Oral presentation

[12p-A1-1~13] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

Thu. Mar 12, 2015 2:00 PM - 5:30 PM A1 (6A-105)

△：Young Scientist Oral Presentation Award Applied
▲：English Presentation
▼：Both Award Applied and English Presentation

+Add all to schedule

2:00 PM - 2:15 PM

[12p-A1-1] Fabrication of high-quality EuBa2Cu3O7 thin films with nano-rods

〇Yosuke Takai¹, Masashi Mukaida¹, Masaki Miura², Ataru Ichinose³, Tetsuro Sueyoshi⁴, Takanori Fujiyoshi⁴ (1.Kyushu Univ., 2.FANUC, 3.CRIEPI, 4.Kumamoto Univ.)

2:15 PM - 2:30 PM

[12p-A1-2] Incorporation of Hybrid APCs into YBCO films using Multilayer Method

〇Tomoya Horide¹, Nobuhiro Sakamoto¹, Manabu Ishimaru¹, Ataru Ichinose², Kaname Matsumoto¹ (1.Kyushu Inst. Technol., 2.CRIEPI)

2:30 PM - 2:45 PM

▲ [12p-A1-3] Tuning the angular variation of J_C of YBCO thin films by incorporating different combinations of hybrid APCs

〇(P)Alok Jha¹, Kaname Matsumoto¹, Tomoya Horide¹, Shrikant Saini², Paolo Mele², Yutaka Yoshida³, Satoshi Awaji⁴ (1.Kyushu Instt Technol, 2.Hiroshima Univ., 3.Nagoya Univ., 4.Tohoku Univ.)

2:45 PM - 3:00 PM

[12p-A1-4] Modeling of Angular Dependent Jc in REBCO Films with Artificial Pinning Centers

〇Kaname Matsumoto¹, Jha Alok¹, Horide Tomoya¹ (1.Kyushu Inst. Technol.)

3:00 PM - 3:15 PM

[12p-A1-5] Irreversibility Fields in Hg Based Epitaxial Superconducting Films

〇Kaname Matsumoto¹, taku Kato¹, Tomoya Horide¹, Yutaka Yoshida², Satoshi Awaji³, Yoshihiko Takano⁴ (1.Kyushu Inst. Technol., 2.Nagoya Univ., 3.Tohoku Univ., 4.NIMS)

3:15 PM - 3:30 PM

[12p-A1-6] Strain effect in infinite-layer superconducting Sr_1-xLa_xCuO₂a-axis thin films

〇Masataka Ito¹, HE YILUN¹, Hajiri Tetsuya¹, Ueda Kenji¹, Asano Hidefumi¹ (1.Nagoya Univ.)

Break （3:30 PM - 3:45 PM）

3:45 PM - 4:00 PM

[12p-A1-7] Investigation for BMO self-organization within REBCO thin film by means of thin film growth simulation

〇Yusuke Ichino^1,², Yutaka Yoshida² (1.EcoTopia Sci. Inst., Nagoya Univ., 2.Nagoya Univ.)

4:00 PM - 4:15 PM

[12p-A1-8] Mechanism of crystal orientation of a buffer layer at the interface with a lattice mismatch (II)

〇Ataru Ichinose^1,³, Jyunpei Naka², Takayuki Uchima², Shigeru Horii^2,³, Toshiya Doi^2,³ (1.CRIEPI, 2.Kyoto University, 3.JST-ALCA)

4:15 PM - 4:30 PM

[12p-A1-9] Influence of heating rate on the crystallinity and superconducting properties in TFA-MOD (Y_0.77Gd_0.23)Ba₂Cu₃O_y coated conductors

〇Nobuhiro Niwa¹, Michio Sato¹, Masashi Miura¹, Yuji Takagi², Koichi Nakaoka², Masateru Yoshizumi², Teruo Izumi² (1.Seikei Univ., 2.ISTEC-SRL&iSTERA)

4:30 PM - 4:45 PM

[12p-A1-10] Influence of oxygen annealing temperature on the in-field properties of TFA-MOD (Y_0.77Gd_0.23)Ba₂Cu₃O_7-δ coated conductors

