[29p-D2-1~19] 4.7 Laser processing

Fri. Mar 29, 2013 1:30 PM - 7:00 PM D2 (C5 3F-5310)

△：Young Scientist Oral Presentation Award Applied
▲：English Presentation
▼：Both Award Applied and English Presentation

+Add all to schedule

[29p-D2-0] Lunch(80min)

[29p-D2-1] △Spectroscopy of plasma produced by single-pulse laser irradiation in water without time-gated detection

^○Ayumu Matsumoto¹, Ayaka Tamura¹, Kazuhiro Fukami¹, Yukio H. Ogata¹, Tetsuo Sakka² (Inst. Adv. Energy, Kyoto Univ.¹, Grad. School of Eng., Kyoto Univ.²)

[29p-D2-2] △Behavior of emission from laser plasma produced by short-interval double-pulse irradiation in water

^○Ayaka Tamura¹, Ayumu Matsumoto¹, Yu Qin¹, Takashi Nakajima¹, Kazuhiro Fukami¹, Yukio H. Ogata¹, Tetsuo Sakka² (Inst. Adv. Energy, Kyoto Univ.¹, Grad. School of Eng., Kyoto Univ.²)

[29p-D2-3] △Fabrication and optical properties evaluation of the Sb-doped ZnO nanorods by UV laser doping

^○Taihei ofuji¹, Tetsuya Shimogaki¹, Kota Okazaki¹, Mitsuhiro Higashihata¹, Hiroshi Ikenoue¹, Daisuke Nakamura¹, Tatsuo Okada¹ (Kyushu Univ.¹)

[29p-D2-4] △Application of High Repetition Rate KrF Excimer Laser to Post Annealing Process of P-implanted ZnO Nanorods

^○（M2）Tetsuya Shimogaki¹, Taihei Ofuji¹, Norihiro Tetsuyama¹, Kota Okazaki¹, Mitsuhiro Higashihata¹, Hiroshi Ikenoue¹, Daisuke Nakamura¹, Tanemasa Asano¹, Tatsuo Okada¹ (Information Science and Electrical Engineering, Kyushu Univ.¹)

[29p-D2-5] △Effects of laser peening on crystal state controlled carbon steels

^○（D）Miho Tsuyama¹, Kohei Mizuta¹, Yukio Miyamoto¹, Toshiya Shibayanagi², Masahiro Tsukamoto³, Hitoshi Nakano¹ (Sch. of Sci. and Eng., Kinki Univ.¹, Faculty of Engineering, Toyama University.², JWRI, Osaka Univ.³)

[29p-D2-6] △Influence of cell spreading for periodic nanostructures on TiO2 film formed by femtosecond laser irradiation

^○（D）Togo Shinonaga¹, Masahiro Tsukamoto², Ryosuke Nishii³, Naoto Horigutchi¹, Akiko Nagai⁴, Kimihiro Yamashita⁴, Takao Hanawa⁴, Nobuhiro Matsushita⁵, Guoqiang Xie⁶, Nobuyuki Abe² (Grad. Sch. of Eng., Osaka Univ.¹, JWRI, Osaka Univ.², Sch. of Sci. and Eng., Kinki Univ.³, Inst. of Biomat. and Bioeng., Tokyo Med. and Dent. Univ.⁴, Mat. and St. Lab., Tokyo Inst. of Tech.⁵, Inst. for Materials Research, Tohoku Univ.⁶)

[29p-D2-7] △Raman micro spectroscopy on cross-linked PMMA nanowires formed by 2-photon fabrication method

^○Natsuo Taguchi¹, Satoru Shoji¹, Shota Ushiba¹, Satoshi Kawata¹ (Osaka Univ.¹)

[29p-D2-7.1] Break(15min)

[29p-D2-8] Fabrication of metamaterials by interfering laser processing with phase and intensity variation II

^○Yoshiki Nakata¹, Yoshiki Matsuba¹, Keiichi Murakawa¹, Noriaki Miyanaga¹ (Osaka Univ.¹)

