[P43] Effect of resin flow on fiber orientation behavior during reinforced injection molding process

*Junya Kobayashi¹, Masahiro Seto¹, Tohru Suzuki¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[P44] Study on both weight saving by injection foam molding and strength improvement by fiber reinforced resin

*Yasuhiro Kitamoto¹, Masahiro Seto¹, Tohru Suzuki¹, Masashi Yamabe¹ (1. Kanazawa Institute of Technology)

[P45] Effects of resin flow behavior at the confluence of flow front on fiber orientation and physical properties.

*Shogo Ogura¹, Masahiro Seto², Masashi Yamabe² (1. KYB Corporation, 2. Kanazawa Institute of Tcchnology)

[P46] Visualization of material variation of recycled polypropylene using in-mold sensor

*Ryotaro Shimada¹, Daisuke Yagi¹, Kan Kobayashi¹, Hiroki Nakatsuchi¹ (1. Hitachi, Ltd.)

[P47] Effect of Molding Conditions on Internal Structure and Mechanical Properties of Injection Molded Products with High Fiber Content

*Hayato Kikuta¹, Akio Ohtani¹ (1. Kyoto Institute of Technology)

[P48] Prediction method of physical properties of short fiber reinforced injection molded
article using fiber orientation distribution

Atsushi Yokoyama¹, *Yu Toda¹, Senji Hamanaka², Chisato Nonomura² (1. Kyoto Institute of Technology, 2. Toyobo CO.LTD)

[P49] Evaluation of devolatilization for internal mixier

*Sho Harada¹, Kosuke Higashi¹, Yasuaki Yamane¹ (1. KOBE STEEL, LTD.)

[P50] Evaluation of Residual Stress in Sports Mouthguards after Molding by Optical Measurement

*Keita MASUI¹, Akiomi USHIDA¹, Taisuke SATO¹ (1. Niigata Univ.)

[P51] Vacuum molding property of polypropylene-composite resin

*Masashi Fujita¹, Tasuku Izutani¹, Hajime Sotokawa¹, Chigusa Nagano¹ (1. Mitsubishi Electric Corporation)

[P52] Drawing Behavior of Films of Polyoxymethylene with Comonomer and Application to Biaxial Drawing

*Wataru Shimabukuro¹, Masaki Kakiage¹, Hiroki Uehara¹, Takeshi Yamanobe¹, Daisuke Sunaga², Tsuyoshi Ikeda² (1. Grad. Sch. of Sci. and Tec., Gunma Univ., 2. Mitsubishi Engineering-Plastics Corporation)

[P53] Film properties of novel linear ethylene ionomers with both high transparency and excellent stiffness-toughness balance

*Kohei Takamitsu¹, Shin Aoki¹, Masahiro Uematsu¹, Takaaki Hattori¹, Hajime Ikeno¹ (1. Japan Polyethylene Corporation)

[P54] Uniaxial drawing behavior of ultra-high molecular weight polyethylene films with different crystalline structures prepared by biaxial melt-drawing

*Akito Wakui¹, Masaki Kakiage¹, Hiroki Uehara¹, Takeshi Yamanobe¹ (1. Grad. Sch. of Sci. and Tech. , Gunma Univ.)

[P55] Hydrophobic polymer gel fibers produced by photoreactive electrospinning

*Hiroto Sakurai¹, Jin Gong¹, Kohei Takahashi¹ (1. graduate school of science and engineering)

[P56] Fabrication of porous polymer films by photo-induced phase separation: drying characteristics

*Junnosuke Isobe¹, Yoshihide Mawatari¹, Yasuhiro Saito¹, Masato Yamamura¹ (1. Kyushu Institute of Technology)

[P57] Construction of a new polymer foaming system for high through-put development and analyses of color, shape and sound on extruding

*Satoshi Yoda¹, Seisuke Ata¹, Yoshihiro Takebayashi¹, Takumi Ono¹, Kiwamu Sue¹, Tetsuro Tai², Daichi Kageyama² (1. National Institute of Advanced Industrial Science and Technology (AIST), 2. Sekisui Kasei Co., Ltd./ ADMAT)

[P58] Preparation and Characterization of PLA/PBSA foams shown a Millefeuille-like Cell Structure by the Core-back Foam Injection Molding

*DONGHO KIM¹, Yuta Hikima¹, Masahiro Ohshima¹ (1. Kyoto Univ.)

[P59] A visual observation of bubble nulceation in crystalizing molten polypropylene

*Kenta Ushida¹, Hideo Akimoto³, Hisahiro Tanaka², Masato Goto², Kentaro Taki¹ (1. Kanazawa Univ., 2. Saeilo Japan, 3. Akimoto CE)

[P60] Research on plastic circulation system suitable for bioeconomy

*Keita Ono¹ (1. Doshisha Univ)

Cancelled

[P61] Fabrication of Highly Durable Microstructures from HDPE/UHMWPE Blends by Special Melt-Kneading

*shinya kato¹, Akira Ishigami¹, Yutaka Kobayashi¹, Hiroshi Ito¹ (1. Yamagata Univ.)

[P62] Trace of structural changes during drawing and subsequent heating for ethylene ionomers

*Takumi Tsurugai¹, Masaki Kakiage¹, Hiroki Uehara¹, Takeshi Yamanobe¹ (1. Grad. Sch. of Sci. and Tec. , Gunma Univ.)

Session information

ポスター（P43～62）