ポスターセッション

一般ポスターセッション

Thu. Jun 22, 2023 12:00 PM - 12:40 PM Room P1 (P会場)

+Add all to schedule

[P-001] Improving of Strength around Flow Front Meeting Area in Molded Products by Core Pin Driving Method inside Injection Mold

*tomohiro hishida¹, atsushi motegi¹, yasuhiko murata² (1. PLAMO Co., Ltd, 2. Nippon Institute of Technology)

[P-003] Effect of fiber orientation on mechanical properties of long fiber reinforced thermoplastics

*Yuta Amano¹, Gen Aoki¹, Kai Sakakibara¹, Yuhsuke Hamano¹ (1. POLYPLASTICS CO., LTD.)

[P-007] Material property evaluation of resin solidification process of foam molded product using digital image correlation method

*Takuhei Tsukada¹, Seiji Yamamoto¹ (1. POLYPLASTICS CO., LTD.)

[P-009] Study on internal temperature of compounds and moldability in cross-linked foam molding

*Tetsuya Sasamori¹, Yusuke Yoshikawa¹, Kotaro Hata¹ (1. MIZUNO CORPORATION)

[P-011] Multimodal AI Technology towards Digital Transformation of Material Analysis

*Shun Muroga¹, Naoyuki Matstumoto¹, Ken Kokubo¹, Toshiya Okazaki¹, Kenji Hata¹ (1. AIST)

[P-013] Molecular Dynamics Simulation of Polymer Crystallization and Melt Memory Effects;
Liquid structure and recrystallization mechanisms and large deformation and fracture of crystalline structures

*Takashi Yamamoto¹, Hussain Althaf², Shigeru Yao² (1. Yamaguchi Univ., 2. Fukuoka Univ.)

[P-015] Seawater biodegradability and various applications of polyrotaxane materials

*Shota ANDO¹, Kohzo ITO¹ (1. The University of Tokyo)

[P-017] Molding pressure dependence on physical properties and lamellar structure of mechanical recycled polyethylene reprocessed by dynamic shear treatment

*Patchiya Phanthong¹, Shigeru Yao¹ (1. Fukuoka Univ.)

[P-019] New Textile made from Air

*toshikazu umemura¹, akio ohtani², ryo marui³, hayato tamoi⁴, toshikazu umemura¹ (1. Plaisir Co.,Ltd., 2. Kyoto Institute of Technology, 3. Marui Textile Machinery Co., Ltd., 4. Tayuh Textile Industry Corp.)

[P-021] Development of flame retardant cellulose resin composition

*Yuto Sano¹, Kiyohiko Toyama¹, Shukichi Tanaka¹, Midori Yamashiro¹, Takuma Ozawa² (1. NEC Corporation Research & Development Division, 2. NEC Platforms, Ltd. Product DevelopmentOperations Unit Technology Division 4th Productdesign Engineering Group)

[P-023] Development of 380-420nm selectively absorbable new triazine and benzotriazole-type ultraviolet absorbers with remarkable heat resistance

*AKIHO IMURA¹, Kazuma Takekoshi¹, Nobuhiro Kaneko¹, Kotaro Kaneko¹, Koji Kawai¹ (1. Miyoshi Oil & Fat Co.,Ltd. )

[P-025] Durability enhancement of metal mold and molding equipment by nitriding treatment in the electron-beam-excited plasma

YASUYUKI GONDA¹, *tamio hara², shinji kiboshi¹ (1. Kiso Industry Co.,Ltd., 2. Plasma Research & Development Laboratory Co.,Ltd.)

ポスターセッション

一般ポスターセッション

Thu. Jun 22, 2023 12:40 PM - 1:20 PM Room P1 (P会場)

+Add all to schedule

[P-002] Joining strength improvement between polymer and blasted steel via heat treatment

*Weiyan Chen¹, Fuminobu Kimura¹, Eiji Yamaguchi², Yukinori Suzuki², Yuuka Ito², Yusuke Kajihara¹ (1. The University of Tokyo, 2. SINTOKOGIO, Ltd.)

[P-004] Improving fluidability of PP/GF by high-shear rate processing and thin-wall injection molding

*Yuya Sasai¹, Yoshio Iizuka¹, Katsunori Kobayashi¹, Kaho Osada¹, Kentaro Taki² (1. Shibaura Machine, 2. Kanazawa Univ.)

[P-006] Crystallization Kinetics in Non-isothermal Process of PolypropyleneⅡ

*Shuhei Yasuda^1,2, Tsuguhisa Miyamoto¹, Ken Taguchi², Akihiko Toda² (1. Mazda Motor Corporation, 2. Hiroshima University)

[P-008] Recycling of cotton/polyester blend fabrics using hydrothermal treatment

*Mei Matsumura¹, Jun Inagaki¹, Ryo Yamada², Natsuko Tashiro², Katsuya Ito¹, Mitsuru Sasaki² (1. TOYOBO CO.,LTD., 2. Kumamoto Univ.)