〇Tsubasa Seki¹, Nobuhiro Niwa¹, Michio Sato¹, Masashi Miura¹, Yuji Takagi², Koichi Nakaoka², Masateru Yoshizumi², Teruo Izumi² (1.Seikei univ, 2.ISTEC-SRL&iSTERA)

4:45 PM - 5:00 PM

△ [12p-A1-11] Influence of the grain-boundary angle on the in-field critical current density in TFA-MOD Y_0.77Gd_0.23Ba₂Cu₃O_y CCs

〇Michio Sato¹, Seki Tsubasa¹, Miura Masashi¹, Takagi Yuji², Nakaoka Kouichi², Yoshizumi Masateru², Izumi Teruo² (1.Seikei Univ., 2.ISTEC-SRL&iSTERA)

5:00 PM - 5:15 PM

△ [12p-A1-12] REBa2Cu3O7-x thin films fired under magnetic field by TFA-MOD method

〇Mariko Hayashi¹, Takeshi Araki¹, Hiroyuki Fuke¹ (1.Toshiba R&D Center)

5:15 PM - 5:30 PM

[12p-A1-13] Minimization of BaHfO₃ flux pinning centers in YBa₂Cu₃O_y films by TFA-MOD method

〇Ryo Teranishi¹, Hiroshi Horita¹, Kazuhiro Yamada¹, Kenji Kaneko¹, Masateru Yoshizumi², Teruo Izumi² (1.Kyushu Univ., 2.SRL-ISTEC)

Oral presentation

[13p-A1-1~8] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

Fri. Mar 13, 2015 12:00 PM - 7:00 PM A1 (6A-105)

△：Young Scientist Oral Presentation Award Applied
▲：English Presentation
▼：Both Award Applied and English Presentation

+Add all to schedule

12:00 PM - 12:15 PM

[13p-A1-1] T_c mechanism in Fe(Te,Se) films deposited under various PLD conditions

〇Tomoya Horide¹, Masahiro Sanyoushi¹, Ataru Ichinose², Kaname Matsumoto¹ (1.Kyushu Inst. Technol., 2.CRIEPI)

12:15 PM - 12:30 PM

[13p-A1-2] x-dependence of microstructure at the interface between FeSe_1-xTe_x and CaF₂ substrate

〇Ichiro Tsukada¹, Ataru Ichinose¹, Fuyuki Nabeshima², Yoshinori Imai², Atsutaka Maeda² (1.CRIEPI, 2.The Univ. of Tokyo)

12:30 PM - 12:45 PM

△ [13p-A1-3] Fabrication and Transport Properties of (FeSe)_m(FeTe)_n Superlattice Films

〇(DC)Fuyuki Nabeshima¹, Yuichi Sawada¹, Yoshinori Imai¹, Masafumi Hanawa², Ataru Ichinose², Ichiro Tsukada², Atsutaka Maeda¹ (1.Univ. of Tokyo, 2.CRIEPI)

12:45 PM - 1:00 PM

[13p-A1-4] Comparison of various fluorine sources on SmFeAs(O,F) film by MBE growth

〇Takanobu Tsuneki¹, Masahito Sakoda¹, Akihiro Ishii¹, Daiki Watanabe¹, Michio Naito¹ (1.Tokyo Univ. of A & T)

1:00 PM - 1:15 PM

[13p-A1-5] Fabrication of laminated film and junction of iron based superconductor SmFeAs(O,F) grown by molecular beam epitaxy (2)

〇Masahito Sakoda¹, Takanobu Tsuneki¹, Akihiro Ishii¹, Daiki Watanabe¹, Michio Naito¹ (1.TUAT)

1:15 PM - 1:30 PM

[13p-A1-6] Optimaization of MgB₂ Josephson junctions with calcium fluoride barriers

〇Kazuya Mede¹, Masahito Sakoda¹, Michio Naito¹ (1.TUAT)

1:30 PM - 1:45 PM

[13p-A1-7] Annealing effects of MgB₂ thin films fabricated by electron-beam deposition

〇Hiroto Takehara¹, Shota Aoki¹, Shigeru Horii¹, Toshiya Doi¹, Toshiaki Kusunoki², Akiyasu Yamamoto³, Junichi Shimoyama³, Koji Kishio³ (1.Kyoto Univ., 2.Hitachi Ltd., 3.Univ. Tokyo)

