Special Issue: Recent Advances of Powder Processing and Additive Manufacturing

Wed. Oct 28, 2020 9:00 AM - 7:00 PM Room I

This program publishes in order of the Award, Invited, General Talk and within the same category, the names of the presenters (a to z, Japanese syllabary) are listed.

(V) and (S) at the end of the program number are the presentation methods.
　(V): On-demand video distribution
　(S): On-demand slide distribution (presentation slide release)

+Add all to schedule

[1-12(V)] Memorial Lecture of JSPM Award
Development of ultra-thin flake silver powder for conductive materials

〇Yuji Sugitani¹, Seiichi Matsumoto¹, Michio Komatsu¹, Motonori Nishida² (1.FUKUDA Metal Foil & Powder Co.,Ltd., 2.Metal Additive Manufacturing Support System Co., Ltd.)

[1-13(V)] Memorial Lecture of JSPM Award
Development of low magnetic Zr alloys and their additively manufacutured builds for biomedical applications

〇Naoyuki Nomura NOMURA¹ (1.Department of Materials Processing, Graduate School of Engineering, Tohoku University)

[1-14(S)] Invited Talk : Development of titanium alloy powder for additive manufacturing by gas atomization method

〇Takashi ONISHI¹ (1.OSAKA Titanium technologies Co.,Ltd.)

[1-15(V)] Invited Talk : Possibilities and challenges of Binder Jet process

〇Tomo Takahashi¹ (1.PACIFIC SOWA CORPORATION)

[1-16(S)] Invited Talk : Development of EB/PBF 3D Printer

〇Junji Miyata¹ (1.TADA ELECTRIC CO., LTD.)

[1-17(V)] Invited Talk : Latest situation of metal binder jetting additive manufacturing

〇Masahiro Miyamoto¹ (1.Hoganas Japan K.K.)

[1-18A(V)] Fabrication of oxide-dispersion-strengthened pure molybdenum by Laser additive manufacturing

〇Suxia GUO¹, Weiwei ZHOU¹, Zhenxing ZHOU¹, Naoyuki NOMURA¹ (1.Tohoku University)

[1-19A(V)] Laser additive manufacturing of graphene oxide decorated Al alloy powders

〇Dong Mingqi¹, Kamata Kohei¹, Zhou Weiwei¹, Nomura Naoyuki¹ (1.Tohoku University)

※This presenter is a candidate for the Student Award for Outstanding Presentation.

[1-20A(V)] Influence of Hot Isostatic Pressing on the Microstructure and Fracture Toughness of L-PBFed MoSiBTiC Alloy

〇Zhenxing ZHOU¹, Weiwei ZHOU¹, Naoyuki NOMURA¹, Kyosuke YOSHIMI¹ (1.TOHOKU University)

[1-21A(V)] Simultaneously enhanced oxidation resistance and mechanical property of Mo-based composite by laser powder bed fusion

〇Weiwei ZHOU¹, Naoyuki NOMURA¹ (1.Tohoku University)

[1-22A(V)] Analysis of the behavior of powder in the rake process of the powder bed fusion by discrete element method.

〇Yusuke Isono¹, Masayuki Okugawa¹, Yuichiro Koizumi¹ (1.Osaka university)

※This presenter is a candidate for the Student Award for Outstanding Presentation.

[1-23A(V)] Control of material properties and the relating functions of stainless steels using metal additive manufacturing

〇YUKINOBU ITO¹, TAKUYA ISHIMOTO¹, YUSUKE TSUTSUMI², TAKAO HANAWA³, SHI-HAI SUN¹, TAKAYOSHI NAKANO¹ (1.Osaka University, 2.National Inst. of Materials Science, 3.Tokyo Medical and Dental University)

[1-24A(S)] The influence of fully-lamellar and duplex structures on the mechanical properties in Ti-48Al-2Cr-2Nb fabricated by electron beam melting

〇Kana Inoue¹, Yudai Yamagishi¹, Kazuhiro Mizuta¹, Kazuhiro Gokan¹, Koji Kakehi¹ (1.Tokyo metropolitan university)

[1-25A(V)] Clarification of Inclusion Formation Behavior in Additive Manufacturing Process of Ni Base Superalloy

〇Teruki Usuda¹, Shinnosuke Yamada¹, Mototsugu Osaki¹, Toshio Suzuki¹ (1.Daido Steel Co., ltd.)