[29p-D2-9] ▲Experimental and theoretical investigation of physical mechanism of ultrafast laser glass microwelding

^○Wu Sizhu¹, Koji Sugioka¹, Midorikawa Katsumi¹ (RIKEN¹)

[29p-D2-10] ▲Space-selective metallization in three-dimensional microfluidic structures inside glasses using femtosecond laser

^○（PC）Jian Xu¹, Dong Wu¹, Sizhu Wu¹, Koji Sugioka¹, Katsumi Midorikawa¹ (RIKEN¹)

[29p-D2-11] ▲3D functional microfludic chips with both mixing and filtering functions by hybrid femtosecond laser microfabrication

^○Wu Dong¹, Koji Sugioka¹, Midorikawa Katsumi¹ (RIKEN¹)

[29p-D2-12] Observation of Plume Dynamics on Graphite under Irradiation of nanosecond UV Laser Pulses in the Air

^○Yoshizo Kawaguchi¹, Tadatake Sato¹, Aiko Narazaki¹, Ryozo Kurosaki¹, Hiroyuki Niino¹ (AIST¹)

[29p-D2-13] Laser-Ionization Time-of-Flight Mass Spectrometric Studies on the Plume of KrF Laser Ablation of CFRP

^○Aiko Narazaki¹, Tadatake Sato¹, Ryozo Kurosaki¹, Yoshizo Kawaguchi¹, Hiroyuki Niino¹ (AIST¹)

[29p-D2-13.1] Break(15min)

[29p-D2-14] Estimations of Multi-dimensional Effects on Laser Peening

^○Hiroyuki Furukawa¹, Manabu Heya², Hitoshi Nakano³ (Inst. Laser Tech.¹, Osaka Sangyo Univ.², Kinki Univ.³)

[29p-D2-15] Effects of Numerical Aperture of Laser Irradiation System on Laser Peening

^○Kohei Mizuta¹, Yasuteru Kodama¹, Yukio Miyamoto¹, Hiroki Okada¹, Miho Tsuyama¹, Manabu Heya², Masahiro Tsukamoto³, Toshiya Shibayanagi⁴, Hitoshi Nakano¹ (Kinki Univ.¹, Osaka Sangyo Univ.², JWRI, Osaka Univ.³, Toyama Univ.⁴)

[29p-D2-16] Material dependent femtosecond laser ablation process observed by soft x-ray laser

^○Takashi Eyama¹, Syodai Takayoshi¹, Takurou Tomita¹, Masaharu Nishikino², Noboru Hasegawa², Yasuo Minami³, Ryota Takei³, Motoyoshi Baba³, Yusuke Hirano², Takeshi Kaihori², Toshimasa Morita², Tetsuya Kawachi², Mitsuru Yamagiwa², Tohru Suemoto³ (STS The Univ. of Tokushima¹, QuBS JAEA², ISSP The Univ. of Tokyo³)

[29p-D2-17] Observation of femtosecond laser ablation of Platinum sample by soft x-ray laser interferometory

^○Masaharu Nishikino¹, Noboru Hasegawa¹, Takuro Tomita², Yasuo Minami³, Ryota Takei³, Kouta Terakawa³, Takashi Eyama², Syodai Takayoshi², Tetsuya Kawachi¹, Mitsuru Yamagiwa¹, Motoyoshi Baba³, Tohru Suemoto³ (QuBS JAEA¹, STS The Univ. of Tokushima², ISSP The Univ. of Tokyo³)

[29p-D2-18] Mechanism of nanograting formation on GaN by femtosecond laser ablation

^○Godai Miyaji¹, Kenzo Miyazaki¹ (IAE, Kyoto Univ.¹)

[29p-D2-19] Measurement of temperature dynamics by time-resolved micro-Raman spectroscopy during high repetition rate ultrafast laser microprocessing

^○Fumiya Hashimoto¹, Sören Richter², Nolte Stefan², Yasuyuki Ozeki¹, Kazuyoshi Itoh¹ (Osaka Univ.¹, Friedrich Schiller Univ.²)

Session information

[29p-D2-1~19] 4.7 Laser processing