1:45 PM - 2:00 PM

[13p-A1-8] MgB₂ wires fabricated with boron powders coated with nano-carbon by pyrolysis of coronene

〇Hiroaki Kumakura¹, Shujun Ye¹, Akiyoshi Matsumoto¹, Akira Hasegawa¹ (1.NIMS)

Sessions

11 Superconductivity » 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[12p-A1-1~13] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[12p-A1-1] Fabrication of high-quality EuBa2Cu3O7 thin films with nano-rods

[12p-A1-2] Incorporation of Hybrid APCs into YBCO films using Multilayer Method

▲ [12p-A1-3] Tuning the angular variation of J_C of YBCO thin films by incorporating different combinations of hybrid APCs

[12p-A1-4] Modeling of Angular Dependent Jc in REBCO Films with Artificial Pinning Centers

[12p-A1-5] Irreversibility Fields in Hg Based Epitaxial Superconducting Films

[12p-A1-6] Strain effect in infinite-layer superconducting Sr_1-xLa_xCuO₂a-axis thin films

[12p-A1-7] Investigation for BMO self-organization within REBCO thin film by means of thin film growth simulation

[12p-A1-8] Mechanism of crystal orientation of a buffer layer at the interface with a lattice mismatch (II)

[12p-A1-9] Influence of heating rate on the crystallinity and superconducting properties in TFA-MOD (Y_0.77Gd_0.23)Ba₂Cu₃O_y coated conductors

[12p-A1-10] Influence of oxygen annealing temperature on the in-field properties of TFA-MOD (Y_0.77Gd_0.23)Ba₂Cu₃O_7-δ coated conductors

△ [12p-A1-11] Influence of the grain-boundary angle on the in-field critical current density in TFA-MOD Y_0.77Gd_0.23Ba₂Cu₃O_y CCs

△ [12p-A1-12] REBa2Cu3O7-x thin films fired under magnetic field by TFA-MOD method

[12p-A1-13] Minimization of BaHfO₃ flux pinning centers in YBa₂Cu₃O_y films by TFA-MOD method

[13p-A1-1~8] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[13p-A1-1] T_c mechanism in Fe(Te,Se) films deposited under various PLD conditions

[13p-A1-2] x-dependence of microstructure at the interface between FeSe_1-xTe_x and CaF₂ substrate

△ [13p-A1-3] Fabrication and Transport Properties of (FeSe)_m(FeTe)_n Superlattice Films

[13p-A1-4] Comparison of various fluorine sources on SmFeAs(O,F) film by MBE growth

[13p-A1-5] Fabrication of laminated film and junction of iron based superconductor SmFeAs(O,F) grown by molecular beam epitaxy (2)

[13p-A1-6] Optimaization of MgB₂ Josephson junctions with calcium fluoride barriers

[13p-A1-7] Annealing effects of MgB₂ thin films fabricated by electron-beam deposition

[13p-A1-8] MgB₂ wires fabricated with boron powders coated with nano-carbon by pyrolysis of coronene

Authentication

Sessions

11 Superconductivity » 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[12p-A1-1~13] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

▲ [12p-A1-3] Tuning the angular variation of JC of YBCO thin films by incorporating different combinations of hybrid APCs

△ [12p-A1-11] Influence of the grain-boundary angle on the in-field critical current density in TFA-MOD Y0.77Gd0.23Ba2Cu3Oy CCs

△ [12p-A1-12] REBa2Cu3O7-x thin films fired under magnetic field by TFA-MOD method

[13p-A1-1~8] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

△ [13p-A1-3] Fabrication and Transport Properties of (FeSe)m(FeTe)n Superlattice Films

Authentication

▲ [12p-A1-3] Tuning the angular variation of J_C of YBCO thin films by incorporating different combinations of hybrid APCs

△ [12p-A1-11] Influence of the grain-boundary angle on the in-field critical current density in TFA-MOD Y_0.77Gd_0.23Ba₂Cu₃O_y CCs

△ [13p-A1-3] Fabrication and Transport Properties of (FeSe)_m(FeTe)_n Superlattice Films