*J. Shipley¹, A. Magnusson¹, M. Karlsson², C. Beamer³ (1.Quintus Technologies AB, Sweden, 2.Quintus Technologies, Japan, 3.Quintus Technologies LLC, USA)

*K. Asami^1,2, D. Herzog^1,3, T. Deutschmann^1,4, T. Röver^1,2, I. Kelbassa^1,3, C. Emmelmann^1,2 (1.Hamburg University of Technology, Germany, 2.Institute of Laser and Systems Technology, Germany, 3.Institute for Industrialization of Smart Materials, Germany, 4.Institute of Product Development and Mechanical Engineering Design, Germany)

*E. Hryha¹ (1.Centre for Additive Manufacturing Metal CAM2 Chalmers University of Technology, Sweden)

*H. Tang¹, H. Lin¹ (1.Hangzhou City University, China)

*Y. Chivel¹ (1.Merphotonics, France)

*J. Crego Lozares^1,2, A. E. Medvedev¹, K. Asami², C. Emmelmann², A. Molotnikov¹, M. Brandt¹ (1.RMIT Centre for Additive Manufacturing, Royal Melbourne Institute of Technology, School of Engineering, Australia, 2.Institute of Laser and System Technologies, Hamburg University of Technology, Germany)

*K. Yamanaka¹, S. Aota¹, M. Mori², N. Sasaki¹, J. Adrien³, E. Maire³, D. Fabregue³, A. Chiba¹ (1.Tohoku University, Japan, 2.National Institute of Technology, Sendai College, Japan, 3.INSA Lyon, France)

*P. Koenig¹, S. Weber¹, J. Lentz¹ (1.Ruhr University Bochum, Germany)

F. Deirmina¹, *R. Sandburg¹, H. Magnusson² (1.Sandvik additive manufacturing, Sweden, 2.Swerim AB, Sweden)

*M. Wu¹, Z. Shih¹, M. Ku¹, C. Li², C. Zhong¹, S. Chang¹, Y. Tsai¹ (1.National Taipei University of Technology, Taiwan, 2.Voestalpine Technology Institute (Asia) Co. Ltd., Taiwan)

*W. Jeong¹, Y. Chun², S. Kang², C. Rhee², H. Kim³, H. Ryu¹ (1.Korea Advanced Institute of Science and Technology, Korea, 2.Korea Atomic Energy Research Institute, Korea, 3.HANA AMT, Korea)

*A. Yanagitani¹, H. Takeuchi¹, A. Hirayama², T. Kaneyoshi², T. Yamasaki² (1.University of Hyogo, Japan, 2.Hyogo Prefectural Institute of Technology, Japan)

*T. Kawaguchi¹ (1.KOBE STEEL, LTD., Japan)

*K. Doi¹, N. Nishi¹, Y. Miyazaki¹, M. Ito¹, N. Aoe², T. Shimizu³, H. Shimizu³, A. Nishimoto², S. Terauchi¹ (1.Osaka Yakin Kogyo Co., Ltd., Japan, 2.Kansai University, Japan, 3.Japan Silicolloy Industry Co., Ltd., Japan)

*D. Lee¹, S. Lee¹, C. Dhin Van¹, C. Kim¹, J. Kim¹, H. Kim², J. Lim³, T. Yoon³ (1.University of Ulsan, Korea, 2.Korea Institute of Industrial Technology, Korea, 3.DaiShinKangup Co.,Ltd, Korea)

*W. Jeong¹, T. Lee², S. Youn², M. Lee¹, H. Kim³, H. Ryu¹ (1.Korea Advanced Institute of Science and Technology, Korea, 2.Korea Institute of Materials Science, Korea, 3.HANA AMT, Korea)

*A. Morishige¹, T. N. Palleda¹, K. Kakehi¹, A. Miyakita², K. Masuda², T. Sato² (1.Tokyo Metropolitan University, Japan, 2.JEOL, Japan)

*J. Ku¹, J. Lee¹, E. Kim¹, Y. Kim¹, E. Park¹, C. Jeon¹ (1.EML (Eloi Materials) Co., Ltd., Korea)

P. Mellin¹, J. Gårdstam², S. Heino¹, J. Shipley², *A. Magnusson², F. Forsberg³, B. Forsgren⁴, P. Waernqvist⁴ (1.Swerim AB, Sweden, 2.Quintus Technologies AB, Sweden, 3.Luleå University of Technology, Sweden, 4.Ringhals AB, Sweden)

*R. Gunnerek¹, T. Mishurova², G. Bruno², E. Hryha¹ (1.Chalmers University of Technology, Sweden, 2.Bundesanstalt für Materialforschung und -prüfung (BAM), Germany)

A. Mohammadzadeh^1,2, A. De Nardi^2,3, *J. M. Torralba^2,4 (1.Department of Materials Engineering, Faculty of Engineering, University of Maragheh, Iran, 2.IMDEA Materials Institute, Spain, 3.Politecnico di Torino, Italy, 4.Universidad Carlos III de Madrid, Spain)

S. Kumaran^1,2, B. Malladi³, A. Meza¹, E. Hryha³, *J. M. Torralba^1,2 (1.IMDEA Materials Institute, Spain, 2.Universidad Carlos III de Madrid, Spain, 3.Chalmers university of technology, Sweden)

*S. Kariya¹, H. Hanada², A. Issariyapat¹, T. Teramae², J. Huang², J. Umeda¹, K. Kondoh¹ (1.Osaka University, JWRI, Japan, 2.Osaka University, Japan)

*Z. Zhou¹, W. Zhou¹, N. Nomura¹ (1.Tohoku University, Japan)

*N. Arcieri¹, D. Manfredi^1,2, M. Actis Grande³ (1.Department of Applied Science and Technology (DISAT), Politecnico di Torino, Italy, 2.Istituto Italiano di Tecnologia (IIT), Center for Sustainable Future Technologies CSFT@Polito, Italy, 3.Department of Applied Science and Technology (DISAT), Politecnico di Torino, Italy)

Y. Watanabe^1,2, *M. Tange^1,3, Y. Kanaya^1,2, H. Okuyama¹, S. Tanaka¹ (1.Micro MIM Japan Holdings Inc., Japan, 2.Taisei Kogyo Co., Ltd., Japan, 3.Taisei Kogyo (Thailand) Co., Ltd., Thailand)

*J. Stajkovic¹, M. Kahl¹, L. Kaserer¹, J. Braun¹, B. Distl², B. Mayr-Schmöelzer², G. Leichtfried¹ (1.Faculty of Engineering Sciences, Department of Mechatronics, Materials Science, University of Innsbruck, Austria, 2.Plansee SE, Austria)

*K. Imai¹, Y. Sugitani¹, S. Matsumoto¹, Y. Shimpo¹, H. Kyogoku² (1.FUKUDA Metal Foil and Powder Co., Ltd., Japan, 2.Kindai University Fundamental Technology for Next Generation Research Institute, Japan)