General Session

[G] Surface, Interface, and Catalysts

Thu. Mar 19, 2020 9:00 AM - 4:40 PM Rm. C (W331,3rd Flr., West Bldg.3)

Chair:Hiromi YAMASHITA

9:00～中山栄浩
10:00～三浦一真
10:55～森園靖浩
13:00～山下弘巳
14:00～佐藤一則
15:10～八木俊介
15:55～森浩亮

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間５分、基調講演と外国人特別講演は5～10分）

+Add all to schedule

9:00 AM - 9:15 AM

[103] Friction induced crystal growth of two-dimensional layered MoS₂ on various substrate

*Osaki Junya¹, Tanabe Tadao², Oyama Yutaka² (1. 東北大工（学生）、2. 東北大工)

9:15 AM - 9:30 AM

[104] Influence of annealing in air on the mechanical properties and microstructure of CrN-SiCN coatings

*SAKURAI Akihiko¹, Tsutiya Taiki², Matsuda Kenji², Shiojiri Makoto³, Kawasaki Masahiro⁴, Ikeno Susumu⁵, Nose Masateru⁵, Lee Seungwon² (1. University of Toyama, 2. University of Toyama, 3. Professor emeritus Kyoto Institute of Technology, 4. Applied Materials, Inc., 5. Professor emeritus University of Toyama)

9:30 AM - 9:45 AM

[105] Microstructural changes in iron oxide heated in mixtures of iron and graphite powders

*MATSUO Seiya¹, MORIZONO Yasuhiro², YAMAMURO Takateru³, TSUREKAWA Sadahiro⁴ (1. 久留米高専（専攻科生）、2. 久留米高専、3. 熊本大工、4. 熊本大院先端科学)

9:45 AM - 10:00 AM

[106] Effect of iron powder-free area applied to iron-powder carburizing process

*TOYOFUKU Tomoya¹, MORIZONO Yasuhiro², YAMAMURO Takateru³, TSUREKAWA Sadahiro⁴ (1. 久留米高専（専攻科生）、2. 久留米高専、3. 熊本大工、4. 熊本大院先端科学)

10:00 AM - 10:15 AM

[107] Formation of Highly Adhesive Carbon Film on Metal Surface by Pulse Electrodeposition in Molten Salt

*Zhuang Chongrui¹, Lu Xin², Takeda Osamu², Zhu Hongmin² (1. Master course, Graduate School of Engineering,Tohoku University, 2. Graduate School of Engineering,Tohoku University)

10:15 AM - 10:30 AM

[108] Effects of Sulfonitriding Treatment for Non-lubrication Wear of Carbon Steel Gears

*HORIE Kazuya¹, Nanko Makoto², Nishiwaki Satoru³ (1. Nagaoka Univ. of Tech., 2. Nagaoka Univ. of Tech., 3. Nagaoka Denshi)

10:30 AM - 10:45 AM

[109] Effect of bias voltage on nitriding behavior of
304 stainless steel using die-pole plasma nitriding apparatus

*Maeda Kenta¹, Nakayama Yoshihiro², Saruwatari Naohiro², Sugita Yoshio³, Sekiya Eiji³ (1. University of Yamanashi(graduate student), 2. University of Yamanashi, 3. YS DENSHI Co.,Ltd)

Break （10:45 AM - 10:55 AM）

10:55 AM - 11:10 AM

[110] Electrochemical cilisiding of carbon inside ceramic composites

*Nakamura Masakiyo¹, Lu Xin², Takeda Osamu², Zhu Hongmin² (1. Tohoku univ., 2. Tohoku univ.)

11:10 AM - 11:25 AM

[111] Study on Dispersion Composite to Plated Membrane of Nanoparticles

*MIURA Kazuma¹, HAYASHI Narumi¹, NAKAGAWA Masayuki¹, KOBAYASHI Yasunori¹, KUDOU Koichi², TAKEE Yoshiki², KONISHI Motoyuki³, KONISHI Motoo³, MATSUBARA Hiroshi⁴ (1. Industrial Research Institute of Niigata Prefecture, 2. Nihon Mekki Industry Co.,Ltd, 3. Konishi Plating Co.,Ltd, 4. Nagaoka University of Technology)

11:25 AM - 11:40 AM

[112] Microstructure and Wear Resistance Properties of Ni-P Multilayered Deposited Films

*AOYAGI Takuya¹, KANEMOTO Hiroshi¹, KAWAMURA Toshinori¹ (1. Hitachi, Ltd)

11:40 AM - 11:55 AM

[113] Synthesis of Porous SiO₂-CaO Composite from Blast Furnace Slag and Its Application in CO₂ Adsorption

*HANAKI Aiko¹, KUWAHARA Yasutaka^2,3,4, YAMASHITA Hiromi^2,3 (1. Osaka Univ., 2. Osaka Univ., 3. ESICB, Kyoto Univ., 4. JST PRESTO)