[1-26A(V)] In situ scanning electron microscopy observation of sintering process of aluminum alloy

〇Naoki Oya¹, Tatsuya Sato¹, Daichi Yamaguchi¹ (1.Ricoh Company, Ltd.)

[1-27A(V)] Evaluation and Suppression of Near-surface Defect in Inconel 718 Fabricated by Laser Powder Bed Fusion

〇Manatsu OGAWAHARA¹, Shinya SASAKI² (1.Graduate School of Engineering, Tokyo University of Science, 2.Tokyo University of Science)

※This presenter is a candidate for the Student Award for Outstanding Presentation.

[1-28A(S)] Microstructures and mechanical properties of selective laser melted aluminumｰtransition metal binary alloys

〇Takahiro Kimura¹, Tomoatsu Ozaki¹, Takayuki Nakamoto¹, Takao Miki¹ (1.Osaka Research Institute of Industrial Science and Technology)

[1-29A(V)] Effect of Contour Scanning on Surface Roughness of Overhanging Structure Fabricated by Laser Powder Bed Fusion

〇Soh SASAKI¹, Shinya SASAKI² (1.Grafuate School of Engineering, Tokyo University of Science, 2.Tokyo University of Science)

※This presenter is a candidate for the Student Award for Outstanding Presentation.

[1-30A(S)] Application of binder jetting method to aluminum material

〇Takafumi SASAKI¹, Naoki OYA¹, Daichi YAMAGUCHI¹, Junjiroh SOGAME¹, Shinichiro SATO¹ (1.RICOH COMPANY, LTD.)

[1-31A(V)] Evaluation of microstructural change in WC/Co cermet by laser-irradiation for applying PBF additive manufacturing

〇Yusuke SHIBA¹, Hiroyuki IBE², Asuka SUZUKI¹, Naoki TAKATA¹, Makoto KOBASHI¹ (1.Nagoya university, 2.FUJIMI INCORPORATED)

※This presenter is a candidate for the Student Award for Outstanding Presentation.

[1-32A(S)] FFF process metal additive manufacturing and future direction of this process

〇Toru Shimizu¹ (1.Tokyo Denki University)

[1-33A(V)] Thermal diffusion simulation for controlling crystallographic texture in additive manufacturing

〇Ryoya SUGANUMA¹, Takuya ISHIMOTO¹, Yoichi TAKAGISHI², Tatsuya YAMAUE², Takayoshi NAKANO¹ (1.Osaka university, 2.Kobelco Research Institute, Inc.)

[1-34A(S)] Hot Cracking Inhibition of CM247LC Fabricated by Selective Laser Melting in Vacuum

〇Shundai DEGUCHI¹, Atsushi HIRAI¹, Naoko SATO², Koji KAKEHI¹ (1.Tokyo Metropolitan University, 2.National Institute of Advanced Industrial Science and Technology)

[1-35A(V)] Densification and crystallographic texture control of pure tungsten by laser powder bed fusion

〇Tsubasa Todo¹, Takuya Ishimoto¹, Takayoshi Nakano¹ (1.Osaka university)

[1-36A(V)] Effect of microstructure on tensile strength of as-sintered steel made of Cu-Mo pre-alloyed steel powder

〇Nao Nasu¹, Kosuke Ashizuka¹, Takuya Takashita¹, Unami Shigeru¹ (1.JFE Steel Corporation)

[1-37A(S)] The Effects of Yttrium Addition on Ni-Based Superalloy Fabricated by Hot Isostatic Pressing

〇Taigi NAGOYA¹, Koji KAKEHI¹, Masahiro ONOI², Tomohiro YONEMOTO² (1.Tokyo Metropolitan University, 2.Metal Technology Co. Ltd.)

