[I15-P-01] Soil-buried test of wood plastic composites (WPCs) with various wood percentages
- Assessment of deterioration in 10 years exposure test -

○Masahiko KOBAYASHI¹, Atsuko ISHIKAWA¹, Masahiro MATSUNAGA¹, Kei MAEDA¹, Toru KANBAYASHI¹ (1. FFPRI)

[I15-P-02] Adhesive properties of plywood using phenolic components derived from Japanese cedar bark

○Naoyuki FURUTA¹, Junko Miyazaki¹, Kamii Nakamura¹, Koh Hashida², Eri Takata², Takuya Akiyama³ (1. Hokkaido Inst., 2. FFPRI, 3. The Univ. of Tokyo)

[I15-P-03] Development of resin-impregnated compressed wood as a substitute of endangered wood species used for woodwind instruments

○Yinan Zhang¹, Eiichi Obataya¹, Hiroshi Okumura², Shinichiro Yokota² (1. Univ. of Tsukuba, 2. Risho Kogyo)

[I15-P-04] Effects of physically restoring of recycled plastic materials on mechanical properties of wood plastic recycled composites

○Akane Kusumoto¹, Hiroaki Horiyama², Keisuke Kojiro², Yuzo Furuta², Masako Seki³, Tsunehisa Miki³, Patchiya Phanthong⁴, Shigeru Yao⁴ (1. Kyoto Pref. Univ., 2. Grad., Kyoto Pref. Univ., 3. AIST, 4. Fukuoka Univ.)

[I15-P-05] Characteristics of 3D Printer Filaments Produced from Waste
Wood and Polylactic Acid

○Eun-Ju Lee¹, Dao Kha Giang¹, Yeongyeon Seo¹, Junehwan Yoon¹, Haeeun Yoon¹, Suyeon Jung¹, Eunseo Jung¹, Jae-Won Lee¹ (1. Chonnam National Univ.)

[I15-P-06] Study on Physical and Mechanical Properties of Particleboard Made of Urea Resin Mixed with Phenolic Boron Compound Flame-Retardant

○Byeonghoon Choi¹, Yeongmo Koo¹, Seoggoo Kang¹ (1. Chungnam national Univ.)

[I15-P-07] Nondestructive evaluation of cellulose nanofiber-reinforced composites using terahertz time-domain spectroscopy

○Atsushi Nakanishi¹, Naoko Kanno², Hiroshi Satozono¹ (1. Hamamtsu Photonics, 2. Shizuoka Pref.)

[I15-P-08] Simulation of two-dimensional moisture diffusion in CLT in the process of moisture absorption considering the influence of adhesive layers

○Masato Suga¹, Nobuhiro Asakura¹, Yoshihide Kondo¹, Hiroshi Akitsu¹ (1. Hokkaido Inst.)

[I15-P-09] Quality assessment based on JAS for Sugi CLT with out-of-grade lamina

○Sachiko Asada¹, Satoshi Nagai¹, Yasusuke Miwatari² (1. Hyogo Pre., 2. Shiso no Morinoki)

[I15-P-10] Thermal conductivity measurement of plywood
and wood-based panels

○Nobuhiro ASAKURA¹, Takashi Tanaka², Tatsuya Shibusawa³ (1. Hokkaido Inst., 2. Shizuoka Univ., 3. FFPRI)

[I15-P-11] Examination of horizontal shear test methods for multi-layered structural plywood

○Yasuo OKAZAKI¹, Tatsuya SHIBUSAWA² (1. Akita Pref. Univ. , 2. FFPRI)

[I15-P-12] Estimation and erification of allowable bending radius for laminated wood bending of Japanese cedar

○Yasushi Hano¹, Hiroyuki Okamura¹, Kazutoshi Takeuchi² (1. Fukuoka Pref., 2. Fukuoka Pref.)

[I15-P-13] Relationship between veneer composition and thermal conductivity measured by the hot wire method for materials laminated with veneers of different species.

○Kei MAEDA¹, Masahiro Matsunaga¹, Masahiko Kobayashi¹, Toru Kanbayashi¹, Atsuko Ishikawa¹ (1. FFPRI)

[I15-P-14] Development of a simple device for tensile X-ray CT scanning of wood based materials

○Takashi TANAKA¹ (1. Shizuoka Univ.)

Session information

I Wood-based materials and adhesion