Sessions

A.Material & Construction » Geo-polymer / New material & Construction (material)

The 41st JCI Technical Conference

Geo-polymer Ⅰ

Fri. Jul 12, 2019 9:30 AM - 11:45 AM Room 5 (Meeting Room 107)

座長:合田寛基(土木), 新大軌(建築)

+Add all to schedule

[1317] Time development of the properties of the alkali activated slag containing zinc oxide

Shoko FURUE, Go IGARASHI, Tomoya NISHIWAKI (東北大学)

[1318] Preparation and characteristics of geopolymer mortar cured at room temperature for plastering

Motoki UEHARA¹, Takatsune SATO¹, Masao KOSAKA², Masahiro YANAGUCHI³ (1.鉄道総合技術研究所, 2.カドヤ工業, 3.タカボシ)

[1319] Influence of Mixing Method of Geopolymer Mortar and Mixture Ratio of Imitation Dry Sludge Powder on Compressive Strength

So GOTO¹, Toshitugu INUKAI¹, Akihiro MAEGAWA², Takashi HIROSE³ (1.岐阜工業高等専門学校, 2.三重県工業研究所, 3.丸治コンクリート工業所)

[1320] Ｆｕｎｄａｍｅｎｔａｌ　Ｓｔｕｄｙ　ｏｎ　Ｅｌａｓｔｉｃ　Ｍｏｄｕｌｕｓ　ｏｆ　Ｇｅｏｐｏｌｙｍｅｒ　ｗｉｔｈ　Ｄｉｆｆｅｒｅｎｔ　Ｃｏｍｐｒｅｓｓｉｖｅ　ｓｔｒｅｎｇｔｈ　ａｎｄ　Ａｇｇｒｅｇａｔｅ　Ｃｏｎｔｅｎｔ

palamy phommahaxay, Akitoshi ITO, Shigemitsu HATANAKA (三重大学)

[1321] Influencing factors of mechanical properties of geopolymer concrete using fly ash and blast furnace slag

Zhuguo LI¹, Hitoshi TAKAKIGAI², Tomohisa OKADA³, Susumu HASHIZUME³ (1.山口大学, 2.三重県建設資材試験センター, 3.東邦化学工業)

[1322] Study on strength development and crack injection properties of geopolymer using blast furnace slag fine powder with different specific surface area

Saya IOROI, Akitoshi ITO, Shigemitsu HATANAKA (三重大学)

[1323] Fundamental Study on Flow Value and Compressive Strength of Geopolymer Paste with Silica Fume

Akitoshi ITO¹, Palamy Phommahaxay¹, Akihiro MAEGAWA², Shigemitsu HATANAKA¹ (1.三重大学, 2.三重県工業研究所)

[1324] Ｒelationship between degradation of surface layer of fly ash type geopolymers and test environment and condition of silane type surface impregnated materials

Kazuo ICHIMIYA¹, Koji HARADA², Shunji TSUGO³, Ko IKEDA⁴ (1.大分工業高等専門学校, 2.西松建設, 3.日本興業, 4.山口大学名誉教授)

[1325] Relationship between compressive strength and pore structure of geopolymer with different mixture ratio of BF and FA

GAOYU LIAO, Takafumi NOGUCHI, Atushi TOMOYOSE, Qingkai CHEN (東京大学)

The 41st JCI Technical Conference

Geo-polymer Ⅱ / New material & Construction (material)

Fri. Jul 12, 2019 1:00 PM - 3:15 PM Room 5 (Meeting Room 107)

座長:一宮一夫(土木), 梅本宗宏(建築)

+Add all to schedule

[1326] Influence of water glasses with different storage periods on geopolymer mortar

Masashi SUTO¹, Riho OKASHIRO¹, Ryunosuke MISHIRO¹, Daiki ATARASHI² (1.松江工業高等専門学校, 2.島根大学)

[1327] EFFECT OF GGBS ADDITION ON PROPERTIES OF FLY ASH-BASED GEOPOLYMER AT HIGH TEMPERATURES

Apriany SALUDUNG¹, Kenji KAWAI², Yuko OGAWA² (1.Hiroshima University, 2.広島大学)

[1328] FATIGUE STRENGTH AND DEFORMATION BEHAVIOR OF FLY ASH-BASED GEOPOLYMER CONCRETE

Ryojiro KATO¹, Chikako FUJIYAMA¹, Jaya Ekaputri Januarti² (1.法政大学, 2.Institut Teknologi Sepuluh Nopember)

[1329] WORKABILITY AND COMPRESSIVE STRENGTH OF Na2SiO3-ACTIVATED GEOPOLYMER MORTAR CURED AT AMBIENT TEMPERATURE

Shaoqi HUANG, Yukun ZHANG, Yihan BAI, Lin AN (Kyoto University)

[1330] Properties of iron and steel slag hydrated matrix exposed in sea area for 11 years

Yotaro INOUE, Hisahiro MATSUNAGA, Katsunori TAKAHASHI (JFEスチール)

[1331] EXPERIMENTAL STUDY ON PROPERTIES AND THE FROST RESISTANCE OF CONCRETE CONTAINING MOLTEN SLAG FROM INTEGRATED COAL GASIFICATION COMBINED CYCLE AS FINE AGGREGATE

Ryotaro KOBAYASHI, Hiromi FUJIWARA, Masanori MARUOKA, Takahumi WATANABE (宇都宮大学)

[1332] Fundamental study on coefficient of linear expansion and drying shrinkage of Rammed earth brock

Haruka SUGIYAMA, Keiichi IMAMOTO, Chizuru KIYOHARA (東京理科大学)

[1333] Experimental study on in situ quality evaluation method of cementitious materials suitable for 3D printing

Satoshi MURATA¹, Koji KINOMURA¹, Shinpei MAEHORI², Masachika MIYAMOTO² (1.大成建設, 2.太平洋セメント)

[1334] Fabrication and Performance of Various Fiber Reinforced Porosity Free Concrete for Coast Retaining Wall Repair Panels

Katsuya KONO, Eiki YASUDA, Daisuke KOGAME, Katsuhiko TADA (太平洋セメント)