[P-010] Internal strain measurement of laser welded products using FBG sensor

*Yu Yanagisawa¹, Takuhei Tsukada¹, Akira Okada¹ (1. Polyplastics Co., Ltd.)

[P-012] Evaluation of photo-oxidation of Polyethylene using an automatic photo-stability evaluation system

*Ryota Sameshima¹, Mariko Takahashi¹, Tetsu Sato¹, Rie Yamada¹, Itsuo Tanuma¹, Satoru Hosoda² (1. Tohoku Electronic Industrial CO.,Ltd., 2. Kyoto Institute of Technology)

[P-016] Preparation of polyrotaxane-containing vitrimers with both toughness and recyclability

*Shota ANDO¹, Masaki Hirano¹, Hideaki Yokoyama¹, Kohzo Ito¹ (1. University of Tokyo)

[P-018] Development of Amine-Epoxy/Poly(vinyl alcohol) Nanofiber Webs for Direct
CO2 Capture from the Air through In-situ Polymerization Electrospinning

*Chisato Goto Goto^1,2, Hou Zongzi², Hiroaki Imoto², Kensuke Naka², Takeshi Kikutani^3,2, Midori Takasaki² (1. Nitto Denko Corporation, 2. Kyoto Institute of Technology, 3. Tokyo Institute of Technology)

[P-020] Fabrication of transparent glass fiber composites using miscible polymer blends

*Yoshimi Muraoka¹, Takayuki Hirai, Hirotaka Okamoto (1. TOYOTA CENTRAL R&D LABS., INC.)

[P-022] The effect of new nucleating agent for polylactic acid

*Riho Nishikawa¹, Shohei Iwasaki¹, Takahiro Inoue^1,2, Takumitsu Kida², Masayuki Yamaguchi² (1. New Japan Chemical Co., Ltd., 2. Japan Advanced Institute of Science and Technology)

[P-024] Addition Method of Magnesium Oxysulfate to Polycarbonate and Its Mechanical Property Improvement Effect

*kazuki yoshihara¹, Tooru Inagaki¹, Tetsuo Takayama² (1. Ube Material Industries,Ltd., 2. Yamagata Univ.)

[P-026] Fabrication of energy absorber by stacking polyamides having different stiffness

*Shin Oyama¹, Takayuki Hirai¹, Takashi Sasagawa¹, Hidekazu Nishigaki¹, Kazuhiko Umemoto¹ (1. Toyota Central R&D Labs. Inc.)

Sessions

ポスターセッション » 一般ポスターセッション

一般ポスターセッション

[P-001] Improving of Strength around Flow Front Meeting Area in Molded Products by Core Pin Driving Method inside Injection Mold

[P-003] Effect of fiber orientation on mechanical properties of long fiber reinforced thermoplastics

[P-007] Material property evaluation of resin solidification process of foam molded product using digital image correlation method

[P-009] Study on internal temperature of compounds and moldability in cross-linked foam molding

[P-011] Multimodal AI Technology towards Digital Transformation of Material Analysis

[P-013] Molecular Dynamics Simulation of Polymer Crystallization and Melt Memory Effects;
Liquid structure and recrystallization mechanisms and large deformation and fracture of crystalline structures

[P-015] Seawater biodegradability and various applications of polyrotaxane materials

[P-017] Molding pressure dependence on physical properties and lamellar structure of mechanical recycled polyethylene reprocessed by dynamic shear treatment

[P-019] New Textile made from Air

[P-021] Development of flame retardant cellulose resin composition

[P-023] Development of 380-420nm selectively absorbable new triazine and benzotriazole-type ultraviolet absorbers with remarkable heat resistance

[P-025] Durability enhancement of metal mold and molding equipment by nitriding treatment in the electron-beam-excited plasma

一般ポスターセッション

[P-002] Joining strength improvement between polymer and blasted steel via heat treatment

[P-004] Improving fluidability of PP/GF by high-shear rate processing and thin-wall injection molding

[P-006] Crystallization Kinetics in Non-isothermal Process of PolypropyleneⅡ

[P-008] Recycling of cotton/polyester blend fabrics using hydrothermal treatment

[P-010] Internal strain measurement of laser welded products using FBG sensor

[P-012] Evaluation of photo-oxidation of Polyethylene using an automatic photo-stability evaluation system

[P-016] Preparation of polyrotaxane-containing vitrimers with both toughness and recyclability

[P-018] Development of Amine-Epoxy/Poly(vinyl alcohol) Nanofiber Webs for Direct
CO2 Capture from the Air through In-situ Polymerization Electrospinning

[P-020] Fabrication of transparent glass fiber composites using miscible polymer blends

[P-022] The effect of new nucleating agent for polylactic acid

[P-024] Addition Method of Magnesium Oxysulfate to Polycarbonate and Its Mechanical Property Improvement Effect

[P-026] Fabrication of energy absorber by stacking polyamides having different stiffness

Authentication