Sugimoto¹ (1. Yamagata Univ.)

[P-055] Molecular simulations of the effect of entanglements on chain rotation under fast shear flow

*Koudai Urayama¹, Sathish Kumar Sukumaran¹, Masataka Sugimoto¹, junichi takimoto¹ (1. Yamagata Univ.)

[P-057] Effect of molecular weight of maleic anhydride grafted polypropylene on elongational viscosity of polypropylene/organically modified clay nanocomposites

*Shogo Hachiya¹, Sathish Kumar Sukumaran¹, Masataka Sugimoto¹, Kiyohito Koyama¹ (1. Yamagata Univ.)

[P-059] Study on optimal kneading zone for fiber-reinforced compounds using twin-screw extruder

*Yuki Kawamoto¹, Takashi Sanada¹, Koichi Sano¹, Shozo Suzuki², Hiroshi Momochi² (1. Sumika Color Co., Ltd., 2. Shibaura Machine Co., Ltd.)

[P-061] Effect of elongational flow on the mixing of masterbatch including bio-based filler

*Masahiro Ono¹, Hideyuki Uematsu¹, Shuichi Tanoue¹ (1. Univ. of Fukui)

[P-063] Study on the Breakage of Carbon Fibers in the Kneading Process Using Twin-Screw Extruders

*Shiori Horiguchi¹, Tatsuya Tanaka¹, Masahiro Sasada¹, Takeshi Ishikawa² (1. Doshisha Univ., 2. Mitsubishi Chemical Corporation)

[P-065] Evaluation of marine biodegradability of plastics in actual seas

*Nao Osaka¹, Hironori Taguchi¹, Hirofumi Hinata², Takeoka Hidetaka², Takako Kikuchi¹ (1. Chemicals Evaluation and Research Institute, 2. Ehime University)

[P-067] Analysis of material composition and various physical properties of recycled polystyrene from used home appliances

*Shigeru Kitahata¹ (1. Mitsubishi Electric Corporation)

[P-069] Effect of viscoelasticity on bending creep behavior of polymer films

*Jiayi Yu¹, Masayuki Kishino¹, Kyohei Hisano¹, Atsushi Shishido¹ (1. Tokyo Institute of Technology)

[P-071] Effects of heat treatment on Bio-based Engineering Plastic

*kohei kurihara¹, hideto hata¹, hajime nakajima¹, Hikaru uesugi², katsuhisa tokumitu² (1. Molten Corporation, 2. The University of Shiga Prefecture)

[P-073] Effect of temperature gradient on the concentration change of a miscible blend

*Hirotaka Mitamura¹, Masayuki Yamaguchi¹ (1. Japan Advanced Institute of Science and Technology)

[P-075] Transition behavior in colloidal crystallization of temperature responsive polymer microgel despersion

*Reina Ota¹, Hiroki Takeshita¹, Takumitsu Kida¹, Katsuhisa Tokumitsu¹ (1. The Univ. of Shiga Pref.)

[P-077] Crystalline structure of polypropylene containing a miscible modifier

*Yuta Fukuda¹, Masayuki Yamaguchi¹ (1. Japan Advanced Institute of Science and Technology)

[P-079] Effect of addition new fluidity improver MF-41 to polyamide resin

*Tomoya Hasegawa¹, Haruka Katakura¹, Ayano Ishida¹, Yuki Ouchi¹ (1. OSAKA GAS CHEMICALS )

[P-081] Crystallization behavior and molecular mobility in poly(L-lactic acid) / poly(oxymethylene) blends

*Norihiko Sakaguchi¹, Hiroki Takeshita¹, Yuuka Nagata, Takumitsu Kida¹, Katsuhisa Tokumitsu¹ (1. University of Shiga Prefecture)

[P-083] Study on improvement of physical properties of UV-curable silicon rubber by additionPMPS

*Shoutarou Hata¹, Tokumitu Katuhisa¹, Takesita Hiroki¹, Kida Takumitu¹, Nishino Takahiro², Maeda Asami² (1. University of Shiga Prefecture, 2. Osaka Gas Chemicals Co.,Ltd)

[P-085] Multifactorial Measurements using Bending Fatigue Tester :
Fatigue Analysis of Biaxially Oriented PET Films under Cyclic Bending

*Yusho Kishimoto¹, Kyohei Hisano¹, Atsushi Shishido¹ (1. Tokyo Institute of Technology)

[P-087] The origin and mechanism of mechanical properties of thermoplastic elastomers containing polyethylene

*Taiki Sekoguchi¹, Hiroki Takeshita¹, Takumitsu Kida¹, Katsuhisa Tokumitsu¹, Shojiro Kaita² (1. Univ. of Shiga Pref., 2. BRIDGESTONE Co.)