Lunch （11:55 AM - 1:00 PM）

1:00 PM - 1:30 PM

[114] [功績賞受賞講演] Liquid-phase Synthesis of Metals and Metallic Oxides Based on Electrochemical Methods and Applications for Energy Conversion/Storage Materials

*YAGI Shunsuke¹ (1. Institute of Industrial Science, The University of Tokyo)

1:30 PM - 1:45 PM

[115] DFT values of the surface O vacancy formation energy in 67 θ-Al₂O₃ and β-Ga₂O₃ terminations

*HINUMA Yoyo^1,2, KAMACHI Takashi^3,4, HAMAMOTO Nobutsugu³ (1. 千葉大先進、2. 物材機構MaDIS-MI2I、3. 福岡工大、4. 京大触媒電池)

1:45 PM - 2:00 PM

[116] Combined Effect of Nobel Metal Auxiliary Catalysts on the CO₂ Reduction by CeO₂-based Photocatalyst

YAMADA Tomohide¹, *YAMAMOTO Kazuhiro², SAITO Nobuo², SATO Kazunori² (1. Nagaoka Univ. Tech., 2. Nagaoka Univ. Tech.)

2:00 PM - 2:15 PM

[117] Synthesis of Hollow Silica Encapsulating Pd Alloy Nanoparticles Using N-containing Polymer and Its Application in CO₂ Reduction Reaction

*KUWAHARA Yasutaka^1,2,3, FUJIE Yuki¹, YAMASHITA Hiromi^1,2 (1. Graduate School of Engineering, Osaka University, 2. ESICB, Kyoto University, 3. JST PRESTO)

2:15 PM - 2:30 PM

[118] Development of Supported High-Entropy Alloy Nanoparticle Catalyst and CO₂ Hydrogenation Activity

*HASHIMOTO Naoki¹, MORI Kohsuke^2,3, YAMASHITA Hiromi^2,3 (1. Osaka Univ., 2. Osaka Univ., 3. ESICB Kyoto Univ.)

2:30 PM - 2:45 PM

[119] Effect of Cr on the Dehydrogenation of Formic Acid by Supported PdCu Nanoparticle Catalyst

*MORI Kohsuke^1,2, NAKA Kohei³, MASUDA Shinya³, YAMASHITA Hiromi^1,2 (1. 阪大院工、2. 京大触媒電池、3. 阪大院工（院生）)

2:45 PM - 3:00 PM

[120] Catalytic activity of MXene on oxygen reduction reaction and
formic acid dehydrogenation reaction

*KUNISADA Yuji¹, SAKAGUCHI Norihito¹ (1. Hokkaido Univ.)

Break （3:00 PM - 3:10 PM）

3:10 PM - 3:25 PM

[121] Synthesis of Immiscible RhCu Alloy Catalyst on TiO₂ and Investigation of Alloy Formation Mechanism

*SHUN Kazuki¹, MASUDA Shinya², MORI Kohsuke^2,3, KUWAHARA Yasutaka^2,3,4, YAMASHITA Hiromi^2,3 (1. Osaka Univ., 2. Osaka Univ., 3. ESICB, Kyoto Univ., 4. JST PRESTO)

3:25 PM - 3:40 PM

[122] The hydrogenation of alkyne over ErNi_5-xAl_x alloys and the contribution of absorbed hydrogen

*TSUKUDA Ryota¹, KOJIMA Takayuki^2,3, KAMEOKA Satoshi², NISHIMURA Chikashi⁴, Tsai An-Pang² (1. Graduate School of Engineering, Tohoku University, 2. Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 3. Frontier Research Institute for Interdisciplinary Science, Tohoku University, 4. National Institute for Materials Science)

3:40 PM - 3:55 PM

[123] Structural Changes and Catalytic Properties of Heusler Alloys in Steam Reforming of Methanol

*KOJIMA Takayuki^1,2, KAMEOKA Satoshi², Tsai An-Pang² (1. FRIS, Tohoku Univ., 2. IMRAM, Tohoku Univ.)

3:55 PM - 4:10 PM

[124] Nanocarbon formation behaviors on super saturated solid solution Cu-Fe alloys

*Masuko Naoyuki^1,2, Kameoka Satoshi², Tsai An-Pang² (1. Tohoku Univ., 2. IMRAM)

4:10 PM - 4:25 PM

[125] The catalyst properties of Order-Disorder Au-Cu alloys

*Itabasi Hiroki^1,2, Kameoka satoshi², Tsai An-Pang² (1. Tohoku Univ., 2. IMRAM)

4:25 PM - 4:40 PM

[126] Characterization of metal foil catalysts by EBSD

*HAYASHI Kenta¹, KAMEOKA SATOSHI², TSAI ANPANG² (1. Touhoku Univ., 2. IMRAM)

Sessions

5.Materials Chemistry » Surface and Interface