杭基礎⑦

Tue. Jul 13, 2021 2:45 PM - 4:15 PM 第8 (Zoom)

座長：磯部公一（北海道大学大学院）

+Add all to schedule

[13-8-4-01] Load history of cedar remains in the Funaya area of the Mietsu Naval Facility

*SUZUKI NAOFUMI¹, Takaharu Shogaki², Yoshihito Nakano¹ (1. Kowa Co.,Ltd., 2. Eurasian National University)

[13-8-4-02] Current status of pull-out technologies of existing pile in China

*JIAHAO SHI¹, Shinya Inazumi¹, Syuichi Kuwahara² (1. Shibaura Institute of Technology, 2. Japan Association for Pulling-out Existing Piles)

[13-8-4-03] Ultimate vertical bearing capacity of logs estimated from cone penetration test

*MURATA TAKUMI¹, ATSUNORI NUMATA¹, SYUUHEI SASAKI², ATSUSHI KAWASAKI³, KOUHEI SUGIYAMA³ (1. Tobishima Corporation, 2. Sumitomo Forestry Corporation, 3. Misawa Homes)

[13-8-4-04] Prediction Method of Bearing Stratum for Piles via Microtremor Measurement and Kriging Method

*Rihito Kojima¹, Yoshinori Hagiwara¹, Shinichi Takahashi¹, Kazuhiro Watanabe¹ (1. Obayashi Corporation)

[13-8-4-05] A Case Study on Construction Management of Pile Driving for Steel Pipe Pile by the Modified Hiley’s Formula based on Dynamic Load Test Results.

*SAEGUSA HIROYUKI¹, Kani Masaya¹, Fujita Toru², Takeuchi Yasuhiro², Mizutani Takaaki³ (1. TOA Cprporation, 2. Ministry of Land, Infrastructure, Transport and Tourism, 3. Port and Airport Research Institute)

[13-8-4-06] Confirmation technology for detection of bearing layer by pile inner excavation method

*DAISUKE IIZUKA¹, Kazunori Inazumi¹, Tatsuya Komazawa² (1. Obayashi, 2. Nihon Base)

[13-8-4-07] Analytical study on fill ability of backfill materials in hole of pulled out existing piles filled with drilling muddy water

*TOMOKI UEHARA¹, Shinya Inazumi¹, Kazuya Saida², Kenichirou Yabe² (1. Shibaura Institute of Technology, 2. Kao Corporation)

[13-8-4-08] A Case of Existing Pile Removal and Backfill Using Cement and Bentonite Water
–Spiral auger and air blow mixing method-

*ZHANG YUAN¹, Yasushi Furugaichi¹, Kenjiro Kawasaki¹ (1. Tokyu Construction)

Session information