[P-089] Effects of molecular alignment of main-chain liquid crystalline polymers on vibration damping properties.

*Keigo Sawada¹, Hiroki Takeshita¹, Takumitsu Kida¹, Katsuhisa Tokumitsu¹ (1. The University of Shiga Prefecture)

[P-091] Fatigue Behavior of Triple-layer PET Film with Soft Intermediate Layer under Cyclic Bending

*Hinako Yamashita¹, Yusho Kishimoto¹, Kyohei Hisano¹, Atsushi Shishido¹ (1. Tokyo Institute of Technology)

[P-093] Effect of Surface Composition of Glass Fiber on the Interfacial
Properties of Polypropylene/Glass Fiber Composites

*Rin Kato¹, Ayaka Yamaguchi¹, Hideyuki Uematsu¹, Masatoshi Yamane¹, Shuichi Tanoue¹ (1. Fukui Univ.)

[P-095] Modification of rheological properties for polyamide by addition of reactive compound

*Xianzhu MEI¹, Masayuki YAMAGUCHI¹, Misaki YAMAGUCHI² (1. Japan Advanced Institute of Science and Technology , 2. MITSUBISHI CHEMICAL)

[P-099] Study on color evaluation and improvement of color defects of injection molded products using colored pellets.

*Takumi Suzuki¹, Masahiro Seto¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[P-101] Effect of Anchor Structure and Reinforcing Fibers on Joining Strength of Resin-Metal joined Molded Products

*Shota Yasuda Yasuda¹, Toru Suzuki¹, Masahiro Seto¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[P-103] Measurement of demolding forces on the ribs in injection molding

*Tetsuya Ofusa¹, Fuminobu Kimura¹, Yusuke Kajihara¹ (1. The University of Tokyo)

[P-105] Effect of weld on fatigue properties of polycarbonate injection molded products (Ⅱ)

*Yoshihiro Takai¹, Kazutoshi Nakagawa¹, Noriyuki Fujii¹ (1. MITSUBISHI ELECTRIC CORPORATION)

[P-107] Study on the prevention of molding problems and improvement of mechanical properties at the welding interface in c-FRTP pultrusion/injection hybrid molding.

*TAKUMI Okahashi¹, MASAKI Ohishi², AKIO Ohtani¹ (1. KYOTO Institute of technology, 2. SATOH Group)

[P-109] Study on non-destructive inspection method for water-infiltrated adhesive layer by using terahertz spectroscopy

*Yukihiro Tanida¹, Naoya Kurahashi¹, Shuhei Okada² (1. Kyoto Prefectural Technology Center for Small and Medium Enterprises, 2. Yokogawa Electric Corporation)

[P-111] Effect of Thermal History during Molding on Interfacial Properties in c-FRTP

*Shota Takimoto Takimoto¹, Akio Ohtani¹ (1. Kyoto institute of Technology)

[P-113] Physical property evaluation of carbon compounded rubber in rubber mixing process using supercritical CO₂

*Kosuke HIGASHI Higashi¹, Sachiya Okamoto¹, Masatake Toshima¹, Sayaka Yamada¹, Shinichi Kihara², Ikuo Ushiki², Shigeki Takishima² (1. Kobe Steel, LTD., 2. Hiroshima Univ.)

[P-115] Effect of Screw Shape on Cell Structure in Low-pressure Physical Foam Molding.

*Kazuya Namiki¹, Hiroshi Sato¹, Hiroyuki Kobayashi¹ (1. SANKEI GIKEN KOGYO CO.,LTD.)

[P-117] Effect of reactor blending of low-molecular-weight polyethylene on melt drawability of ultrahigh-molecular-weight polyethylene

*Ayaka Takazawa¹, Masaki Kakiage¹, Takeshi Yamanobe¹, Hiroki Uehara¹, Shinichi Asai², Shoko Naruke², Takuya Ohnishi², Yasutake Wakabayashi² (1. Gunma Univ., 2. Tosoh Co.)

[P-119] Analysis of the relation between substituents and absorption spectrum in fluorene compounds and development of new fluorene-based long-wavelength UV absorbers

*Shogo Suga¹, Yoshiya Ota¹ (1. Osaka Gas Chemicals)

[P-121] Effect of Higher-Order Structure and Physical Properties of Multilayered PS/PBT Sheets with High Pressure Compression

*Akinori Iwamura¹, Yutaka Kobayashi², Shotaro Nishituji¹, Akira Ishigami^1,2, Hiroshi Ito^1,2 (1. Graduate school of Organic Materials Science, Yamagata Univ., 2. Research Center for GREEN Materials and Advanced Processing, Yamagata Univ.)

Sessions

ポスターセッション » 奇数番号

ポスター（奇数番号）

Authentication