[1-38A(S)] Effect of Heat Treatment on Mechanical Properties of Al-Cu-TiB₂ Alloy Fabricated by Selective Laser Melting

〇Kota FUJIWARA¹, Takahiro KIMURA¹, Takayuki NAKAMOTO¹, Takao MIKI¹ (1.Osaka Research Institute of Industrial Science and Technology)

[1-39A(V)] Influence of Median Diameter and Particle size Distribution on Packing Density and Particle Rearrangement of Pure Iron Powder

〇Naoki Yamamoto¹, Takuya Takashita¹, Shigeru Unami¹ (1.JFE Steel Corporation)

Session information

Special Issue: Recent Advances of Powder Processing and Additive Manufacturing

[1-12(V)] Memorial Lecture of JSPM Award
Development of ultra-thin flake silver powder for conductive materials

[1-13(V)] Memorial Lecture of JSPM Award
Development of low magnetic Zr alloys and their additively manufacutured builds for biomedical applications

[1-14(S)] Invited Talk : Development of titanium alloy powder for additive manufacturing by gas atomization method

[1-15(V)] Invited Talk : Possibilities and challenges of Binder Jet process

[1-16(S)] Invited Talk : Development of EB/PBF 3D Printer

[1-17(V)] Invited Talk : Latest situation of metal binder jetting additive manufacturing

[1-18A(V)] Fabrication of oxide-dispersion-strengthened pure molybdenum by Laser additive manufacturing

[1-19A(V)] Laser additive manufacturing of graphene oxide decorated Al alloy powders

[1-20A(V)] Influence of Hot Isostatic Pressing on the Microstructure and Fracture Toughness of L-PBFed MoSiBTiC Alloy

[1-21A(V)] Simultaneously enhanced oxidation resistance and mechanical property of Mo-based composite by laser powder bed fusion

[1-22A(V)] Analysis of the behavior of powder in the rake process of the powder bed fusion by discrete element method.

[1-23A(V)] Control of material properties and the relating functions of stainless steels using metal additive manufacturing

[1-24A(S)] The influence of fully-lamellar and duplex structures on the mechanical properties in Ti-48Al-2Cr-2Nb fabricated by electron beam melting

[1-25A(V)] Clarification of Inclusion Formation Behavior in Additive Manufacturing Process of Ni Base Superalloy

[1-26A(V)] In situ scanning electron microscopy observation of sintering process of aluminum alloy

[1-27A(V)] Evaluation and Suppression of Near-surface Defect in Inconel 718 Fabricated by Laser Powder Bed Fusion

[1-28A(S)] Microstructures and mechanical properties of selective laser melted aluminumｰtransition metal binary alloys

[1-29A(V)] Effect of Contour Scanning on Surface Roughness of Overhanging Structure Fabricated by Laser Powder Bed Fusion

[1-30A(S)] Application of binder jetting method to aluminum material

[1-31A(V)] Evaluation of microstructural change in WC/Co cermet by laser-irradiation for applying PBF additive manufacturing

[1-32A(S)] FFF process metal additive manufacturing and future direction of this process

[1-33A(V)] Thermal diffusion simulation for controlling crystallographic texture in additive manufacturing

[1-34A(S)] Hot Cracking Inhibition of CM247LC Fabricated by Selective Laser Melting in Vacuum

[1-35A(V)] Densification and crystallographic texture control of pure tungsten by laser powder bed fusion

[1-36A(V)] Effect of microstructure on tensile strength of as-sintered steel made of Cu-Mo pre-alloyed steel powder

[1-37A(S)] The Effects of Yttrium Addition on Ni-Based Superalloy Fabricated by Hot Isostatic Pressing

[1-38A(S)] Effect of Heat Treatment on Mechanical Properties of Al-Cu-TiB₂ Alloy Fabricated by Selective Laser Melting

[1-39A(V)] Influence of Median Diameter and Particle size Distribution on Packing Density and Particle Rearrangement of Pure Iron Powder

Authentication