Oral presentation

V. Nuclear Fuel Cycle and Nuclear Materials » 502-1 Nuclear Materials, Degradation, Radiation Effects, and Related Technology

[2C16-21] Nuclear Materials

Wed. Mar 27, 2024 4:25 PM - 6:00 PM Room C (21Bildg.2F 21-205)

Chair:Shinichiro Yamashita(JAEA)

+Add all to schedule

4:25 PM - 4:40 PM

[2C16] Phase separation and recombinaison in U₁₋_yPu_yO₂₋_x with y = 0.30, 0.45, and 1.00

*Romain Jean-Marie Vauchy¹, Masahiro Ogasawara², Tadahisa Yamada², Takeo Sunaoshi², Tetsuya Tamura², Yuta Horii¹, Shun Hirooka¹, Masato Kato¹, Tatsutoshi Murakami¹ (1. Japan Atomic Energy Agency, 2. Inspection Development Company)

4:40 PM - 4:55 PM

[2C17] Development of accident tolerant control rod

(7) Compatibility between novel neutron absorbers and molten fuel at high temperature

*Kinya Nakamura¹, Hirokazu Ohta¹, Masahide Takano² (1. CRIEPI, 2. JAEA)

4:55 PM - 5:10 PM

[2C18] Development of Accident Tolerant Core Materials (1)

Development of Cladding Materials for Early Commercialization ~ Core Materials for Further Safety Improvement

*Soichiro Yamaguchi¹, Tetsuro Yamaoka¹, Toshiki Nishimura¹, Shoko Suyama¹, Masao Owaki¹, Fumiaki Inoue¹ (1. TOSHIBA ESS)

5:10 PM - 5:25 PM

[2C19] Effect of constituents on application conditions of silicon carbide composites

*Tatsuya Hinoki¹, Yansong Zhong¹, Junyeab Lee¹ (1. Kyoto University)

5:25 PM - 5:40 PM

[2C20] Modeling of SiC materials for nuclear energy based on first principles calculations

*Baopu WANG¹, Liangfan Zhu¹, Yuting Chen¹, Hirotomo Iwakiri², Kazunori Morishita¹ (1. Kyoto Univ., 2. Ryukyus Univ.)

5:40 PM - 5:55 PM

[2C21] In search for radiation-resistant high entropy alloys composed by light metal elements

(1) Introduction of the research project

*Kenta Murakami¹, Xinrun Chen², Kin Tan², Tatsuya Suzuki² (1. UTokyo, 2. Nagaoka Univ. of Tech.)

Time reserved for Chair (5:55 PM - 6:00 PM)

Session information

[2C16-21] Nuclear Materials

[2C16] Phase separation and recombinaison in U₁₋_yPu_yO₂₋_x with y = 0.30, 0.45, and 1.00

[2C17] Development of accident tolerant control rod

(7) Compatibility between novel neutron absorbers and molten fuel at high temperature

[2C18] Development of Accident Tolerant Core Materials (1)

Development of Cladding Materials for Early Commercialization ~ Core Materials for Further Safety Improvement

[2C19] Effect of constituents on application conditions of silicon carbide composites

[2C20] Modeling of SiC materials for nuclear energy based on first principles calculations

[2C21] In search for radiation-resistant high entropy alloys composed by light metal elements

(1) Introduction of the research project

Authentication

Session information

[2C16-21] Nuclear Materials

[2C16] Phase separation and recombinaison in U1−yPuyO2−x with y = 0.30, 0.45, and 1.00

[2C17] Development of accident tolerant control rod

(7) Compatibility between novel neutron absorbers and molten fuel at high temperature

[2C18] Development of Accident Tolerant Core Materials (1)

Development of Cladding Materials for Early Commercialization ~ Core Materials for Further Safety Improvement

[2C19] Effect of constituents on application conditions of silicon carbide composites

[2C20] Modeling of SiC materials for nuclear energy based on first principles calculations

[2C21] In search for radiation-resistant high entropy alloys composed by light metal elements

(1) Introduction of the research project

Authentication

[2C16] Phase separation and recombinaison in U₁₋_yPu_yO₂₋_x with y = 0.30, 0.45, and 1.00