公募シンポジウム講演

[S5] S5.Materials Science of Additive Manufacturing(3)

Fri. Sep 23, 2022 1:15 PM - 4:30 PM Rm. N (C31,3Flr. Build.C)

Chair:Masayuki OKUGAWA(Osaka University)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

+Add all to schedule

1:15 PM - 1:55 PM

[S5.36] Reducing porosity in electron beam powder bed fusion via controlling powder characteristics and solidification mechanism

*Kenta Yamanaka¹, Yujie Cui¹, Yufan Zhao², Manami Mori^1,3, Jérôme Adrien⁴, Eric Maire⁴, Damien Fabrègue⁴, Akihiko Chiba¹ (1. 東北大金研、2. 東北大金研（現：西北工業大）、3. 仙台高専、4. INSA Lyon)

1:55 PM - 2:10 PM

[S5.37] Electron beam additive manufacturing of β-containing TiAl alloys

*Ken CHO¹, Tatsuhiro HAYASHI¹, Hiroyuki YASUDA¹, Masao TAKEYAMA², Takayoshi NAKANO¹ (1. Osaka Univ., 2. Tokyo Inst. Technol.)

2:10 PM - 2:25 PM

[S5.38] Multi-material melting of Fe/Al alloy by controlling concentration field at melt pool liquid/solid interface in powder based additive manufacturing

*Yujie CUI¹, Jiaxiang Li¹, Yu-shen Chen², Kenta Aoyagi¹, Kenta Yamanaka¹, Akihiko Chiba¹ (1. Institute for Materials Research, Tohoku University, 2. Graduate School of Engineering, Tohoku University)

2:25 PM - 2:45 PM

[S5.39] Effects of plasma spheroidization on the characteristic of MoSiBTiC powders produced by freeze-dry pulsated orifice ejection method (FD-POEM)

*Zhenxing ZHOU¹, Weiwei ZHOU¹, Naoyuki NOMURA¹ (1. Department of Materials Processing, Graduate School of Engineering, Tohoku University)

2:45 PM - 3:05 PM

[S5.40] Microstructure and mechanical properties of Al-Fe-Cu alloy manufactured by laser powder bed fusion

*Takanobu MIYAWAKI¹, Wenyuan WANG¹, Naoki TAKATA², Asuka SUZUKI², Makoto KOBASHI², Masaki KATO³ (1. 名大工（院生）、2. 名大工、3. あいち産技セ)

break (3:05 PM - 3:15 PM)

3:15 PM - 3:35 PM

[S5.41] Science of Heterogeneous Nucleation in Additive Manufacturing

*Yoshimi WATANABE¹, Hisashi SATO¹ (1. Nagoya Institute of Technology)

3:35 PM - 3:55 PM

[S5.42] Effect of laser conditions on aging hardening of Al–12Si alloy additive-manufactured by laser powder bed fusion

*Keito SAKI¹, Naoki TAKATA², Asuka SUZUKI², Makoto KOBASHI², Masaki KATO³ (1. 名古屋大工（院生）、2. 名古屋大工、3. 産総研)

3:55 PM - 4:15 PM

[S5.43] Microstructure and high-temperature strength of Al-Fe-Mn ternary alloy additive manufactured by laser powder bed fusion

*Wenyuan WANG¹, Naoki TAKATA¹, Asuka SUZUKI¹, Makoto KOBASHI¹, Masaki KATO² (1. Nagoya Univ., 2. Aichi Center for Industry and Science Technology)

4:15 PM - 4:30 PM

[S5.44] Fabrication of AlSi10Mg/SiC composite by lase-powder bed fusion process and interface reaction of Al4SiC4

*Hiroaki MATSUMOTO¹, Yuta YANASE¹, Daijiro HASHIMOTO¹, Hajime MIYAUCHI², Kozo YOKOTA² (1. Kagawa Univ., 2. Kagawa Prefectural Industrial Technology Center)

Session information